At the École Polytechnique « LULI » facility, we have measured the impulse coupling coefficient Cm (target momentum per joule of incident laser light) with several target materials in vacuum, at 1057 nm and 400 fs and 80 ps pulse duration. A total of 64 laser shots were completed in a two-week experimental campaign, divided between the two pulse durations and among the materials. Our main purpose was to resolve wide discrepancies among reported values for Cm in the 100 ps region, where many applications exist. A secondary purpose was to compare Cm at 400 fs and 80 ps pulse duration. The 80 ps pulse was obtained by partial compression. Materials were Al, Ta, W, Au, and POM (polyoxymethylene, trade name Delrin). One application of these results is to pulsed laser ablation propulsion in space, including space debris re-entry, where narrow ranges in Cm and specific impulse Isp spell the difference between dramatic and uneconomical performance. We had difficulty measuring mass loss from single shots. Imparted momentum in single laser shots was determined using pendulum deflection and photonic Doppler velocimetry. Cm was smaller at the 400 fs pulse duration than at 80 ps. To our surprise, Cm for Al at 80 ps was at most 30 N/MW with 30 kJ/m2 incident fluence. On the other extreme, polyoxymethylene (POM, trade name Delrin) demonstrated 770 N/MW under these conditions. Together, these results offer the possibility of designing a Cm value suited to an application, by mixing the materials appropriately.
We derive optimum values of parameters for laser-driven flights into low Earth orbit (LEO) using an Earth-based laser, as well as sensitivity to variations from the optima. These parameters are the ablation plasma exhaust velocity vE and specific ablation energy Q*, plus related quantities such as momentum coupling coefficient Cm and the pulsed or continuous laser intensity that must be delivered to the ablator to produce these values. Different optima are found depending upon whether it is desired to maximize mass m delivered to LEO, maximize the ratio m/M of orbit to ground mass, or minimize cost in energy per gram delivered. Although it is not within the scope of this report to provide an engineered flyer design, a notional, cone-shaped flyer is described to provide a substrate for the discussion and flight simulations. The flyer design emphasizes conceptually and physically separate functions of light collection at a distance from the laser source, light concentration on the ablator, and autonomous steering. Approximately ideal flight paths to LEO are illustrated beginning from an elevated platform. We believe LEO launch costs can be reduced 100-fold in this way. Sounding rocket cases, where the only goal is to momentarily reach a certain altitude starting from near sea level, are also discussed. Nonlinear optical constraints on laser propagation through the atmosphere to the flyer are briefly considered.
1 December 2001 in Journal of Photochemistry and Photobiology A: Chemistry