Development of a novel fluorescence enhancement probe for detection of Sn 2+ in organisms, with high selectivity and sensitivity, is of great interest but remains a great challenge.
The probe TBBA exhibited excellent analytical properties with a remarkably large Stokes shift (195 nm), rapid response, high selectivity and sensitivity, good binding constant (2.37 × 104 M−1) and low LOD (13.10 nM).
A rapid, green and efficient microwave-assisted protocol is developed for the air oxidation of boronic acids to phenols and alcohols under transition metal-free conditions.
Polypyrrole nanowires/graphene (PPyNG) nanocomposites as anticorrosive fillers were prepared by in situ polymerization in order to improve the anticorrosion performance of waterborne epoxy coatings. Field emission scanning electron microscope (FESEM) and Fourier transform infrared spectroscopy (FTIR) characterized the morphologies and structures of the synthesized PPyNG. The polypyrrole nanowires with about 50 nm in diameter were obtained. Conjugation length of PPy was increased with the addition of graphene. Open circuit potential (OCP) measurements, Tafel polarization curves, and electrochemical impedance spectroscopy (EIS) using an electrochemical workstation evaluated the anticorrosion properties of the waterborne epoxy/PPyNG coatings (EPPyNG). The studied nanocomposite coating possessed superior corrosion protection performance when the graphene content of the filler was 2 wt %. Its corrosion rate was about 100 times lower than that of neat epoxy coating. The higher barrier properties of nanocomposite coating and passivation effect of polypyrrole nanowires were beneficial in corrosion protection.