Aircraft, such as amphibious planes, airliners, helicopters and re-entry capsules, are frequently subject to impacting loads from water-landing/ditching on various free surfaces, especially under wave conditions. Understanding and quantifying the water-landing/ditching performance on wave surfaces are of fundamental important for the design and certification of crashworthiness in the field of aerospace engineering. This study aims to numerically assess the effect of wave surface on water-landing process of an amphibious aircraft. The numerical implementation is realized in Reynolds-averaged Navier–Stokes (RANS) framework by combining finite volume method (FVM), volume of fluid (VOF) approach and velocity-inlet wavemaker. The temporal-spatial characteristic of numerical wave and the accuracy of presented model are, respectively, validated by analytical wave and convergence studies. The aircraft landing simulations with different free surface conditions, i.e., calm water, regular wave with different wave heights are then performed and quantitatively compared through several physical parameters, including acceleration, velocity, pressure, pitch angle and free surface deformation. It was found that the aircraft regular wave-landing process experiences several unique stages comparing with the calm-water-landing case. The results clearly confirm that wave surface can influence the aircraft landing performance to a great extent. The fundamental mechanism is found to be that the wave surface slope and wave particle velocity remarkably change the impacting position and effective impacting velocity of the aircraft.

By combining the flapping and rotary motion, a bio-inspired flapping wing rotor (FWR) is a unique kinematics of motion. It can produce a significantly greater aerodynamic lift and efficiency than mimicking the insect wings in a vertical take-off and landing (VTOL). To produce the same lift, the FWR’s flapping frequency, twist angle, and self-propelling rotational speed is significantly smaller than the insect-like flapping wings and rotors. Like its opponents, however, the effect of variant flapping frequency (VFF) of a FWR, during a flapping cycle on its aerodynamic characteristics and efficiency, remains to be evaluated. A FWR model is built to carry out experimental work. To be able to vary the flapping frequency rapidly during a stroke, an ultrasonic motor (USM) is used to drive the FWR. Experiment and numerical simulation using computational fluid dynamics (CFD) are performed in a VFF range versus the usual constant flapping frequency (CFF) cases. The measured lifting forces agree very well with the CFD results. Flapping frequency in an up-stroke is smaller than a down-stroke, and the negative lift and inertia forces can be reduced significantly. The average lift of the FWR where the motion in VFF is greater than the CFF, in the same input motor power or equivalent flapping frequency. In other words, the required power for a VFF case to produce a specified lift is less than a CFF case. For this FWR model, the optimal installation angle of the wings for high lift and efficiency is found to be 30° and the Strouhal number of the VFF cases is between 0.3–0.36.

This study investigated the mechanical performance of the edge-closed honeycomb sandwich structure with face/core debonding under compressive load by experimental and numerical methods. Uniaxial compression tests of asymmetric sandwich structures with various debonding sizes between the carbon/epoxy face sheets and the honeycomb core were conducted. The experimental results showed that the failure of debonding specimens was mainly caused by the local buckling of face sheets at the debonding area. The failure zone of sandwich structures gradually translated from the edge-closed beveled area to the debonding area with the increase of debonding sizes correspondingly, Meanwhile, the stability and the load carrying capacity of sandwich structures were in a downtrend. Compared with the nondestructive specimens, the residual strength of two kinds of defective specimens decreased by 9.9% and 22.1%, respectively. The simulation of the developed numerical model based on the linear buckling theory and the continuum damage mechanics agreed well with the experimental data. The study has guide to assess on the damage tolerance of edge-closed honeycomb sandwich panels with face/core debonding.

This study investigates the thermal stress and bolt load distribution in a hybrid panel structure of an aircraft mechanical joint under extreme temperatures. The hybrid panel structure comprises two aluminum alloy splices, six T-shaped composite stringers, and two composite skins, secured together with 96 bolts. This study analyzed the strain induced by thermal stress on composite materials and metals within the structure across temperatures, employing temperature environment tests ranging from room temperature to −54 °C, alongside a carrying capacity test at −54 °C. Furthermore, a three-dimensional simulation model of the panel structure was developed, incorporating considerations for contact, metal elastoplasticity, and the progressive damage failure of composite materials. This model facilitated the determination of thermal stress and bolt load distribution patterns. The results indicate a strong consistency between the finite element analysis outcomes and the experimental data. Temperature variations exacerbate the uneven distribution of bolt loads, concentrating the load near the edges of the hybrid structure while diminishing it in the center. The bolt load distribution parallel to the mechanical load direction forms an “M” shape, with a maximum load magnitude of approximately 31 kN. Perpendicular to the mechanical load, the bolt load undergoes significant changes, especially at the edges, reaching a maximum of about 20 kN, which warrants attention. The bolt-load distribution of the structure with the increase in mechanical load at −54 °C tends to be consistent with that at room temperature.

In order to study the nonlinear behaviors and interactions among the constituents for the composite material structure under the tensile load, multiscale damage model using generalized method of cells (GMC) and a lamina-level progressive damage model were established, respectively, for fiber reinforced composite laminates with a central hole, which were based on the thermodynamic Schapery Theory (ST) at either the micro-level or the lamina level. Once the nonlinear progressive degradation of the matrix material reached the lower limit value for the ST method, matrix failures naturally occurred, the failure of the fiber was determined by the maximum stress failure criterion. For the multiscale progressive damage model, the GMC model consisting of a fiber subcell and three matrix subcells was imposed at each integral point of FEM elements, and the three matrix subcells undergo independent damage evolution. The load versus displacement curves and failure modes of the open-hole laminates were predicted by using the two progressive failure models, and the results were compared with that obtained by the Hashin-Rotem progressive failure model and the experimental results. The results show that the ST based method can obtain the nonlinear progressive damage evolution states and failure states of the composite at both the lamina level and the multiscale level. Finally, the damage contours and failure paths obtained are also presented.