Borophene, a new member of the two-dimensional material family, has been found to support surface plasmon polaritons in visible and infrared regimes, which can be integrated into various optoelectronic and nanophotonic devices. To further explore the potential plasmonic applications of borophene, we propose an infrared plasmonic sensor based on the borophene ribbon array. The nanostructured borophene can support localized surface plasmon resonances, which can sense the local refractive index of the environment via spectral response. By analytical and numerical calculation, we investigate the influences of geometric as well as material parameters on the sensing performance of the proposed sensor in detail. The results show how to tune and optimize the sensitivity and figure of merit of the proposed structure and reveal that the borophene sensor possesses comparable sensing performance with conventional plasmonic sensors. This work provides the route to design a borophene plasmonic sensor with high performance and can be applied in next-generation point-of-care diagnostic devices.
A ring resonator is a basic component of traditional photonic integrated circuits (PIC), which has been, however, found difficult to be applied efficiently in high-compact plasmonic metal-insulator-metal (MIM) systems. Here, based on a plasmonic band-stop filter with a square ring resonator (SRR), a novel side-coupling method is introduced both numerically and theoretically to achieve a drop in the resonant wavelength in the SRR with considerable efficiency. By introducing the reflector structure, the performance can be appreciably improved. Besides, this structure also has potential for sensing and switching. Finally, a dual demultiplexer based on SRRs is realized at telecommunication wavelengths with comparable performance, which makes it possible to apply ring resonators in on-chip plasmonic wavelength division multiplex (WDM) networks. This work is valuable for PIC design, and will promote the on-chip plasmonic system progress.
Mode-division multiplexing (MDM) is a promising solution to improve data transmission capacity for future optical interconnect networks. Mode converters and mode filters play a key role in on-chip MDM systems. Here, we propose and experimentally demonstrate a device, enabling mode conversion and filtering simultaneously, which is composed of asymmetrical directional couplers with subwavelength gratings, in a small footprint of 14.7 µm × 1.42 µm. The device can realize optical mode conversion between the first-order transverse electric (TE) mode and the fundamental TE mode, and can also filter the fundamental TE mode efficiently. The conversion efficiency is over 95%, with a broad 1 dB bandwidth over 80 nm and a high mode extinction ratio of >29 dB. As a mode filter, strong mode elimination of >30 dB is achieved.
As a plasmonic analogue of electromagnetically induced transparency (EIT), plasmon-induced transparency (PIT) has drawn more attention due to its potential of realizing on-chip sensing, slow light and nonlinear effect enhancement. However, the performance of a plasmonic system is always limited by the metal ohmic loss. Here, we numerically report a PIT system with gain materials based on plasmonic metal-insulator-metal waveguide. The corresponding phenomenon can be theoretically analyzed by coupled mode theory (CMT). After filling gain material into a disk cavity, the system intrinsic loss can be compensated by external pump beam, and the PIT can be greatly fueled to achieve a dramatic enhancement of slow light performance. Finally, a double-channel enhanced slow light is introduced by adding a second gain disk cavity. This work paves way for a potential new high-performance slow light device, which can have significant applications for high-compact plasmonic circuits and optical communication.
Polarization dependence in integrated silicon photonics has a detrimental effect on the manipulation of quantum state with different polarizations in the quantum technology. Those limits have profound implications for further technological developments, especially in quantum photonic internet. Here, we propose a polarization-independent Mach–Zehnder interferometer (MZI) structure based on a 340 nm-thick silicon-on-insulator (SOI) platform. The MZI facilitates low loss, broad operating bandwidth, and large tolerance of the fabrication imperfection. We achieve an excess loss of 18 in the 100 nm bandwidth (1500∼1600 nm) for both transverse electric (TE) and transverse magnetic (TM) modes. We numerically demonstrate an interference visibility of 99% and a polarization-independent loss (PDL) of 0.03 for both polarizations at 1550 nm. Furthermore, by using the principle of phase compensation and self-image, we shorten the length of the waveguide taper by almost an order of magnitude with the transmission of >95% for both TE and TM polarizations. Up to now, the proposed structure could significantly improve the integration and promote the development of monolithic integrated quantum internet.