Plate impact experiments have been carried out to examine the influence of grain boundary characteristics on the dynamic tensile response of Cu samples with grain sizes of 30, 60, 100, and 200 μm. The peak compressive stress is ∼1.50 GPa for all experiments, low enough to cause an early stage of incipient spall damage that is correlated to the surrounding microstructure in metallographic analysis. The experimental configuration used in this work permits real-time measurements of the sample free surface velocity histories, soft-recovery, and postimpact examination of the damaged microstructure. The resulting tensile damage in the recovered samples is examined using optical and electron microscopy along with micro x-ray tomography. The free surface velocity measurements are used to calculate spall strength values and show no significant effect of the grain size. However, differences are observed in the free surface velocity behavior after the pull-back minima, when reacceleration occurs. The magnitude of the spall peak and its acceleration rate are dependent upon the grain size. The quantitative, postimpact, metallographic analyses of recovered samples show that for the materials with grain sizes larger than 30 μm, the void volume fraction and the average void size increase with increasing grain size. In the 30 and 200 μm samples, void coalescence is observed to dominate the void growth behavior, whereas in 60 and 100 μm samples, void growth is dominated by the growth of isolated voids. Electron backscatter diffraction (EBSD) observations show that voids preferentially nucleate and grow at grain boundaries with high angle misorientation. However, special boundaries corresponding to Σl (low angle, < 5 °) and Σ3 (∼60 ° misorientation) types are more resistant to void formation. Finally, micro x-ray tomography results show three dimensional (3D) views of the damage fields consistent with the two dimensional (2D) surface observations. Based on these findings, mechanisms for the void growth and coalescence are proposed.

Scientific digital imaging in three dimensions such as when using X-ray computed tomography offers a variety of ways to obtain, filter, and quantify data that can produce vastly different results. These opportunities, performed during image acquisition or during the data processing, can include filtering, cropping, and setting thresholds. Quantifying features in these images can be greatly affected by how the above operations are performed. For example, during binarization, setting the threshold too low or too high can change the number of objects as well as their measured diameter. Here, two facets of three-dimensional quantification are explored. The first will focus on investigating the question of how many voxels are needed within an object to have accurate geometric statistics that are due to the properties of the object and not an artifact of too few voxels. These statistics include but are not limited to percent of total volume, volume of the individual object, Feret shape, and surface area. Using simple cylinders as a starting point, various techniques for smoothing, filtering, and other processing steps can be investigated to aid in determining if they are appropriate for a specific desired statistic for a real dataset. The second area of investigation is the influence of post-processing, particularly segmentation, on measuring the damage statistics in high purity Cu. The most important parts of the pathways of processing are highlighted.

Advances in target fabrication have made double shell capsule implosions a viable platform to study burning fusion plasmas. Central to the double shell capsule is a high-Z (e.g., Au) metal pusher that accesses the volume-burn regime by reducing radiative losses through radiation trapping and compressing a uniform fuel volume at reduced velocities. A double shell implosion relies on a series of energy transfer processes starting from x-ray absorption by the outer shell, followed by transfer of kinetic energy to an inner shell, and finally conversion of kinetic energy to fuel internal energy. We present simulation and experimental results on momentum transfer to different layers in a double shell. We also present the details of the development of the NIF cylindrical hohlraum double shell platform including an imaging shell design with a mid-Z inner shell necessary for imaging the inner shell shape and the trajectory with the current 2DConA platform capability. We examine 1D energy transfer between shell layers using trajectory measurements from a series of surrogate targets; the series builds to a complete double shell layer by layer, isolating the physics of each step of the energy transfer process. The measured energy transfer to the foam cushion and the inner shell suggests that our radiation-hydrodynamics simulations capture most of the relevant collision physics. With a 1 MJ laser drive, the experimental data indicate that 22% ± 3% of the ablator kinetic energy couples into inner shell KE, compared to a 27% ± 2% coupling in our xRAGE simulations. Thus, our xRAGE simulations match experimental energy transfer to ∼5%, without inclusion of higher order 2D and 3D effects.