Wilmer Velilla-Díaz

Dr. Wilmer Velilla-Díaz

Austral University of Chile, Valdivia, Los Ríos, Chile
+1
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
JPJosé David Perez-Ruiz
José David Perez-Ruiz
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
MAMikel Abasolo
Mikel Abasolo
Gaizka Gómez-EscuderoGaizka Gómez-Escudero
Gaizka Gómez-Escudero
Luis Norberto López De LacalleLuis Norberto López De Lacalle
Luis Norberto López De Lacalle
Fracture toughness anisotropy is a key concern in IN718 components produced by Laser Powder Bed Fusion (LPBF), due to their strong crystallographic texture and characteristic lamellar microstructure. In this study, the effect of grain orientation on fracture toughness was evaluated by testing two LPBF IN718 builds with the same laser scanning strategy (R0), but with two different orientations: vertical (R0-0) and 45° inclined (R0-45) relative to the build direction. The mechanical response was assessed through compact tension (CT) tests following ASTM E399 and ASTM E1820 standards. Results show that the R0-45 specimens exhibited a fracture toughness nearly 2.5 times higher than R0-0 specimens. Detailed microstructural analysis, supported by EBSD and SEM, reveals that the higher toughness in the R0-45 orientation is linked to a combination of smaller effective grain size along the crack path, higher levels of geometrically necessary dislocations (GND), and increased kernel average misorientation (KAM), which collectively enhance plastic accommodation and crack-tip shielding. These findings support and reinforce the established understanding of the relationship between microstructure and anisotropic fracture behavior in LPBF IN718, facilitating its practical application in the design and orientation of additively manufactured components.

21 October 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
HRHabib Zambrano Rodríguez
Habib Zambrano Rodríguez
Molecular dynamics simulations of cracked nanocrystals of aluminum were performed in order to investigate the crack length and grain boundary effects. Atomistic models of single-crystals and bi-crystals were built considering 11 different crack lengths. Novel approaches based on fracture mechanics concepts were proposed to predict the crack length effect on single-crystals and bi-crystals. The results showed that the effect of the grain boundary on the fracture resistance was beneficial increasing the fracture toughness almost four times for bi-crystals.

9 March 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
LRLuis Ricardo
Luis Ricardo
ADArgemiro Palencia Díaz
Argemiro Palencia Díaz
HRHabib Zambrano Rodríguez
Habib Zambrano Rodríguez
In this publication, molecular dynamics simulations are used to investigate the fracture behavior of single-crystal aluminum. The stress intensity factor is estimated by means of four different methods, the accuracy is assessed for each approach and the fracture toughness is estimated. The proposed methodology is also applied to estimate the fracture toughness for graphene and diamond using published data from other scientific articles. The obtained fracture toughness for the single-crystal aluminum is compared with other nanomaterials that have similar microstructures. Dislocation emission during the fracture simulation of the cracked nano-crystal of aluminum is analyzed to study the fracture behavior. Brittle fracture behavior is the predominant failure mode for the nanomaterials studied in this research.

1 September 2019 in Computational Materials Science
Verified
Journal Article
Closed access
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
APAlejandro Pacheco-Sanjuan
Alejandro Pacheco-Sanjuan
HRHabib Zambrano Rodríguez
Habib Zambrano Rodríguez

1 February 2024 in Metals
Verified
Journal Article
Open access
PDF file
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
RPRoger J Pinzon
Roger J Pinzon
Renny Jesús Guillén RujanoRenny Jesús Guillén Rujano
Renny Jesús Guillén Rujano
JPJosé Perez-Ruiz
José Perez-Ruiz
Luis Norberto López De LacalleLuis Norberto López De Lacalle
Luis Norberto López De Lacalle
HRHabib Zambrano Rodríguez
Habib Zambrano Rodríguez
Fatigue crack growth tests are conducted to assess the efficacy of the stop-hole crack repair method. This straightforward and widely adopted technique involves drilling a hole at the crack tip and subsequently enlarging it using a pin inserted into the hole. A fracture mechanics-based model is proposed to estimate the extension of fatigue life achieved through the implementation of the stop-hole technique. The model’s predictions are validated using data obtained from fatigue crack growth tests conducted on both unrepaired and repaired M(T) specimens, following the guidelines outlined in the ASTM E647 standard. The error of the fracture mechanics-based model was 1.4% in comparison with the fatigue tests.

27 November 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Wilmer Velilla-DíazWilmer Velilla-Díaz
Wilmer Velilla-Díaz
HRHabib Zambrano Rodríguez
Habib Zambrano Rodríguez
This research article explores the effect of grain boundary (GB) misorientation on the mechanical behavior of aluminum (Al) bicrystals by means of molecular dynamics (MD) simulations. The effect of GB misorientation on the mechanical properties, fracture resistance, and crack propagation are evaluated under monotonic and cyclic load conditions. The J-integral and the crack tip opening displacement (CTOD) are assessed to establish the effect of the GB misorientation angle on the fracture resistance. The simulations reveal that the misorientation angle plays a significant role in the mechanical response of Al bicrystals. The results also evidence a gradual change in the mechanical behavior from brittle to ductile as the misorientation angle is increased.