Nearshore morphology is a key driver in wave breaking and the resulting nearshore circulation, recreational safety, and nutrient dispersion. Morphology persists within the nearshore in specific shapes that can be classified into equilibrium states. Equilibrium states convey qualitative information about bathymetry and relevant physical processes. While nearshore bathymetry is a challenge to collect, much information about the underlying bathymetry can be gained from remote sensing of the surfzone. This study presents a new method to automatically classify beach state from Argus daytimexposure imagery using a machine learning technique called convolutional neural networks (CNNs). The CNN processed imagery from two locations: Narrabeen, New South Wales, Australia and Duck, North Carolina, USA. Three different CNN models are examined, one trained at Narrabeen, one at Duck, and one trained at both locations. Each model was tested at the location where it was trained in a self-test, and the single-beach models were tested at the location where it was not trained in a transfer-test. For the self-tests, skill (as measured by the F-score) was comparable to expert agreement (CNN F-values at Duck = 0.80 and Narrabeen = 0.59). For the transfer-tests, the CNN model skill was reduced by 24–48%, suggesting the algorithm requires additional local data to improve transferability performance. Transferability tests showed that comparable F-scores (within 10%) to the self-trained cases can be achieved at both locations when at least 25% of the training data is from each site. This suggests that if applied to additional locations, a CNN model trained at one location may be skillful at new sites with limited new imagery data needed. Finally, a CNN visualization technique (Guided-Grad-CAM) confirmed that the CNN determined classifications using image regions (e.g., incised rip channels, terraces) that were consistent with beach state labelling rules.
Resolving surf-zone bathymetry from high-resolution imagery typically involves measuring wave speeds and performing a physics-based inversion process using linear wave theory, or data assimilation techniques which combine multiple remotely sensed parameters with numerical models. In this work, we explored what types of coastal imagery can be best utilized in a 2-dimensional fully convolutional neural network to directly estimate nearshore bathymetry from optical expressions of wave kinematics. Specifically, we explored utilizing time-averaged images (timex) of the surf-zone, which can be used as a proxy for wave dissipation, as well as including a single-frame image input, which has visible patterns of wave refraction and instantaneous expressions of wave breaking. Our results show both types of imagery can be used to estimate nearshore bathymetry. However, the single-frame imagery provides more complete information across the domain, decreasing the error over the test set by approximately 10% relative to using timex imagery alone. A network incorporating both inputs had the best performance, with an overall root-mean-squared-error of 0.39 m. Activation maps demonstrate the additional information provided by the single-frame imagery in non-breaking wave areas which aid in prediction. Uncertainty in model predictions is explored through three techniques (Monte Carlo (MC) dropout, infer-transformation, and infer-noise) to provide additional actionable information about the spatial reliability of each bathymetric prediction.
Bathymetry, i.e., depth, imaging in a river is of crucial importance for shipping operations and flood management. With advancements in sensor technology and plentiful computational resources, various types of indirect measurements can be used to estimate high‐resolution river bed topography. In this work, we image river bed topography using depth‐averaged quasi‐steady velocity observations related to the topography through the 2D shallow water equations. The principal component geostatistical approach (PCGA), a fast and scalable variational inverse modeling method powered by low‐rank representation of covariance matrix structure, is presented and applied to two riverine bathymetry identification problems. To compare the efficiency and effectiveness of the proposed method, an ensemble‐based approach is also applied to the test problems. It is demonstrated that PCGA is superior to the ensemble‐based approach in terms of computational effort and accuracy because of the successive linearization of the forward model and the optimal low‐rank representation of the prior covariance matrix. To investigate how different low‐rank covariance matrix representation by the two approaches can affect the solution accuracy, we analyze the direct survey data of the river bottom topography in the test problem and show that PCGA utilizes more efficient and parsimonious choice of the solution basis than the ensemble‐based approach. Geostatistical analysis performed on the direct survey data also confirms the validity of the chosen covariance model and its structural parameters.
23 February 2021 in Stochastic Environmental Research and Risk Assessment
Timely observations of nearshore water depths are important for a variety of coastal research and management topics, yet this information is expensive to collect using in situ survey methods. Remote methods to estimate bathymetry from imagery include using either ratios of multi-spectral reflectance bands or inversions from wave processes. Multi-spectral methods work best in waters with low turbidity, and wave-speed-based methods work best when wave breaking is minimal. In this work, we build on the wave-based inversion approaches, by exploring the use of a fully convolutional neural network (FCNN) to infer nearshore bathymetry from imagery of the sea surface and local wave statistics. We apply transfer learning to adapt a CNN originally trained on synthetic imagery generated from a Boussinesq numerical wave model to utilize tower-based imagery collected in Duck, North Carolina, at the U.S. Army Engineer Research and Development Center’s Field Research Facility. We train the model on sea-surface imagery, wave conditions, and associated surveyed bathymetry using three years of observations, including times with significant wave breaking in the surf zone. This is the first time, to the authors’ knowledge, an FCNN has been successfully applied to infer bathymetry from surf-zone sea-surface imagery. Model results from a separate one-year test period generally show good agreement with survey-derived bathymetry (0.37 m root-mean-squared error, with a max depth of 6.7 m) under diverse wave conditions with wave heights up to 3.5 m. Bathymetry results quantify nearshore bathymetric evolution including bar migration and transitions between single- and double-barred morphologies. We observe that bathymetry estimates are most accurate when time-averaged input images feature visible wave breaking and/or individual images display wave crests. An investigation of activation maps, which show neuron activity on a layer-by-layer basis, suggests that the model is responsive to visible coherent wave structures in the input images.
Lake St. Clair is a shallow water body located between Lake Huron and Lake Erie in the Great Lakes complex with coastline in both US and Canada. The numerical modeling of waves and water levels was performed to capture storm conditions along the US coastline. The methodology presented in Jensen et al. (2012) for Lake Michigan was followed for the majority of the project. The NOAA/NCEP Climate Forecast System Reanalysis wind fields were adjusted for marine exposure wind speeds. The WAM wave model was validated and applied for production of all wind generated wave results, including ice when applicable. The ADCIRC model was forced with wind fields, flow rates at the St. Clair River boundary, and water levels at the Detroit River boundary and validated to water levels at St. Clair Shores and Windmill Point. The ADCIRC model was tightly coupled with four near-shore Full-Plane STWAVE model grids using CSTORM-MS. The results show good agreement between all validation data sets, and low errors in the production storms with which data was available. In total, 145 storm events were run with the full numerical system to quantify the water level response to extreme events In Lake St. Clair.