Olugbenga S. Bello

Olugbenga S. Bello


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2015 in Applied Water Science
Verified
Journal Article
Open access
PDF file
AAAderonke Ajibola Adeyemo
Aderonke Ajibola Adeyemo
IAIdowu Olatunbosun Adeoye
Idowu Olatunbosun Adeoye
OBOlugbenga S. Bello
Olugbenga S. Bello
Increasing amount of dyes in the ecosystem particularly in wastewater has propelled the search for more efficient low-cost adsorbents. The effective use of the sorption properties (high surface area and surface chemistry, lack of toxicity and potential for ion exchange) of different clays as adsorbents for the removal of different type of dyes (basic, acidic, reactive) from water and wastewater as potential alternatives to activated carbons has recently received widespread attention because of the environmental-friendly nature of clay materials. Insights into the efficiencies of raw and modified/activated clay adsorbents and ways of improving their efficiencies to obtain better results are discussed. Acid-modified clay resulted in higher rate of dye adsorption and an increased surface area and porosity (49.05 mm2 and 53.4 %). Base-modified clay has lower adsorption capacities, while ZnCl2-modified clay had the least rate of adsorption with a surface area of 44.3 mm2 and porosity of 43.4 %. This review also explores the grey areas of the adsorption properties of the raw clays and the improved performance of activated/modified clay materials with particular reference to the effects of pH, temperature, initial dye concentration and adsorbent dosage on the adsorption capacities of the clays. Various challenges encountered in using clay materials are highlighted and a number of future prospects for the adsorbents are proposed.

31 January 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
OAOluwaseyi Aderemi Ajala
Oluwaseyi Aderemi Ajala
SASolomon Oluwaseun Akinnawo
Solomon Oluwaseun Akinnawo
ABAbayomi Bamisaye
Abayomi Bamisaye
DADemilade Tunrayo Adedipe
Demilade Tunrayo Adedipe
MAMorenike Oluwabunmi Adesina
Morenike Oluwabunmi Adesina
OBOlugbenga S. Bello
Olugbenga S. Bello
This study explores adsorptive removal measures to shed light on current water treatment innovations for kinetic/isotherm models and their applications to antibiotic pollutants using a broad range of biomass-based adsorbents.

28 October 2015 in Applied Water Science
Verified
Journal Article
Open access
PDF file
OBOlugbenga S. Bello
Olugbenga S. Bello
KAKayode Adesina Adegoke
Kayode Adesina Adegoke
OAOpeyemi Omowumi Akinyunni
Opeyemi Omowumi Akinyunni
A new and novel adsorbent was obtained by impregnation of Moringa oleifera leaf in H2SO4 and NaOH, respectively. Prepared adsorbents were characterized using elemental analysis, FT-IR, SEM, TGA and EDX analyses, respectively. The effects of operational parameters, such as pH, moisture content, ash content, porosity and iodine number on these adsorbents were investigated and compared with those of commercial activated carbon (CAC). EDX results of acid activated M. oleifera leaf have the highest percentage of carbon by weight (69.40 %) and (76.11 %) by atom, respectively. Proximate analysis showed that the fixed carbon content of acid activated M. oleifera leaf (69.14 ± 0.01) was the highest of all adsorbents studied. Conclusively, the present investigation shows that acid activated M. oleifera leaf is a good alternative adsorbent that could be used in lieu of CAC for recovery of dyes and heavy metal from aqueous solutions and other separation techniques.

8 February 2016 in Applied Water Science
Verified
Journal Article
Open access
PDF file
AOAdedamola Titi Ojedokun
Adedamola Titi Ojedokun
OBOlugbenga S. Bello
Olugbenga S. Bello
Guava leaf, a waste material, was treated and activated to prepare adsorbent. The adsorbent was characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infra Red (FTIR) and Energy-Dispersive X-ray (EDX) techniques. The carbonaceous adsorbent prepared from guava leaf had appreciable carbon content (86.84 %). The adsorption of Congo red dye onto guava leaf-based activated carbon (GLAC) was studied in this research. Experimental data were analyzed by four different model equations: Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms and it was found to fit Freundlich equation most. Adsorption rate constants were determined using pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion model equations. The results clearly showed that the adsorption of CR dye onto GLAC followed pseudo-second-order kinetic model. Intraparticle diffusion was involved in the adsorption process. The mean energy of adsorption calculated from D-R isotherm confirmed the involvement of physical adsorption. Thermodynamic parameters were obtained and it was found that the adsorption of CR dye onto GLAC was an exothermic and spontaneous process at the temperatures under investigation. The maximum adsorption of CR dye by GLAC was found to be 47.62 mg/g. The study shows that GLAC is an effective adsorbent for the adsorption of CR dye from aqueous solution.

1 August 2014 in Applied Water Science
Verified
Journal Article
Open access
PDF file
MAMohd Azmier Ahmad
Mohd Azmier Ahmad
NANorhidayah Ahmad
Norhidayah Ahmad
OBOlugbenga S. Bello
Olugbenga S. Bello
Mesoporous-activated carbon from durian seed (DSAC) was prepared; it was used as adsorbent for the removal of methyl red (MR) dye from aqueous solution. Textural and adsorptive characteristics of activated carbon prepared from raw durian seed (DS), char durian seed (char DS) and activated durian seed (DSAC) were studied using scanning electron microscopy, Fourier transform infra red spectroscopy, proximate analysis and adsorption of nitrogen techniques, respectively. Acidic condition favors the adsorption of MR dye molecule by electrostatic attraction. The maximum dye removal was 92.52 % at pH 6. Experimental data were analyzed by eight model equations: Langmuir, Freundlich, Temkin, Dubinin–Radushkevich, Radke–Prausnitz, Sips, Vieth–Sladek and Brouers–Sotolongo isotherms and it was found that the Freundlich isotherm model fitted the adsorption data most. Adsorption rate constants were determined using pseudo-first-order, pseudo-second-order, Elovich, intraparticle diffusion and Avrami kinetic model equations. The results clearly showed that the adsorption of MR dye onto DSAC followed pseudo-second-order kinetic model. Both intraparticle and film diffusion were involved in the adsorption process. The mean energy of adsorption calculated from D–R isotherm confirmed the involvement of physical adsorption. Thermodynamic parameters were obtained and it was found that the adsorption of MR dye onto DSAC was an endothermic and spontaneous process at the temperatures under investigation.

1 August 2019 in Heliyon
Verified
Journal Article
Open access
OBOlugbenga S. Bello
Olugbenga S. Bello
KAKayode Adesina Adegoke
Kayode Adesina Adegoke
OSOluwafunmilayo Oluwapamilerin Sarumi
Oluwafunmilayo Oluwapamilerin Sarumi
OLOlasunkanmi Seun Lameed
Olasunkanmi Seun Lameed
Activated carbon prepared from locust bean husk was modified using ortho-phosphoric acid (ALBP) and used to scavenge Rhodamine B (RhB) dye from aqueous solutions. Characteristic features of the adsorbents were investigated using SEM, FTIR, pHpzc and Boehm Titration (BT) techniques respectively. Batch studies were used to determine the influences of contact time, temperature and initial Rh-B dye concentrations. Adsorption data were analysed using four different isotherm models. The maximum monolayer adsorption capacity of 1111.1 mgg-1 was obtained for RhB dye adsorption. The kinetics of the adsorption process was studied using pseudo-first-order, pseudo-second-order Elovich and intraparticle diffusion models respectively. The experimental data was best described by pseudo-second-order kinetic model. Favourability of the process of adsorption was also established by the separator factor (RL) value ranging from 0 and 1, while the mean energy of adsorption (Ea) was 1.12 kJmol-1 suggesting that the removal of Rh-B dye from aqueous solution followed a physisorption process. For the thermodynamic investigations, the positive values of ΔS (280.956 Jmol-1K-1) indicates the affinity of adsorbent for the Rh-B dye uptake and increase randomness at the solid-solution interface during adsorption of Rh-B dye onto the surface of the active sites of ALBP. The negative value of ΔG (-31.892 to -26.355 kJmol-1) depicts the spontaneity and feasibility of the adsorption process. The cost analysis provides a simple proof that ALBP (42.52 USD per kg) is approximately six times cheaper than Commercial Activated Carbon, CAC (259.5 USD per kg). The present study therefore established the suitability of ALBP for effective removal of Rh-B dye from aqueous solutions.