In this letter, a compact octagonal shaped fractal ultrawideband multiple-input-multiple-output antenna is presented, and its characteristics are investigated. In order to achieve the desired miniaturization and wideband phenomena, self-similar and space filling properties of Koch fractal geometry are used in the antenna design. These fractal monopoles are placed orthogonal to each other for good isolation. Moreover, grounded stubs are used in the geometry to provide further improvement in the isolation. The band rejection phenomenon in wireless local area network band is achieved by etching a C-shaped slot from the monopole of the antenna. The proposed antenna has compact dimensions of 45 mm × 45 mm and exhibits quasi-omnidirectional radiation pattern. In addition, it shows an impedance bandwidth (S 11 <; -10 dB ) from 2 to 10.6 GHz with isolation better than 17 dB over the entire ultra-wideband range. Diversity performance is also evaluated in terms of envelope correlation coefficient and capacity loss. The measured results show good agreement with the simulated ones.
Deep learning (DL) is a newly addressed area of research in the field of modulation classification. In this letter, a constellation density matrix (CDM) based modulation classification algorithm is proposed to identify different orders of ASK, PSK, and QAM. CDM is formed through local density distribution of the signal’s constellation generated using LabVIEW for a wide range of SNR. Two DL models, ResNet-50 and Inception ResNet V2 are trained through color images formed by filtering the CDM. Classification accuracy achieved demonstrates better performance compared to many existing classifiers in the literature.
1 December 2014 in IET Microwaves, Antennas & Propagation
In this study, a design approach to achieve multiresonance phenomena in ultra‐wideband (UWB) bandwidth using fractal geometry is investigated. The introduction of Koch fractal geometry in monopole as well as in the ground plane of the antenna generates additional resonances, which helps to achieve entire UWB operational bandwidth. Therefore the bandwidth is increased up to 122%. Moreover, the fractal nature of the antenna also facilitates to obtain the stable radiation pattern. The compact dimension 31 mm × 28 mm of the antenna exhibits nearly omnidirectional radiation pattern, with good reflection coefficient over the entire UWB frequency range. The proposed prototype is fabricated and its measured results are in good agreement with the simulated one. The time‐domain analysis of the antenna is performed and it is found that fidelity factor is better than 0.81, which shows good pulse preserving capability of the antenna.
9 November 2010 in IEEE Transactions on Instrumentation and Measurement
This work proposes a novel prototype-based engine fault classification scheme employing the audio signature of engines. In this scheme, Fourier transform and correlation methods have been used. Notably, automated audio classification has immense significance in the present times, used in both audio-based content retrieval and audio indexing in multimedia industry. Likewise, it is also becoming increasingly important in automobile industries. It has been observed that real world automobile engine audio data are contaminated with substantial noise and out fliers. Hence, it is challenging to categorize different fault types in different engines. Accordingly, the present paper discusses a methodology where a set of algorithms checks the state of an unknown engine as either healthy or faulty. Fault categorizing algorithm is based on its cross- and autocorrelation coefficient values. Appropriately, in this study, the engine amplitude-frequency values of fast Fourier transform are calculated and subdivided into bands to calculate the correlation coefficient matrix. The correlation coefficient matrix for the unknown engine is then calculated and matched with this “prototype” engine matrix to categorize it into a single or multiple fault(s). It is worth mentioning here that although a rank-based maximum close scheme is adopted for finding the unknown engine's fault, the work can be extended to any other parametric and neural network-based classification scheme. Keeping this background in mind, the present paper discusses the proposed methodology to find a prototype engine, unknown engine classification, implementation on real audio signal for single cylinder engine data, and its results.