Reliable sampling technology for deep-sea sediments is a prerequisite for studying the sedimentary environment in the geological history, the mechanical characteristics of sediments and sediment biology. In this study, we develop a new sampling device in order to achieve a convenient and economic pressure sampling for hadal sediments. The overall structure, as well as the key component such as the pressure-holding part, and the sealing structure are designed. The feasibility of the device was verified through field tests. Furthermore, the sampling process is analyzed by the computer simulation. It is found that the sampling length is determined by the open diameter and the installation position of the core keepers. According to the simulation, the structure is optimized, which is beneficial to the further improvement of the sampling length.
With the increase in the scale and complexity of underwater engineering, safety problems caused by underwater deformation have become increasingly prominent. Although the intensity fiber curvature sensor can be used for curvature monitoring on the ground, its sensing mechanism is still under investigation. This paper establishes the mathematical model of optical power relative loss and bending radius during deformation of the fiber sensitive region and uses the optical power meter to measure light intensity loss in the sensitive region, which verifies the correctness of the model and reveals the sensing mechanism of the intensity fiber curvature sensor, then optimizes the sensor signal conditioning circuit, applies the sensor to the single-point deformation curvature measurement, and analyzes its measurement error and accuracy. It is proved that the linear measurement range of the sensor is improved when compared with existing similar products.