The objective of this research was to investigate the behavior and conditions for CO2 adsorption using a mixture of CO2/N2 over a fixed-bed column of zeolite 5A. The study was performed with a variation in gas composition of CO2/N2 as a 20/80, 50/50, and 80/20 volume %, the adsorption temperatures as 298, 333, and 373 K and the total feed flow rates as 1, 2, and 4 L/h under 100 kPa pressure. The Bohart–Adams, Yoon–Nelson, and Thomas models were used to predict the breakthrough behavior of CO2 adsorption in a fixed column. Furthermore, the adsorption mechanism has been investigated using the kinetics adsorption of pseudo-first-order, pseudo-second-order, Boyd model, and intraparticle model. Increasing the CO2 composition of a gas mixture resulted in a high CO2 adsorption capacity because of the high partial pressure of CO2. The capacity of CO2 adsorption was decreased with increasing temperature because of physical adsorption with an exothermic reaction. The CO2 adsorption capacity was also decreased with increasing feed flow rates with inadequate time for CO2 adsorbates diffusion into the pores of the adsorbent before exiting the packed bed. The CO2 adsorption by zeolite 5A confirmed that the physical adsorption with intraparticle diffusion was the rate-controlling step of the whole process.
The objectives of the research were to develop synthesis and estimation of each factor on carbon dioxide adsorption of advanced functional zeolite NaY material derived from bagasse ash and rice husk ash with different crystallization temperatures and weight percentages of zinc by the ion exchange method. The adsorbents were tested in a packed bed reactor at different temperatures and flow rates of carbon dioxide. The Minitab program was used to estimate the effects of each factor on carbon dioxide adsorption properties. The results showed that extracted silicon dioxide from bagasse ash and rice husk ash could be successfully used as raw material for zeolite NaY synthesis with a crystallization temperature of 298.15 K. The zeolite NaY crystalline structure was well-preserved after ion exchange. The highest capacity of carbon dioxide adsorption was at 10.33 mmol/g with zeolite 5B298-373-1. The results of the Minitab program showed that the carbon dioxide adsorption decreased with increasing crystallization temperature and carbon dioxide flow rate parameters. However, the increased weight percentage of zinc loading on zeolite NaY resulted in better carbon dioxide adsorption. The factors of the types of adsorbents and adsorption temperature showed interaction with each other.
The simulation of carbon dioxide (CO2)-methane (CH4) mixed gas adsorption and the selectivity on zeolite 4A using Aspen Adsorption were studied. The influence of temperature ranging from 273 to 343 K, pressure up to 10 bar and various compositions of CO2 in the binary system were simulated. The findings of the study demonstrate that the models are accurate. In addition, the effects of various key parameters such as temperature, pressure, and various compositions of binary gases were investigated. The highest CO2 and CH4 adsorption are found at 273 K and 10 bar in the Langmuir isotherm model with 5.86 and 2.88 mmol/g, respectively. The amount of CO2 adsorbed and the selectivity of the binary mixture gas depends on the composition of CO2. The kinetics of adsorption for pure components of CO2 at high temperatures can reach saturation faster than CH4. The influence of the physical properties of zeolite 4A on kinetic adsorption were also studied, and it was observed that small adsorbent particles, large pore diameter, and large pore volume would enter saturation quickly. The prediction of CO2-CH4 mixed gas adsorption and selectivity on zeolite 4A were developed for further use for commercial gas separation.
28 February 2022 in Materials Chemistry and Physics
SUZ-4 zeolites were synthesized by hydrothermal technique under autogenous pressure with SiO2:Al2O3 ratio of 21.22 using silica-sol and tetraethlyammonium hydroxide as a silica source and a template, respectively. Effect of temperature with 150, 165, and 180°C and crystallization time with 24, 18, and 12h were studied to obtain the suitable conditions at crystallization. SUZ-4 zeolite synthesis using short time compared to the conventional method was successful synthesized. The synthesized SUZ-4 zeolites were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), BET-N2 adsorption, and X-ray fluorescence (XRF). The results show that SUZ-4 zeolite was obtained from rapid crystallization having a narrow pore size distribution and needle-shaped crystals. Highly crystallined SUZ-4 depended on enhanced temperature and time of crystallization conditions
1 January 2016 in International Journal of Environmental Science and Development