The goal of this study is to investigate ship propulsion system dynamics under sea wave conditions by including the interaction of hull, propeller, and engine. A mathematical ship propulsion system model was made and the related computer code was developed. To get the results as close as possible to real conditions, measured data for physical models, including the ship’s resistance in calm and sea waves and propeller performance, were implemented in the model. For a diesel engine, performances provided by the manufacturer were used. The wave force time series, as exciting force, changed the propulsion system state from steady to transient. It activated system variables including ship’s speed, advance number, propeller and engine torque, propeller and engine rotational speeds, effective and generated powers, and net thrust. The analysis was performed for a container ship for two regular waves. Using the developed computer code, the ship’s speed and system variables, as well as the consumed fuel and the voyage distance, were calculated and compared with the calm water condition. The voyage mode was set on constant rotational engine speed implementing a P-action governor with fuel rate and engine torque limiters. The outcomes of the research explain the influence of the governor and its limiters on fuel consumption, identify the nonlinear impact of sea waves on propeller characteristics, and underline the effect of voyage mode on system response and the consumed fuel. The results also show that the conventional method for calculating speed reduction based on the added resistance is not capable of justifying the system’s dynamic behaviour.
This paper represents the first stage of research into a multi-objective method of planning safe trajectories for marine autonomous surface ships (MASSs) involved in encounter situations. Our method applies an evolutionary multi-objective optimisation (EMO) approach to pursue three objectives: minimisation of the risk of collision, minimisation of fuel consumption due to collision avoidance manoeuvres, and minimisation of the extra time spent on collision avoidance manoeuvres. Until now, a fully multi-objective optimisation has not been applied to the real-time problem of planning safe trajectories; instead, this optimisation problem has usually been reduced to a single aggregated cost function covering all objectives. The aim is to develop a method of planning safe trajectories for MASSs that is able to simultaneously pursue the three abovementioned objectives, make decisions in real time and without interaction with a human operator, handle basic types of encounters (in open or restricted waters, and in good or restricted visibility) and guarantee compliance with the International Regulations for Preventing Collisions at Sea. It should also be mentioned that optimisation of the system based on each criterion may occur at the cost of the others, so a reasonable balance is applied here by means of a configurable trade-off. This is done throughout the EMO process by means of modified Pareto dominance rules and by using a multi-criteria decision-making phase to filter the output Pareto set and choose the final solution
The problem of reduction of greenhouse gas emissions in shipping is currently addressed by many research works and related industries. There are many existing and visionary technologies and ideas, which are conceptually defined or practically realised. This goal can be achieved in different ways, and reducing fuel consumption is one of the major methods. In these circumstances, the aim of this study is to analyse the possibility of fuel consumption reduction by using an alternative control strategy for low-speed marine diesel engines which would take into account the interactions between hull, propeller and main engine. For this purpose, a mathematical model including ship hull and propulsion system is developed. A case study is conducted for a ship for which the results of both the ship hull and screw propeller model tests are available. A low-speed two-stroke diesel engine is then selected for the considered ship. Two different governors are included in the model and their parameters are changed to investigate the dynamic behaviour of the system when simulating the forward acceleration mode in calm sea conditions. The research is mainly focused on variations of fuel consumption by the ship passing a certain distance to reach the nominal constant speed. It is concluded that, for a given travel distance, it is possible to save considerable amount of fuel at the expense of slight increase of journey time.
The ship operability can be understood and analysed in different manners, and its quality is described using different indexes by different authors. Practically, there is no general and widely accepted description of total ship operability in the literature, nor in the rules of classification societies, which would include both seakeeping and manoeuvrability characteristics of a ship, and simultaneously take into account all ship subsystems and, what is most important, comfort and safety of people on board. The aim of this paper is to propose a general definition of total ship operability and name, adjust, describe and justify criteria which should be considered in the ship operability analysis, as well as to provide a relevant algorithm paving the road for further investigation on total ship operability determination.