Recent developments in the electricity sector encourage a high penetration of Renewable Energy Sources (RES). In addition, European policies are pushing for mass deployment of Electric Vehicles (EVs). Due to their non-controllable characteristics, these loads have brought new challenges in distribution networks, resulting in increased difficulty for Distribution System Operators (DSOs) to guarantee a safe and reliable operation of the grid. Battery Energy Storage Systems (BESSs) are promising solutions for mitigating the impact of the new loads and RES. In this paper, different aspects of the BESS's integration in distribution grids are reviewed. At first, the physical layer will be considered, focusing on the main battery technologies commercially available and on the power electronics converter. Secondly, the different functionalities that a grid-connected BESS can provide will be investigated, and then its sizing, location and control in distribution network will be discussed. In addition, an overview of actual BESSs installations is given. All in all, this paper aims at providing a comprehensive view of BESSs integration in distribution grids, highlighting the main focus, challenges, and research gaps for each one of these aspects.

Microgrid with integrated photo-voltaics (PV) and battery storage system (BSS) is a promising technology for future residential applications. Optimally sizing the PV system and BSS can maximise self-sufficiency, grid relief, and at the same time can be cost-effective by exploiting tariff incentives. To that end, this paper presents a comprehensive optimisation model for the sizing of PV, battery, and grid converter for a dc microgrid system considering multiple objectives like energy autonomy, power autonomy, payback period, and capital costs. The proposed approach involves developing a holistic techno-economic microgrid model based on variables like PV system power, azimuth angle, battery size, converter ratings, capital investment and electricity tariffs. The proposed method is applied to determine the optimum capacity of a PV system and BSS for two case residential load profiles in the Netherlands and Texas, US to investigate the effect of meteorological conditions on the relative size of PV and battery. Based on the optimisation results, thumb rules for optimal system sizing are derived to facilitate microgrid design engineers during the initial design phase.

Battery Energy Storage Systems typically procure their primary revenues from regulated energy and ancillary services markets; nonetheless, they have great potential in supporting distribution network operators and their users. This paper evaluates the potential business case of battery storage systems integrating market application and services to a photovoltaic assisted electric vehicle fast-charging station. A mathematical deterministic optimization problem is formulated using mixed-integer linear programming to combine battery storage system operation in the day-ahead and frequency regulation market and the remunerated services offered to the charging station. The technical and economic feasibility of the solution and the applicability of the proposed framework is verified through a case study reflecting an existing photovoltaic assisted charging station in the Netherlands and considering the Dutch energy market framework and prices. The study shows that such battery storage system implementation is economically and technically advantageous for the players involved. The battery storage system can stack additional revenues on top of the market revenues. The charging station benefits from a reduced peak power and a 30% tariff reduction, and the system operator would indirectly benefit from the shaved charging station profile. Furthermore, the analysis shows that providing services to the charging station from the battery storage system does not significantly impact its market-related revenues.

Renewable energy power plants and transport and heating electrification projects are being deployed to enable the replacement of fossil fuels as the primary energy source. This transition encourages distributed generation but makes the grid more weather-dependent, thus reducing its inertia. Simultaneously, electrical network operators face voltage, frequency, and stability challenges at the distribution level. Networks were not designed to manage the stochasticity of renewable energy sources or the congestion caused by the new transport and heating demands. Such challenges are commonly addressed through infrastructure reinforcements. This review studies how energy storage systems with different carriers can provide a collaborative solution involving prosumers as ancillary services providers at the distribution level. We focused on the European urban context; thus, we analyzed renewable energy sources, batteries, supercapacitors, hydrogen fuel cells, thermal energy storage, and electric vehicles. A thorough review of successful implementations proved that including storage in one or more carriers benefits the distribution system operators and the prosumers, from both technical and economic perspectives. We propose a correlation between individual energy storage technologies and the ancillary services they can provide based on their responses to specific grid requirements. Therefore, distribution system operators can address network issues together with the prosumers. Nevertheless, attractive regulatory frameworks and business models are required to motivate prosumers to use their assets to support the grid. Further work is recommended to describe the joint operation of multiple storage technologies as multicarrier systems, focusing on the coupling of electrical and thermal energy storage. Additionally, how ancillary services affect the energy storage system’s aging should be studied.

Battery Energy Storage Systems (BESSs) are a new asset for Primary Frequency Regulation (PFR). PFR consists of varying the generator's power output proportionally to the frequency deviations, so to preserve the grid stability. The implementation and remuneration of PFR are determined by the system operators. However, assessing the revenue stream is not enough to define the business case, as also the components' lifetime has to be estimated. Previous studies of lifetime estimation for BESSs performing PFR considered only the electrochemical storage, disregarding the power electronics. Nonetheless, researchers have shown the importance of estimating power electronics wear due to the operation when applied in renewable energy generation and microgrid. This paper presents a lifetime analysis of BESSs providing PFR considering IGBT modules, electrolytic capacitors and electrochemical storage degradation. The lifetime information are used to estimate BESS's Net-Present-Value (NPV), therefore evaluating the benefits of deploying power electronics based BESS in the grid. A comparison between different countries, Germany, Netherlands, and UK, is performed, considering the PFR implementation and remuneration differences. The analysis shows that the BESS management strategy can extend its lifetime and that the component that exhibits the shortest lifetime is the electrochemical storage. In conclusion, the provision of PFR by means of BESS has been found to be profitable.

Employing bipolar dc distribution systems introduces the possibility of imbalance in the system. To analyze these systems it is crucial to create novel modelling techniques. This paper presents a method to decompose dc distribution systems into symmetrical components. The presented method simplifies the analysis of balanced, unbalanced, and fault conditions of bipolar dc distribution systems. Equivalent circuits for several network components in the symmetrical domain are derived and are shown to be independent under symmetrical conditions. Furthermore, a dynamic analysis is performed in the symmetrical domain showing that the method simplifies the analysis of dc distribution systems. Additionally, the symmetrical domain equivalent circuits of several fault conditions are derived.