Paracetamol adsorption in acidic, neutral and basic media on three activated carbons with different chemistry surfaces was studied. A granular activated carbon (GAC) was prepared from coconut shell; starting from this sample, an oxidized activated carbon (GACo) was obtained by treating the GAC with a boiling solution of 6 M nitric acid, so to generate a greater number of oxygenated surface groups. In addition, a reduced activated carbon (GACr) was obtained by heating the GAC at 1173 K, to remove the oxygenated surface groups. Paracetamol adsorption was higher for GACr due to the lower presence of oxygenated surface functional groups. Moreover, adsorption was highest at neutral pH. The magnitude of the interactions between paracetamol molecules and activated carbons was studied by measuring the immersion enthalpies of activated carbons in solution of paracetamol at different concentrations and pH values and by calculating the interaction enthalpy. The highest value was obtained for GACr in a paracetamol solution of 1000 mg L⁻¹ at pH 7, confirming that paracetamol adsorption is favoured on basic activated carbons at pH values near to neutrality. Finally, the Gibbs energy changes confirmed the latter result, allowing explaining the different magnitudes of the interactions between paracetamol and activated carbons, as a function of solution pH.

Cow bone charcoal (CBC) was synthesized and used for the removal of metals ions (manganese, iron, nickel and copper) from aqueous solutions. Two different adsorption models were used for analyzing the data. Adsorption capacities were determined: copper ions exhibit the greatest adsorption on cow bone charcoal because of their size and pH conditions. Adsorption capacity varies as a function of pH. Adsorption isotherms from aqueous solution of heavy metals on CBC were determined. Adsorption isotherms are consistent with Langmuir´s adsorption model. Adsorbent quantity and immersion enthalpy were studied.

Activated carbon honeycomb-monoliths with different textural properties were prepared by chemical activation of African palm shells with H₃PO₄, ZnCl₂ and CaCl₂ aqueous solutions of various concentrations. The adsorbents obtained were characterized by N₂ adsorption at 77 K, and their carbon dioxide adsorption capacities were measured at 273 K and 1 Bar in volumetric adsorption equipment. The experimental adsorption isotherms were fitted to Langmuir and Tóth models, and a better fit was observed to Tóth equation with a correlation coefficient of 0.999. The maximum experimental values for adsorption capacity at the highest pressure (2.627–5.756 mmol·g⁻¹) are between the calculated data in the two models.

The adsorption of salicylic acid, acetaminophen, and methylparaben (pharmaceutical products derived from phenol) on carbons activated with different surface chemistries was carried out. We evaluated the effect of the physicochemical properties of the adsorbent and adsorbates on the adsorption capacity. A study of the adsorbate–adsorbent interactions via immersion calorimetry in the analytes solutions at different concentrations was included, in addition to the equilibrium data analysis. The results show that the pharmaceutical compounds (2.28–0.71 mmol g⁻¹) have lower adsorption capacities in the activated carbon with the highest content of oxygenated groups (acids), while the activated carbons with amphoteric characteristics increase the capacities of adsorption (2.60–1.38 mmol g⁻¹). This behavior may be associated with the increased affinity between the adsorbent and solvent due to the presence of polar groups, which was corroborated by the high immersion enthalpy value in water (ΔH_immH₂O = −66.6 J g⁻¹). The equilibrium data, adjusted to the Freundlich adsorption model, indicated that the heterogeneous adsorption processes involve immersion enthalpy values between −9.42 and −24.3 J g⁻¹.