By optimizing the efficiency of a modular simulation model of the PV module structure by genetic algorithm, under several weather conditions, as a portion of recognizing the ideal plan of a Near Zero Energy Household (NZEH), an ideal life cycle cost can be performed. The optimum design from combinations of NZEH-variable designs, are construction positioning, window-to-wall proportion, and glazing categories, which will help maximize the energy created by photovoltaic panels. Comprehensive simulation technique and modeling are utilized in the solar module I-V and for P-V output power. Both of them are constructed on the famous five-parameter model. In addition, the efficiency of the PV panel is established by the genetic algorithm under the standard test conditions (STC) and a comparison between the theoretical and experimental results is done to achieve maximum performance ranging from 0.15 to 0.16, particularly with an error of about - 0.333 for an experimental power of 30 Watts compared with the theoretical power of 30.1 Watts. The results obtained by the genetic algorithm give the best value for efficiency at the range of 16% to 17% of solar radiation, from 500–600 W/m2. These values are almost identical to the efficiency obtained from the results of the operation, where the best value for efficiency in the experimental results was seen to be 15.7%.
14 March 2024 in International Journal of Renewable Energy Development
The need for renewable energy sources is higher than ever due to rising global warming, climate change, and ozone depletion. For refrigeration and air conditioning applications, adsorption refrigeration systems are viable alternatives cooling techniques. This study is a topic and part of the M.Sc. thesis. A field solar-powered ice maker unit was created, studied, tested, and evaluated on the 13th and 30th of May, 2022. Activated carbon and methanol pair was used to set up a refrigeration system in Baghdad (Al Dora). Experimental tests were carried out outdoors to determine the coefficient of performance COP and specific cooling power SCP of the system. The results showed that the lowest temperature obtained at the evaporative surface was (4 oC) and (3 oC) for the 13th and 30th of May, respectively, at the opening time of the valve between the evaporator and the generator at 9 pm. In addition, the amounts of methanol condensate were (0.340 kg) and (0.344 kg) for the 13th and 30th of May, respectively, while the maximum cycle coefficient of performance (COP) and specific cooling power SCP are about 0.57 and 0.14 kW/kga.c , respectively
18 May 2018 in International journal of simulation: systems, science & technology
The optimum performance of the continuous Solar Adsorption Refrigeration System unit with Genetic Algorithms (GA) is performed. The adsorption bed (generator) is the heart of the system and it has the greatest effect on the performance of the system. A good design of the generator leads to smooth operation and better results, so more attention must be paid towards the design influence on the performance of the system, with respect to many factors that have an effect on the performance of adsorptive solar ice maker unit. These factors contain Geometrical factors, Concentration factor Operating factors and Climatic factors. Which play an essential role on the designed, constructed, tests and optimized the solar adsorption refrigeration system in order to confirm and achieve the possibility of the principles of solar adsorption refrigeration system and assess the amount of methanol percentage to the amount of activated carbon (A.C). A field solar powered of ice maker unit designed, analyzed, built and tested, this unit was tested during three months from May till August 2012. The maximum (COP) of the solar adsorption system was 0.49 by ordinary calculation and 0.4883 by Genetic Optimization so there is compatible agreement between the classical method and Genetic Optimization. The concentration ratio X0 kg Methanol/kg (A.C) of the present solar adsorption system was 0.29 as a result of the experimental work and 0.286 by genetic optimization. The maximum mass desorbed is approximately 600 g / 3 kg (A.C) which is a good quality for forming 1 kg of ice, when the average solar radiation in Iraq was 900 W/m2.