Taking the circular arc tooth trace (CATT) cylindrical gear as a research object, in order to obtain the CATT cylindrical gear’s meshing contact impact properties, the meshing contact impact hypothesis of the CATT cylindrical gear was put forward based on the contact dynamics theory and gear transmission physical model, and the gear mesh contact impact model was set up further. The finite element solution algorithm for solving the impact problem was given. Then, the accurate 3D model was set up based on the gear tooth surface equation, and the finite element analysis models of the meshing contact impact with different impact positions were established further. The model was to study the distribution rule of the gear surface meshing contact impact stress and relationship between the impact velocity, impact position, and the impact stress. Moreover, the reason for the maximum impact stresses distribution rule of primary and secondary impact tooth surface was discussed. Research result shows the driven wheel dangerous areas of gear root impact are the gear top of the primary impact tooth surface and the gear root of the secondary impact tooth surface; the driven wheel dangerous areas of gear top impact are the gear root of the primary impact tooth surface and gear top of the secondary impact tooth surface; the driven wheel dangerous areas of pitch circle are the gear root and pitch circle of secondary impact tooth surface; and impact velocity and impact position have a major influence on the impact stress. The study results provide a theoretical basis for the dynamic design and industrial application of CATT cylindrical gears.
Variable tooth thickness gears have significant effects on the characteristics of the flow field inside the gearbox and the lubrication efficiency under high-speed operating conditions due to their complex parameters, such as tooth profile, cone angle, rotational speed, and oil injection speed. To investigate the impact mechanism of oil injection velocity on the working flow field of high-speed variable tooth thickness gears under varying parameters, this paper establishes an oil injection lubrication model under high rotational speeds of variable tooth thickness gears, based on computational fluid dynamics (CFD) methods and the Volume of Fluid (VOF) model, combined with the dynamic mesh technique. This paper analyzes the lubrication issues at the initial oil injection moment of involute variable tooth thickness gears. By computing the lubricant distribution state at 0.1 s after the oil injection onset based on the stabilized flow field under no-oil-injection condition, discussions are conducted on the single-phase and two-phase flow fields within the gear casing at different cone angles and rotational speeds separately examining the flow states near the oil nozzle and the distribution patterns of lubricant at the meshing portions. The results indicate that, without oil injection, the pressure near the oil nozzle gradually increases with an increase in rotational speed and decreases with an increase in cone angle; at the initial oil injection moment, the lubricant volume fraction at the gear meshing portions gradually increases with an increase in rotational speed and rises with an increase in cone angle.
9 March 2012 in The International Journal of Advanced Manufacturing Technology
In order to enhance the load-bearing capacity of the involute beveloid gear pair, this study proposes research on improving the contact stress through axial modification. Under the condition of segmented parabolic axial modification, the mathematical equation for the tooth flank of the beveloid gear is derived. A simulation meshing model for the beveloid gear pair is constructed to investigate the effects of different amounts and lengths of axial modification on the meshing performance, changes in flank and root stress, and transmission error before and after modification. The results indicate that as the modification amount increases, the maximum equivalent stress initially decreases and then exhibits a tendency towards stability. Moreover, an increase in modification length concentrates the contact zone towards the middle of the tooth flank while expanding the range of tooth root stress distribution, and it also leads to a decrease in maximum equivalent stress. The implementation of the modification has been observed to result in a reduction in cumulative transmission error and an effective reduction in edge load on the beveloid gear pair, which has been demonstrated to enhance the bearing capacity and transmission stability extension while also impacting the dynamic meshing performance.