The objectives of this study were to characterize the effects of operational factors on spray application parameters for remotely piloted aerial application systems (RPAAS). The effects of application height and ground speed on spray pattern uniformity and droplet spectra characteristics were investigated for two RPAAS (DJI model MG-1 and HSE V6A) delivery vehicles equipped with original equipment manufacturer (OEM) nozzles. A spray mixture of tap water and fluorescent dye was applied at three different application heights in conjunction with four different ground speeds over the center line of a cotton string, suspended 1 m above ground. Fluorometric assessment of spray deposits on cotton strings and spray droplets captured on water-sensitive paper samplers described spray pattern and droplet spectra, respectively. Effective swath was determined based on the widest spray swath with a coefficient of variation (CV) ≤ 25%. Regardless of ground speed, application heights of 2 and 3 m yielded the largest effective swath for the MG-1. Neither application height nor ground speed significantly influenced effective swath for the V6A. These test results may provide guidance to remote aerial applicators as to the best application height and ground speed to use for their RPAAS for efficacious application of pest control products.
This study was designed to determine whether a remotely piloted aerial application system (RPAAS) could be used in lieu of a backpack sprayer for post-emergence herbicide application. Consequent to this objective, a spray mixture of tap water and fluorescent dye was applied on Palmer amaranth and ivyleaf morningglory using an RPAAS at 18.7 and 37.4 L·ha−1 and a CO2-pressurized backpack sprayer at a 140 L·ha−1 spray application rate. Spray efficiency (the proportion of applied spray collected on an artificial sampler) for the RPAAS treatments was comparable to that for the backpack sprayer. Fluorescent spray droplet density was significantly higher on the adaxial surface for the backpack sprayer treatment than that for the RPAAS platforms. The percent of spray droplets on the abaxial surface for the RPAAS aircraft at 37.4 L·ha−1 was 4-fold greater than that for the backpack sprayer at 140 L·ha−1. The increased spray deposition on the abaxial leaf surfaces was likely caused by rotor downwash and wind turbulence generated by the RPAAS which caused leaf fluttering. This improved spray deposition may help increase the efficacy of contact herbicides. Test results indicated that RPAASs may be used for herbicide application in lieu of conventional backpack sprayers.
The phenomenal growth of remotely piloted aerial application systems (RPAASs) in recent years has raised questions about their impact on the off-target movement of plant protection products. The spray droplet spectrum is one of the important determining factors that govern droplet trajectories and off-target movement of pesticide particles. A field study was conducted to compare in-swath and downwind spray deposition on ground samplers from a 20 L RPAAS platform, equipped with three different nozzles, which provided fine, medium, and extra-coarse droplet spectra. A fluorescent dye was used as a tracer to determine spray deposition. Airborne spray droplets were measured at 10 and 20 m downwind. Downwind deposition measured on ground samplers showed that the extra-coarse nozzle received significantly fewer deposits than the medium or the fine nozzle. Similarly, the airborne deposition for the extra-coarse nozzle was significantly less compared to either the fine or the medium nozzle. Linear mixed effects modeling confirmed these results and showed that wind speed served as a covariate by refining the deposition differences among nozzles. Results indicated that spray drift from RPAAS platforms may be mitigated by using appropriate nozzles that produce larger droplet spectra. These results will provide aerial applicators with a better understanding of the best management practices to mitigate drift.
1 April 2003 in Journal of Sustainable Agriculture
The potential of corn earworm moths Helicoverpa zea, an important pest of sorghum in Texas, as a passive vector of sorghum ergot, Claviceps africana was assessed. Laboratory-reared (females and males) and field-moths trapped in sex pheromone traps were confined in screen cages with potted male-sterile sorghum line AT×623 that had been artificially infected with sorghum ergot and was producing massive amounts of honeydew that contained spores of the fungus. In the cages, moths were observed feeding on the honeydew. When laboratory-reared moths contaminated with C. africana spores were released for 12 or 48 h in cages containing healthy greenhouse- or field-grown male-sterile sorghum plants at anthesis, the levels of ergot severities on the panicles ranged from 0.5–90%, per panicle. The levels of ergot infection on greenhouse- and field-grown AT×623 exposed to ergot contaminated field-trapped males for 48 h ranged from 0–81.7%. Mean external contamination of laboratory-reared and field-trapped moths placed in a soapy wash was 1.4 × 105 and 4.7 ×104 conidia/ml, respectively. This study demonstrated that contaminated adult corn earworm could transmit the sorghum ergot from diseased to healthy panicles when environmental conditions are favorable for infection. Thus, migrating moths and other highly mobile pest species have the potential to transport C. africana over relatively large distances.
12 April 2015 in Experimental and Applied Acarology
Production agriculture has recently witnessed exponential growth in the use of UAS technology to obtain site-specific, real-time spectral reflectance data for the management of spatial and temporal variability in agricultural ecosystems. The integration of this novel technology and remotely piloted aerial application systems (RPAASs) for pest management requires data curation on spray pattern uniformity, droplet distribution and the operational factors governing such data. The effects of application height and ground speed on spray pattern uniformity and droplet spectra characteristics for four commercially available RPAAS platforms configured with four different payload capacities (5, 10, 15 and 20 L) and factory-supplied nozzles were investigated. Spray pattern was determined by a cotton string deposition analysis system. Spray droplets captured on water-sensitive paper cards were analyzed using a computer-based scanner system. The test results indicated that each RPAAS platform of varying payload capacity was able to produce an acceptable spray pattern. As the payload capacity increased, so did the effective swath. However, the effective swath was comparable between 15 and 20 L units. The theoretical spray application rate decreased with ground speed. The fundamental data reported here may provide guidance to aerial applicators and help in the furtherance of RPAASs as an effective pest management tool.