In this article, the application of the FRAME (Frequency Recognition Algorithm for Multiple Exposures) technique is presented for multi-species measurements in symmetric and asymmetric ethylene/air diffusion flames. Laminar Bunsen-type and swirled diffusion flames are investigated to gain a better understanding of sooting combustion. For this purpose, simultaneous imaging is conducted in terms of Laser-Induced Fluorescence (LIF) of Polycyclic Aromatic Hydrocarbons (PAH) and Laser-Induced Incandescence (LII) of soot particles. Subsequently, the approach is utilized for simultaneous imaging of hydroxyl (OH)-LIF and soot-LII. Here, the modulated LIF- and LII-signals are acquired together as a single sub-image—with a single exposure utilizing the full sensor size of a single camera. By employing the frequency-recognition algorithm on the single image, the LIF- and LII-signals are spectrally isolated—generating two individual LIF- and LII-images. The flame luminosity and out-of-focus light such as reflected surrounding laser light are detected as non-modulated signals in the unprocessed image. These unwanted signals are suppressed using the image post-processing, and, therefore, the image contrast of the two resulting images is improved. It is found that PAHs mainly exist in the inner region near the burner and are surrounded by soot. The majority of the OH is distributed on the outer edges of the flame—representing the reaction zone and soot-oxidation region of the flame.
Measurement of chemical species and temperature mapping in flames is essential to understanding the combustion process. Multiple cameras are conventionally employed for measurement in such scenarios making the experimental setup not only cost-intensive but also challenging. To circumvent this, structured illumination (SI)-based methods are reported for multispecies chemiluminescence (CL) imaging using a single camera. In this paper, we demonstrate four-channel SI-based imaging for simultaneous snapshot CH∗ and C2∗ CL imaging and two-color pyrometry for temperature profiles in a butane diffusion flame. We demonstrate our approach using individual species and multiple species imaging. Taking the advantage of the axisymmetric nature of the flame, the Abel transform is performed on the line-of-sight averaged images to obtain deconvoluted images. The deconvoluted maps of temperature are compared with the temperature data obtained by using a physical thermocouple probe.
We report the three-dimensional (3D) mapping of polycyclic aromatic hydrocarbons (PAHs), soot, and hydroxyl radicals (OH) in ethylene/air diffusion flames. A structured illumination-based frequency recognition algorithm for multiple exposures (FRAME) approach is combined with sample translation to intersect the flame in several two-dimensional planes. The FRAME technique has been used for recording a snapshot of multiple species on a single camera. It relies on extracting the amplitude of spatial modulation of two or more probed species encoded on a single sub-image. Here, the FRAME technique is first applied for simultaneous imaging of PAH by laser-induced fluorescence (PAH-LIF) and soot by laser-induced incandescence (LII). Sequentially, it is employed for simultaneous mapping of OH-LIF and soot-LII. The LII signal is converted to absolute soot volume fraction (fv) maps using a line-of-sight light extinction measurement. Finally, we have demonstrated the approach for layer-wise 2D imaging of soot volume fraction and averaged 3D mapping of multiple species.
The present study aims to understand droplet fragmentation due to instabilities from the radiative heating process. We focus on the plasma-induced breakup mechanism of iso-octane and n-hexane droplets from the nucleation of holes through sheets and instabilities. The plasma generation inside the droplets leads to an intense explosion followed by fragmentation of the droplets. A droplet is suspended in the air using an acoustic levitator and exposed to ultraviolet nanosecond laser pulses. The droplet sizes used are in the range of 0.5–2 mm in diameter, and laser energies are 10–20 mJ per pulse. Initially, plasma formation followed by shock wave emission is observed during the impact of the laser pulse. Afterward, the droplet opens at one side and is stretched vertically to form a liquid sheet. The hole formation and its rapid growth result in the breaking of the thin liquid sheet. Small droplets and ligaments emerge from the circular edge of the sheet, which follows the well-known ligament distribution. This study reveals the detailed analysis of expansion dynamics, evolution of single and multiple holes, and instabilities associated with the liquid sheet. The results observed are categorized into four different mechanisms: (1) plasma formation followed by shock wave propagation, (2) droplet deformation, (3) sheet breakup through nucleation of holes followed by rapid growth, and (4) complete atomization.
Snapshot multispectral imaging of chemical species in the flame is essential for improved understanding of the combustion process. In this article, we investigate the different configurations of a structured laser sheet-based multispectral imaging approach called the Frequency Recognition Algorithm for Multiple Exposures (FRAME). Using FRAME, a snapshot of Laser-Induced Fluorescence (LIF) of Polycyclic Aromatic Hydrocarbons (PAH) excited by 283.5 nm laser and Laser-Induced Incandescence (LII) of soot particles excited by 532 nm laser are acquired simultaneously on a single FRAME image. A laminar diffusion flame of acetylene produced by a Gülder burner is used for the experiments. The standard FRAME approach is based on creating two spatially modulated laser sheets and arranging them in a cross-patterned configuration (X). However, the effect of using different configurations (angles) of the two laser sheets on the multispectral planar imaging of the flame has not yet been studied. Therefore, we have compared the FRAME approach in four different configurations while keeping the same flame conditions. First, we have compared the relation between laser fluence and LII signals with and without spatial modulation of the 532 nm laser sheet and found that both detections follow the same curve. When comparing the maps of flame species reconstructed from the standard FRAME configuration and other configurations, there are some dissimilarities. These differences are attributed to minor changes in the imaging plane, optical alignment, laser path length, different modulation frequencies of the laser sheet, laser extinction, laser fluence, etc.