Random fiber laser, as a kind of novel fiber laser that utilizes random distributed feedback as well as Raman gain, has become a research focus owing to its advantages of wavelength flexibility, modeless property and output stability. Herein, a tunable optical parametric oscillator (OPO) enabled by a random fiber laser is reported for the first time. By exploiting a tunable random fiber laser to pump the OPO, the central wavelength of idler light can be continuously tuned from 3977.34 to 4059.65 nm with stable temporal average output power. The maximal output power achieved is 2.07 W. So far as we know, this is the first demonstration of a continuous-wave tunable OPO pumped by a tunable random fiber laser, which could not only provide a new approach for achieving tunable mid-infrared (MIR) emission, but also extend the application scenarios of random fiber lasers.

We studied the transverse mode instability (TMI) characteristics of few-mode fiber laser amplifier employing ytterbium-doped fiber (YDF) with core/cladding diameter of 30/400 μm under different bending diameters. The gain fiber is coiled in ellipse shape with minimum bending diameter changed from 9 cm, 10 cm, 11 cm to 12 cm in the bending part, and the experimental results show an anomaly characteristic of TMI. The TMI threshold improved from 772 W, 1149 W and 1458 W to 1641 W when the bending diameter of YDF increase from 9 cm, 10 cm, 11 cm to 12 cm, accompanied by the deterioration of beam quality from 1.60, 1.67, 1.87 to 1.95. This is mainly because tightly bending in few-mode fiber will promote the overlap between modes and lead to mode coupling, which may trigger TMI. Besides, the bending losses of HOMs decrease while bending diameter increasing, so that there is higher output efficiency and deteriorated beam quality when bending diameter increase. Although the phenomenon is not agreed with common TMI with near single-mode fiber laser, the result will be helpful for the design and power scaling of few-mode fiber lasers.

Thanks to the advantage of balancing nonlinear effects and transverse mode instability, vary core diameter active fiber (VCAF) has been widely used in high power ytterbium-doped fiber lasers in recent years. Up to now, VCAF has developed from the basic form of the original tapered fiber to the spindle-shaped and saddle-shaped fiber with different characteristics and has been applied in conventional fiber lasers, oscillating–amplifying integrated fiber lasers, and quasi-continuous wave fiber lasers and successfully improved the performance of these lasers. In the present study, a 6110 W fiber laser amplifier is realized based on a tapered fiber. The maximum output power of a fiber laser amplifier based on spindle-shaped fibers is 6020 W with a beam quality of M²~1.86. In this paper, we first introduce the basic concept of VCAF and summarize its main fabrication methods and advantages in high-power fiber laser applications. Then, we will present the recent research results of high-power fiber laser employing VCAF in our group and clarify the outstanding advantages of VCAF compared with the constant core diameter active fiber (CCAF).

The main factors limiting the power scaling of high-peak-power high-brightness quasi-continuous wave (QCW) fiber laser oscillator and a possible solution are analyzed in this paper. The impacts of fiber length and grating parameters on the output power are studied by rate equations. Under the optimized parameters, a high-brightness QCW fiber laser oscillator with a peak power of 7.3 kW is presented experimentally by using a 24 meter long spindle-shaped Yb-doped fiber with a constant core cladding ratio, and that is the best performance of peak power and brightness in near-single-mode QCW fiber lasers at present to the best of our knowledge. The corresponding pulse energy is 0.57 J and the beam quality M² factor is about 1.43 under the condition of repetition frequency of 1 kHz and pulse width of 100 μs. The details are analyzed, and also the limiting factors of further power scaling, strategies of suppressing nonlinear effects and the principle of optical device parameter optimization.

We present an investigation of the effect of pumping wavelength on the threshold of transverse mode instability (TMI) in high-power ytterbium-doped fiber laser. By using a fiber laser amplifier with a bi-directional pumping structure, we obtain the TMI thresholds under wavelength-stabilized and non-wavelength-stabilized 976 nm laser diodes (LDs) pumping scheme. The results show that the non-wavelength-stabilized LD pump has a higher TMI threshold compared to the wavelength-stabilized LD pump. By optimizing the operating current of the non-wavelength-stabilized 976nm LD, a ~4kW output laser with near single-mode beam quality (M2~1.3) is achieved, with a slope efficiency of ~84.4%. The analysis yields that when the pumping wavelength deviates from the 976 nm peak, the TMI threshold can be increased. This reveals that optimizing pump source wavelength has great potential for suppressing TMI effect in the power scaling of fiber lasers.

Tapered Yb-doped fiber (T-YDF) can balance the suppression of transverse mode instability (TMI) and stimulated Raman scattering (SRS) in high power fiber lasers. In this work, we have constructed an all-fiberized master oscillator power amplifier emitting at the central wavelength of 1050 nm based on a T-YDF and investigated the laser performance in respective co-pumped and counter-pumped configurations. The results show that the T-YDF can effectively mitigate SRS effect in short-wavelength fiber lasers. A nearly single mode beam quality (M2∼1.20) is obtained at output power of 3 kW-level. In particular, the SRS suppression ratio in the co-pump and counter-pump scheme is about ∼33.2 dB at ∼3039 W and ∼46.6 dB at ∼2818 W, respectively. By further optimizing the structure of the tapered active fiber, it is promising to further improve the output power and beam quality in short-wavelength fiber lasers.