Extraction of tetrachloroaurate or tetrabromoaurate anions has been carried out at acidic pHs (1 and 4) with several ionic liquids bearing halide or bis(trifluoromethanesulfonyl)imide NTf2− anions and cations 1-octyl-3-methylimidazolium, 1-octylpyridinium or 1-methyl-1-octylpyrrolidinium. The removal of gold anionic moieties from water was first studied by mixing aqueous solutions containing gold complexes and water soluble halide (chloride or bromide) ionic liquids. This lead to the formation of either a solid precipitate or a liquid phase corresponding to a hydrophobic ionic liquid based on a tetrahalogenoaurate anion. Values below 10−6 for the solubility products of gold-bearing ionic liquids were obtained. Liquid–liquid extraction of anionic gold complexes with hydrophobic ionic liquids was also carried out. Gold was successfully extracted from water whatever the pH and the ionic liquid used. Distribution coefficients ranged from 3 × 102 to 3 × 104. Investigation on the extraction mechanism revealed an anion exchange between one anionic gold complex and one NTf2− anion.
3 November 2021 in ACS Applied Materials & Interfaces
Composite solid electrolytes including inorganic nanoparticles or nanofibers which improve the performance of polymer electrolytes due to their superior mechanical, ionic conductivity, or lithium transference number are actively being researched for applications in lithium metal batteries. However, inorganic nanoparticles present limitations such as tedious surface functionalization and agglomeration issues and poor homogeneity at high concentrations in polymer matrixes. In this work, we report on polymer nanoparticles with a lithium sulfonamide surface functionality (LiPNP) for application as electrolytes in lithium metal batteries. The particles are prepared by semibatch emulsion polymerization, an easily up-scalable technique. LiPNPs are used to prepare two different families of particle-reinforced solid electrolytes. When mixed with poly(ethylene oxide) and lithium bis(trifluoromethane)sulfonimide (LiTFSI/PEO), the particles invoke a significant stiffening effect (E′ > 106 Pa vs 105 Pa at 80 °C) while the membranes retain high ionic conductivity (σ = 6.6 × 10–4 S cm–1). Preliminary testing in LiFePO4 lithium metal cells showed promising performance of the PEO nanocomposite electrolytes. By mixing the particles with propylene carbonate without any additional salt, we obtain true single-ion conducting gel electrolytes, as the lithium sulfonamide surface functionalities are the only sources of lithium ions in the system. The gel electrolytes are mechanically robust (up to G′ = 106 Pa) and show ionic conductivity up to 10–4 S cm–1. Finally, the PC nanocomposite electrolytes were tested in symmetrical lithium cells. Our findings suggest that all-polymer nanoparticles could represent a new building block material for solid-state lithium metal battery applications.
We have shown that protic ionic liquids, pILs, are effective coagulation solvents for the regenerated of silk fibroin, RSF. We show that the choice of pIL has a dramatic effect on the composition of the RSF. Additionally the use of pILs as the coagulator eliminates the need for volatile organic solvents in silk processing.
Single‐ion conducting polymer electrolytes (SIPE) have attracted a lot of interest for application in high energy density lithium metal batteries. SIPEs possess lithium transport numbers close to unity, which does not provoke concentration gradients and holds the promise of limiting lithium dendrite formation. In this article, we have optimized a single‐ion polymer incorporating the most successful chemical units in polymer electrolytes, such as ethylene oxide, carbonate, and a lithium sulfonimide. This single‐ion poly(ethylene oxide carbonate) copolymer was synthesized by polycondensation between polyethylene glycol, dimethyl carbonate, and a functional diol including the pendant sulfonamide anionic group and the lithium counter‐cation. By playing with the monomer stoichiometry, the crystallinity and ionic conductivity were optimized. The best copolymer showed high ionic conductivity values of 1.2×10−4 S cm−1 at 70 °C. Lithium interactions and mobility were studied by lithium‐pulsed field gradient, lithium diffusion, NMR relaxation time measurements, and FTIR‐ATR analysis. High lithium mobility is observed, which is due to the weakly coordinating chemical environment in the polymer and also that the sulfonamide in the SIPE adopts to a greater extent the cis conformation, which is known to promote lithium mobility. Finally, the performance of the singe‐ion conducting poly(ethylene oxide carbonate) was compared in lithium symmetric cells versus an analogous conventional salt in polymer electrolyte, showing improved performance in lithium plating and stripping.