Hu Daoyu

Dr. Hu Daoyu

Institute of Magnetic Levitation and Electromagnetic Propulsion, China Aerospace Science & Industry Crop.
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
KMKai Mao
Kai Mao
HDHu Daoyu
Hu Daoyu
YZYi Zhang
Yi Zhang
JWJitan Wu
Jitan Wu
XLXuyang Liu
Xuyang Liu
YJYindong Ji
Yindong Ji
The conception of the space electromagnetic launch is to use electromagnetic propulsion technology to accelerate a space launch vehicle on the ground to supersonic speed, which can reduce the takeoff quality and cost of the space launch vehicle. High-temperature superconducting linear synchronous motors (HTS-LSMs) are promising in space electromagnetic launch applications with the advantages of high thrust density, high efficiency, large electromagnetic gap and liquid-helium-free cooling. Adopting on-board solid-nitrogen (SN 2 )-cooled HTS mover magnets is one method to overcome the constraints of space limitation and weight reduction. To examine the thermal stability of SN 2 -cooled mover magnets, this work aims to study an HTS magnet as the mover magnet of an HTS-LSM using static and dynamic tests, including refrigeration tests, excitation tests, cryocooler turned off tests and electromagnetic vibration tests. The static test results show that the magnet could be cooled to below 27 K and excited to 246 A. The dynamic test results show that the magnet could withstand a vibration environment of up to 11.14 gRMS without quenching and structural damage. This study provides useful information for the design and application of an on-board SN 2 -cooled HTS-LSM mover magnet.

18 January 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
KMKai Mao
Kai Mao
YJYindong Ji
Yindong Ji
XDXiufang Du
Xiufang Du
HDHu Daoyu
Hu Daoyu
In this paper, a structural dynamics modeling method is proposed for developing an on-board high-temperature superconducting (HTS) solid nitrogen (SN 2 ) cooled magnet for high-speed maglev. Both the effects of the electromagnetic force caused by ground coil harmonic magnetic fields and the thermal stress were considered. To verify the effectiveness of this model, an HTS SN 2 -cooled mover magnet prototype of an HTS linear synchronous motor (LSM) was fabricated, and its vibration characteristics were tested by an electromagnetic vibration simulator. The effectiveness of the structural dynamics model was verified by comparing the time-domain and frequency-domain analysis of the experimental and calculated vibration response. Based on the verified model, the influence of the harmonic magnetic field magnitude and the outer cryostat material parameters were discussed in detail. The results of this paper can provide useful information for evaluating the structural dynamics characteristics of on-board HTS magnets for high-speed maglev.

1 June 2025 in Superconductor Science and Technology
Verified
Journal Article
Closed access
HDHu Daoyu
Hu Daoyu
YZYi Zhang
Yi Zhang
JWJitan Wu
Jitan Wu
XLXuyang Liu
Xuyang Liu
ZZZhihua Zhang
Zhihua Zhang
This work aims at designing, fabricating and testing a type of high-temperature superconducting (HTS) magnets with cooling-power-free and persistent-current operation for maglev launch. The HTS magnets serve as the suspension magnets of the superconducting electrodynamic suspension system and the mover magnets of the superconducting linear synchronous motor, simultaneously. First, the design of the overall structure, HTS coils, persistent-current switch (PCS) and metal supporting components are described in detailed. The technologies of detachable helium gas circulation refrigeration, solid-nitrogen protection, heater-triggered PCS, and 3D printing manufacturing are adopted. Second, the cooling-down, excitation, closed-loop, and refrigeration turned-off tests are performed to preliminarily verify the correctness of the design. Finally, the HTS magnets are mounted on a sled and a high-speed suspension and propulsion test is performed to comprehensively study the characteristics of the HTS magnet in a 400 m-long test track. The experimental results show that the on-board HTS SN2-protected magnets can operate stably with a maximum speed of 234 km h−1 with cooling-power free and persistent-current operation. This study provides useful information for the design and application of the HTS magnets for maglev launch.

23 July 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
SLSiyuan Liang
Siyuan Liang
HDHu Daoyu
Hu Daoyu
ZZZhihua Zhang
Zhihua Zhang
WZWei ZHOU
Wei ZHOU
KLKun Liu
Kun Liu
YZYi Zhang
Yi Zhang
In a superconducting electrodynamic suspension train, a high temperature superconducting (HTS) magnet gradually accelerates to levitation speed under the action of the ground module traveling wave magnetic field, and then achieves levitation. During this process, propulsion coils and suspension coils will generate varying degrees of harmonic magnetic fields on the surface of the dynamic HTS magnet with variations in speed. Due to the influence of external harmonic magnetic fields, electromagnetic losses are generated in the HTS magnet’s outer Dewar, thermal shield, and inner Dewar, including eddy current loss, ac loss, etc. If the thermal load generated during operation is too large, it will increase the operating burden of cryogenic system, resulting in the inability of refrigerant to operate in a closed loop. Furthermore, without any effective measures, harmonic penetration into the interior of the HTS magnet may cause local overheating of the HTS coil, leading to quench accidents. Therefore, this article conducts a simulation study on the electromagnetic loss characteristics of magnets within the range of 0–600 km/h. The electromagnetic loss variation process of HTS magnets is analyzed from two parts: the launch phase and the suspension phase. The electromagnetic loss distribution characteristics and thermal load variation law of HTS magnets in the dynamic process are obtained, and the corresponding thermal stability of HTS coils is analyzed.

8 December 2022 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
HDHu Daoyu
Hu Daoyu
KMKai Mao
Kai Mao
YZYi Zhang
Yi Zhang
In this paper, the vibration adaptability of high-temperature superconducting (HTS) coils after primary curing and secondary curing was experimentally studied. Three HTS coils were fabricated using YBCO tape. First, the three coils were cured with MY750 epoxy resin, and random vibration experiments were independently performed in the x -, y - and z -directions. Second, two of the three coils were selected to be cured together with the same epoxy resin in a metal coil case, and the same vibration tests were performed again. The feasibility and effectiveness of the primary and secondary curing processes were confirmed by comparing the voltage-current ( U-I ) curves measured before and after curing and vibration tests. The experimental results showed that there was no performance degradation of the HTS coils cured by the primary and secondary curing processes after 20g RMS random vibration tests. The results of this paper could provide a new choice for the HTS coil curing process.

31 October 2025 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
HDHu Daoyu
Hu Daoyu
JWJitan Wu
Jitan Wu
YZYi Zhang
Yi Zhang
XLXuyang Liu
Xuyang Liu
In this article, a thermal network modeling method is proposed for an on-board HTS magnet, which functions as the moving magnet in a superconducting linear synchronous motor and electrodynamic suspension system used in electromagnetic launching applications. The on-board HTS magnet is cooled by cryogenic helium gas with solid-nitrogen (SN2) protection. The thermal network model (TNM) is coupled with the finite element analysis (FEA) method. First, the structure of and simplification method for the on-board HTS magnet are introduced in detail. Second, the thermal processes and corresponding thermal network of the on-board HTS magnet are presented. Third, to verify the effectiveness of the proposed FEA−TNM hybrid, an SN2-prorection HTS magnet prototype is fabricated, and its thermal characteristics are tested by different refrigeration experiments. The measured and calculated temperatures of the sensors installed in different temperature ranges agree well with each other. On the basis of the verified model, a thermal optimization strategy is discussed. The results of this article provide a fast simulation method for the thermal design and optimization of HTS magnets.