The properties of coral sands are significantly affected by the gradation changes caused by the particle breakage. In this paper, a series of triaxial consolidated drained (CD) shear tests were carried out to investigate the influence of gradation on the particle breakage and mechanical properties of coral sands. The results showed that the softening and dilatancy during shearing are more significant for coral sands with smaller average particle sizes under low confining pressure. The peak friction angle decreases with the confining pressure and can be fitted by a power function for different gradations. The particle size distribution of the “hyperbolic” or “straight” curve has a trend to transform into a “sigmoidal” type after shearing; and the variation is affected by the confining pressure and the initial gradation. The critical state lines of the coral sands with different gradations are parallel straight lines on the plane. In addition, the relative breakage of coral sand particles increases with the confining pressure and the mean particle size. Based on the triaxial compression test results, the expressions relating relative breakages to the confining pressure and the gradation parameters were proposed.
14 May 2021 in Marine Georesources & Geotechnology
Particle breakage is a significant phenomenon that distinguishes coral sand from other granular materials. This study aims to build an elastoplastic constitutive model which can describe the mechanical behaviour of coral sand at different relative densities and confinement conditions. According to the results of triaxial compression test and isotropic compression test, the expression of the critical state line (CSL) considering particle breakage and a new hardening rule based on unified hardening parameter was proposed, respectively. A shape parameter of yield surface which incorporates the impact of particle breakage and relative density simultaneously was defined. Then, an elastoplastic constitutive model of coral sand considering the particle breakage and relative density was established by introducing the new hardening rule and the shape parameter. By comparing the results of triaxial compression tests with that of the elastoplastic constitutive model, the model was proved to be able to predict the mechanical behaviour of coral sand at different relative densities and confining pressures.
The coefficient of earth pressure at rest K0 is a state soil variable correlated with relative density Dr. As previously conducted K0 tests could not guarantee zero lateral deformation in the sand specimens, significant errors occurred in the test results. In this paper, a centrifugal model test method is used to study the K0 of sand with varying densities. The sand specimens with varying relative densities are prepared by sand pluviation, and a 50 g-ton centrifugal force is applied. Subsequently, the relationship of K0 and Dr with different densities is analyzed. The test results show that for the same type of sand, the value of K0 gradually increased with Dr. Based on the meso-evolution characteristics of sand particle recombination, various relationships between K0, the displacement deflection angle, and the friction offset angle between particles are analyzed. Furthermore, the relationship between particle volume fraction and K0 is derived, the assumption of increasing the coefficient K0 with the increase in Dr is verified, and the effect of Dr of sand on the force transfer behavior of the internal particle fabric is briefly discussed. The research results could significantly improve the current earth pressure theories.
To tackle the limitations of conventional seismic design in high-intensity zones, as well as the challenges of inadequate isolation efficiency, excessive bearing displacement, and tensile stress in seismically isolated high-rise structures, this study presents a systematic solution for high-rise shear wall structures in seismic intensity 8 zones. The solution features a sparse isolator layout strategy, reducing isolator count by 40% to lower stiffness, while adding viscous dampers in the isolation layer for enhanced displacement control. Comparative nonlinear time history analyses were conducted to evaluate the inter-story shear distribution, energy dissipation allocation, and isolator responses. The results show that (1) the sparse layout achieves the best performance in controlling the bottom shear ratio and Maximum Considered Earthquake (MCE)-level responses (including displacement and tensile stress); (2) viscous dampers significantly reduce the shear forces in the lower stories and the energy dissipation of both isolators and the superstructure; (3) the combined strategy successfully resolves the issues of excessive isolator displacement and tensile stress under MCE. This research offers a standardized, economical, and highly resilient technical approach for seismically isolated high-rise projects in high-intensity seismic regions.