Kun Liu

Kun Liu

Auto-generated profile, based on publicly available information

Kun Liu

Institute of Magnetic Levitation and Electromagnetic Propulsion, China Aerospace Science and Industry Corporation, Beijing, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
GLGang Liu
Gang Liu
CLCong Liu
Cong Liu
XXXiong Xiaofu
Xiong Xiaofu
JHJian Hao
Jian Hao
LKLiu Kun
Liu Kun
RLRuijin Liao
Ruijin Liao
The disadvantages of the traditional three-column core structure three-phase three component transformer is its incomplete symmetry, the different magnetic circuit length and the coupling parameters, which leads to each phase voltage error varies differently. In this paper, a new structure optimization design of a new type of three-phase three element combined transformer with a new three-cylinder core structure was proposed. The simulation analysis of the magnetic field distribution and the voltage error characteristics of the voltage transformer with new three-cylinder core structure was carried out at here. Compared with the traditional three-column core structure three phase three component transformer, the magnetic induction intensity distribution of the voltage transformer with the new three-cylinder core structure is more uniform. The simulation results of the voltage error characteristics under normal load condition also show that with the increase of voltage, the voltage error of the voltage transformer with three-cylinder core structure changes gently, and the error difference between three phases is smaller. The three-phase three component combined transformer with the new three-cylinder core structure has better error characteristics under normal load condition.

23 January 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
KLKun Liu
Kun Liu
GMGuangtong Ma
Guangtong Ma
CYChangqing Ye
Changqing Ye
WYWenjiao Yang
Wenjiao Yang
GLGang Li
Gang Li
YCYao Cai
Yao Cai
In this work, we experimentally investigated the dynamic re-sponses of stacked coated conductor tapes that were levitated over a Nd-Fe-B magnet guideway. The experiments were car-ried out on a recently designed test rig that can simultaneously measure the acceleration and levitation force during a vibration process. We applied three typical excitations, viz., unloading, free fall and pulsed excitation. The attenuation coefficient and damping ratio of such stack-based maglev system were analyzed by means of free vibration attenuation method. Last, the dynam-ic response of mechanical components of the stack-based maglev on pulsed excitation was visualized clearly. Results obtained by this study tell us that, the damping ratio is relative to the intensi-ty of external disturbance, which means a weak excitation will cause a small damping ratio and a longer convergence time, however, a larger damping ratio and a faster convergence of vibration will be presented when a stronger stimulation is im-posed on. This phenomenon could be contributed by the metal components of the stack, and is promising in practical applica-tion, particularly, in construction of HTS maglev where a large damping ratio is required.

23 July 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
SLSiyuan Liang
Siyuan Liang
HDHu Daoyu
Hu Daoyu
ZZZhihua Zhang
Zhihua Zhang
WZWei ZHOU
Wei ZHOU
KLKun Liu
Kun Liu
YZYi Zhang
Yi Zhang
In a superconducting electrodynamic suspension train, a high temperature superconducting (HTS) magnet gradually accelerates to levitation speed under the action of the ground module traveling wave magnetic field, and then achieves levitation. During this process, propulsion coils and suspension coils will generate varying degrees of harmonic magnetic fields on the surface of the dynamic HTS magnet with variations in speed. Due to the influence of external harmonic magnetic fields, electromagnetic losses are generated in the HTS magnet’s outer Dewar, thermal shield, and inner Dewar, including eddy current loss, ac loss, etc. If the thermal load generated during operation is too large, it will increase the operating burden of cryogenic system, resulting in the inability of refrigerant to operate in a closed loop. Furthermore, without any effective measures, harmonic penetration into the interior of the HTS magnet may cause local overheating of the HTS coil, leading to quench accidents. Therefore, this article conducts a simulation study on the electromagnetic loss characteristics of magnets within the range of 0–600 km/h. The electromagnetic loss variation process of HTS magnets is analyzed from two parts: the launch phase and the suspension phase. The electromagnetic loss distribution characteristics and thermal load variation law of HTS magnets in the dynamic process are obtained, and the corresponding thermal stability of HTS coils is analyzed.

22 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
HWHaoze Wang
Haoze Wang
ZWZhigang Wu
Zhigang Wu
KLKun Liu
Kun Liu
JWJingbo Wei
Jingbo Wei
HHHongjing Hu
Hongjing Hu
This paper presents a novel permanent magnet (PM) bias hybrid thrust magnetic bearing (HTMB), which can be used to replace the traditional thrust magnetic bearings (TMBs) for high-speed rotating machinery. By adding two PM rings and by reducing the number of the control coils by half, this HTMB eliminates the bias current, reduces the number of amplifiers, and minimizes the magnetic bearing’s structure complexity and power consumption. The analytical modelling method of the HTMB is presented in this paper. Mathematical models for calculating the magnetic force capacity and the stiffnesses of this bearing are derived as simplified formulae, which can be used for the design, analysis, and control of this bearing. Electromechanical characteristics of the HTMB are analyzed, which is compared to the traditional TMB to demonstrate the advantages of the HTMB. The prototype of the HTMB is designed, analyzed, and fabricated, whereas, the 2-D FEM is used to verify the design and the analytical model. Finally, an experimental setup is constructed and tested. The analytical and experimental results indicate that the proposed novel topology of this HTMB is feasible and the presented analytical model is accurate.

17 December 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
KLKun Liu
Kun Liu
WZWei ZHOU
Wei ZHOU
ZZZhihua Zhang
Zhihua Zhang
SLSiyuan Liang
Siyuan Liang
SWShaopeng Wu
Shaopeng Wu
DHDaoyu Hu
Daoyu Hu
The superconducting electrodynamic suspension (EDS) is one of the most promising technologies for developing an ultrahigh-speed maglev due to its special advantages. The superconducting coil (SC), which generates the force source for the EDS, is one of the key components. Improving the SC supporting characteristics, such as stiffness and damping, is an unavoidable challenge for enhancing the reliability and durability of the SC under long-term operation. Therefore, this article establishes a 3-D transient dynamic finite element model (FEM) to investigate the SC supporting characteristics. In this model, the frictional heat generation between the SC and the coil box is considered. First, the modeling method is verified by the one-degree-of-freedom (ODOF) vibration system, incorporating damping and friction. Second, the time-varying loads of suspension, guidance, and drag of 600 km/h are calculated based on dynamic-circuit theory and the virtual displacement method, and the stiffness of a self-developed SC support structure is tested. Third, based on the validated modeling method, the calculated time-varying loads, and the tested stiffness, the 3-D FEM of the SC is established. The dynamic response of the SC is estimated by the 3-D model, further, the support stiffness and damping are optimized. Finally, the influence of the friction coefficient on the frictional energy between the SC and coil box is investigated.

17 October 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
WZWei ZHOU
Wei ZHOU
WZWeiwei Zhang
Weiwei Zhang
KLKun Liu
Kun Liu
JYJinpeng Yu
Jinpeng Yu
LWLiu Wei
Liu Wei
ZZZhihua Zhang
Zhihua Zhang