Hemostasis plays an essential role in all surgical procedures. Uncontrolled hemorrhage is the primary cause of death during surgeries, and effective blood loss control can significantly reduce mortality. For modern surgeons to select the right agent at the right time, they must understand the mechanisms of action, the effectiveness, and the possible adverse effects of each agent. Over the past decade, various hemostatic agents have grown intensely. These agents vary from absorbable topical hemostats, including collagen, gelatins, microfibrillar, and regenerated oxidized cellulose, to biologically active topical hemostats such as thrombin, biological adhesives, and other combined agents. Commercially available products have since expanded to include topical hemostats, surgical sealants, and adhesives. Silk is a natural protein consisting of fibroin and sericin. Silk fibroin (SF), derived from silkworm Bombyx mori, is a fibrous protein that has been used mostly in fashion textiles and surgical sutures. Additionally, SF has been widely applied as a potential biomaterial in several biomedical and biotechnological fields. Furthermore, SF has been employed as a hemostatic agent in several studies. In this review, we summarize the several morphologic forms of SF and the latest technological advances on the use of SF-based hemostatic agents.

Among various bioreactors used in the field of tissue engineering and regenerative medicine, a magnetic bioreactor is more capable of providing steady force to the cells while avoiding direct manipulation of the materials. However, most of them are complex and difficult to fabricate, with drawbacks in terms of consistency and biocompatibility. In this study, a magnetic bioreactor system and a magnetic hydrogel were manufactured by single-stage three-dimensional (3D) printing with digital light processing (DLP) technique for differentiation of myoblast cells. The hydrogel was composed of a magnetic part containing iron oxide and glycidyl-methacrylated silk fibroin, and a cellular part printed by adding mouse myoblast cell (C2C12) to gelatin glycidyl methacrylate, that was placed in the magnetic bioreactor system to stimulate the cells in the hydrogel. The composite hydrogel was steadily printed by a one-stage layering technique using a DLP printer. The magnetic bioreactor offered mechanical stretching of the cells in the hydrogel in 3D ways, so that the cellular differentiation could be executed in three dimensions just like the human environment. Cell viability, as well as gene expression using quantitative reverse transcription-polymerase chain reaction, were assessed after magneto-mechanical stimulation of the myoblast cell-embedded hydrogel in the magnetic bioreactor system. Comparison with the control group revealed that the magnetic bioreactor system accelerated differentiation of mouse myoblast cells in the hydrogel and increased myotube diameter and length in vitro . The DLP-printed magnetic bioreactor and the hydrogel were simply manufactured and easy-to-use, providing an efficient environment for applying noninvasive mechanical force via FDA-approved silk fibroin and iron oxide biocomposite hydrogel, to stimulate cells without any evidence of cytotoxicity, demonstrating the potential for application in muscle tissue engineering.

Hydrogel with chemical modification has been used for 3D printing in the biomedical field of cell and tissue-based regeneration because it provides a good cellular microenvironment and mechanical supportive ability. As a scaffold and a matrix, hydrogel itself has to be modified chemically and physically to form a β-sheet crosslinking structure for the strength of the biomaterials. These chemical modifications could affect the biological damage done to encapsulated cells or surrounding tissues due to unreacted chemical residues. Biological assessment, including assessment of the cytocompatibility of hydrogel in clinical trials, must involve testing with cytotoxicity, irritation, and sensitization. Here, we modified silk fibroin and glycidyl methacrylate (Silk-GMA) and evaluated the physical characterizations, residual chemical detection, and the biological effect of residual GMA depending on dialysis periods. Silk-GMA depending on each dialysis period had a typical β-sheet structure in the characterization analysis and residual GMA decreased from dialysis day 1. Moreover, cell proliferation and viability rate gradually increased; additionally, necrotic and apoptotic cells decreased from dialysis day 2. These results indicate that the dialysis periods during chemical modification of natural polymer are important for removing unreacted chemical residues and for the potential application of the manufacturing standardization for chemically modified hydrogel for the clinical transplantation for tissue engineering and biomedical applications.

Diabetes mellitus renders patients susceptible to chronic wounds and various infections. Regarding the latter, fungal infections are of particular concern since, although they are the source of significant morbidity and mortality in immunocompromised patients, they are generally resistant to conventional treatment and a definite treatment strategy has not yet been established. Herein, we report the treatment of skin wounds in a diabetic rat model, infected by Candida albicans, with low temperature helium plasma generated in a hand-held atmospheric jet device. A fungal infection was induced on two dorsal skin wounds of the diabetic rats, and one wound was treated with the plasma jet whereas the other served as a control. Histological analysis revealed accelerated skin wound healing and decreased evidence of fungal infection in the plasma-treated group, as compared to the control group. Regeneration of the epidermis and dermis, collagen deposition, and neovascularization were all observed as a result of plasma treatment, but without wound contraction, scar formation or any evidence of thermal damage to the tissue. These findings demonstrate that the He plasma jet is remarkably effective in diabetic skin wounds infected by Candida albicans, thereby providing a promising medical treatment option for diabetes mellitus patients with skin wound and fungal infections.

In this present study, we introduce an innovative hybrid 3D bioprinting methodology that integrates fused deposition modeling (FDM) with top–down digital light processing (DLP) for the fabrication of an artificial trachea. Initially, polycaprolactone (PCL) was incorporated using an FDM 3D printer to provide essential mechanical support, replicating the structure of tracheal cartilage. Subsequently, a chondrocyte-laden glycidyl methacrylated silk fibroin hydrogel was introduced via top–down DLP into the PCL scaffold (PCL-Sil scaffold). The mechanical evaluation of PCL-Sil scaffolds showed that they have greater flexibility than PCL scaffolds, with a higher deformation rate (PCL-Sil scaffolds: 140.9% ± 5.37% vs. PCL scaffolds: 124.3% ± 6.25%) and ability to withstand more force before fracturing (3.860 ± 0.140 N for PCL-Sil scaffolds vs. 2.502 ± 0.126 N for PCL scaffolds, ***P < 0.001). Both types of scaffolds showed similar axial compressive strengths (PCL-Sil scaffolds: 4.276 ± 0.127 MPa vs. PCL scaffolds: 4.291 ± 0.135 MPa). Additionally, PCL-Sil scaffolds supported fibroblast proliferation, indicating good biocompatibility. In vivo testing of PCL-Sil scaffolds in a partial tracheal defect rabbit model demonstrated effective tissue regeneration. The scaffolds were pre-cultured in the omentum for two weeks to promote vascularization before transplantation. Eight weeks after transplantation into the animal, bronchoscopy and histological analysis confirmed that the omentum-cultured PCL-Sil scaffolds facilitated rapid tissue regeneration and maintained the luminal diameter at the anastomosis site without signs of stenosis or inflammation. Validation study to assess the feasibility of our hybrid 3D bioprinting technique showed that structures, not only the trachea but also the vertebral bone-disc and trachea-lung complex, were successfully printed.

Cell‐based tissue engineering strategies have been widely established. However, the contributions of the transplanted cells within the tissue‐engineered scaffolds to the process of tissue regeneration remain poorly understood. Near‐infrared (NIR) fluorescence imaging systems have great potential to non‐invasively monitor the transplanted cell‐based tissue constructs. In this study, labelling mesenchymal stem cells (MSCs) using a lipophilic pentamethine indocyanine (CTNF127, emission at 700 nm) as a NIR fluorophore was optimised, and the CTNF127‐labeled MSCs (NIR‐MSCs) were printed embedding in gelatin methacryloyl (GelMA) bioink. The NIR‐MSCs‐loaded bioink showed excellent printability. In addition, NIR‐MSCs in the 3D constructs showed high cell viability and signal stability for an extended period in vitro. Finally, we were able to non‐invasively monitor the NIR‐MSCs in constructs after implantation in a rat calvarial bone defect model, and the transplanted cells contributed to tissue formation without specific staining. This NIR‐based imaging system for non‐invasive cell monitoring in vivo could play an active role in validating the cell fate in cell‐based tissue engineering applications.