As one of the most important prosthetic implants for amputees, current commercially available prosthetic hands are still too bulky, heavy, expensive, complex and inefficient. Here, we present a study that utilizes the artificial tendon to drive the motion of fingers in a biomimetic prosthetic hand. The artificial tendon is realized by combining liquid crystal elastomer (LCE) and liquid metal (LM) heating element. A joule heating-induced temperature increase in the LCE tendon leads to linear contraction, which drives the fingers of the biomimetic prosthetic hand to bend in a way similar to the human hand. The responses of the LCE tendon to joule heating, including temperature increase, contraction strain and contraction stress, are characterized. The strategies of achieving a constant contraction stress in an LCE tendon and accelerating the cooling for faster actuation are also explored. This biomimetic prosthetic hand is demonstrated to be able to perform complex tasks including making different hand gestures, holding objects of different sizes and shapes, and carrying weights. The results can find applications in not only prosthetics, but also robots and soft machines.
The existing continuous caster layout curves cause plastic deformation of slabs during bending and straightening segments, while no effective deformation occurs in the basic arc segment, which tends to induce defects, such as cracks, and compromise slab quality. High-temperature creep deformation is generally regarded as detrimental to material performance. If the significant and inevitable creep deformation of a slab could be utilized to accomplish bending and straightening deformation during continuous casting, it would turn a potential harm into an advantage, ultimately enhancing both production efficiency and final product quality. Therefore, a new continuous bending and straightening curve based on the high-temperature creep property of a low-alloy steel slab was designed. The new curve cancelled the original basic arc segment and smoothly connected the bending and straightening segments, which not only substantially prolonged the effective bending and straightening deformation time but also extended the creep time. The locations within the slab corresponding to the temperature range of 1100 °C to 1200 °C were obtained from the simulated temperature field results. Comparing the calculated strain rates with the steady-state creep rates revealed that within the temperature range exhibiting favorable hot ductility, the bending and straightening deformation of the slab could be accomplished entirely through creep deformation.