Piecewise constant curvature models have proven to be an useful tool for describing kinematics and dynamics of soft robots. However, in their three dimensional formulation they suffer from many issues limiting their range of applicability - as discontinuities and singularities - mainly concerning the straight configuration of the robot. In this work we analyze these flaws, and we show that they are not due to the piecewise constant curvature assumption itself, but that instead they are a byproduct of the commonly employed direction/angle of bending parametrization of the state. We therefore consider an alternative state representation which solves all the discussed issues, and we derive a model based controller based on it. Examples in simulation are provided to support and describe the theoretical results. When using the novel parametrization, the system is able to perform more complex tasks, with a strongly reduced computational burden, and without incurring in spikes and discontinuous behaviors.

In recent years, a clear trend toward simplification emerged in the development of robotic hands. The use of soft robotic approaches has been a useful tool in this prospective, enabling complexity reduction by embodying part of grasping intelligence in the hand mechanical structure. Several hand prototypes designed according to such principles have accomplished good results in terms of grasping simplicity, robustness, and reliability. Among them, the Pisa/IIT SoftHand demonstrated the feasibility of a large variety of grasping tasks, by means of only one actuator and an opportunely designed tendon-driven differential mechanism. However, the use of a single degree of actuation prevents the execution of more complex tasks, like fine preshaping of fingers and in-hand manipulation. While possible in theory, simply doubling the Pisa/IIT SoftHand actuation system has several disadvantages, e.g., in terms of space and mechanical complexity. To overcome these limitations, we propose a novel design framework for tendon-driven mechanisms, in which the main idea is to turn transmission friction from a disturbance into a design tool. In this way, the degrees of actuation (DoAs) can be doubled with little additional complexity. By leveraging on this idea, we design a novel robotic hand, the Pisa/IIT SoftHand 2. We present here its design, modeling, control, and experimental validation. The hand demonstrates that by opportunely combining only two DoAs with hand softness, a large variety of grasping and manipulation tasks can be performed, only relying on the intelligence embodied in the mechanism. Examples include rotating objects with different shapes, opening a jar, and pouring coffee from a glass.

We report on recent work in modelling the process of grasping and active touch by natural and artificial hands. Starting from observations made in human hands about the correlation of degrees of freedom in patterns of more frequent use (postural synergies), we consider the implications of a geometrical model accounting for such data, which is applicable to the pre-grasping phase occurring when shaping the hand before actual contact with the grasped object. To extend applicability of the synergy model to study force distribution in the actual grasp, we introduce a modified model including the mechanical compliance of the hand's musculotendinous system. Numerical results obtained by this model indicate that the same principal synergies observed from pre-grasp postural data are also fundamental in achieving proper grasp force distribution. To illustrate the concept of synergies in the dual domain of haptic sensing, we provide a review of models of how the complexity and heterogeneity of sensory information from touch can be harnessed in simplified, tractable abstractions. These abstractions are amenable to fast processing to enable quick reflexes as well as elaboration of high-level percepts. Applications of the synergy model to the design and control of artificial hands and tactile sensors are illustrated.

In this paper, two upper limbs of an exoskeleton robot are operated within a constrained region of the operational space with unidentified intention of the human operator’s motion as well as uncertain dynamics including physical limits. The new human-cooperative strategies are developed to detect the human subject’s movement efforts in order to make the robot behavior flexible and adaptive. The motion intention extracted from the measurement of the subject’s muscular effort in terms of the applied forces/torques can be represented to derive the reference trajectory of his/her limb using a viable impedance model. Then, adaptive online estimation for impedance parameters is employed to deal with the nonlinear and variable stiffness property of the limb model. In order for the robot to follow a specific impedance target, we integrate the motion intention estimation into a barrier Lyapunov function based adaptive impedance control. Experiments have been carried out to verify the effectiveness of the proposed dual-arm coordination control scheme, in terms of desired motion and force tracking.

Soft robots (SRs) represent one of the most significant recent evolutions in robotics. Designed to embody safe and natural behaviors, they rely on compliant physical structures purposefully designed to embody desirable and sometimes variable impedance characteristics. This article discusses the problem of controlling SRs. We start by observing that most of the standard methods of robotic control-e.g., high-gain robust control, feedback linearization, backstepping, and active impedance control-effectively fight against or even completely cancel the physical dynamics of the system, replacing them with a desired model. This defeats the purpose of introducing physical compliance. After all, what is the point of building soft actuators if we then make them stiff by control?