Portable spectroscopic instruments are an interesting alternative for in-field and on-line measurements. However, the practical implementation of visible-near infrared (VIS-NIR) portable sensors in the forest sector is challenging due to operation in harsh environmental conditions and natural variability of wood itself. The objective of this work was to use spectroscopic methods as an alternative to visual grading of wood quality. Three portable spectrometers covering visible and near infrared range were used for the detection of selected naturally occurring wood defects, such as knots, decay, resin pockets and reaction wood. Measurements were performed on wooden discs collected during the harvesting process, without any conditioning or sample preparation. Two prototype instruments were developed by integrating commercially available micro-electro-mechanical systems with for-purpose selected lenses and light source. The prototype modules of spectrometers were driven by an Arduino controller. Data were transferred to the PC by USB serial port. Performance of all tested instruments was confronted by two discriminant methods. The best performing was the microNIR instrument, even though the performance of custom prototypes was also satisfactory. This work was an essential part of practical implementation of VIS-NIR spectroscopy for automatic grading of logs directly in the forest. Prototype low-cost spectrometers described here formed the basis for development of a prototype hyperspectral imaging solution tested during harvesting of trees within the frame of a practical demonstration in mountain forests.

The curing of concrete significantly influences the hydration process and its strength development. Inadequate curing leads to a loss of quality and has a negative effect on the durability of the concrete. Usually, the effects are not noticed until years later, when the first damage to the structure occurs because of the poor concrete quality. This paper presents a non-destructive measurement method for the determination of the curing quality of young concrete. Hyperspectral imaging in the near infrared is a contactless method that provides information about material properties in an electromagnetic wavelength range that cannot be seen with the human eye. Laboratory tests were carried out with samples with three different curing types at the age of 1, 7, and 27 days. The results showed that differences in the near infrared spectral signatures can be determined depending on the age of the concrete and the type of curing. The data was classified and analyzed by evaluating the results using k-means clustering. This method showed a high level of reliability for the differentiation between the different curing types and concrete ages. A recommendation for hyperspectral measurement and the evaluation of the curing quality of concrete could be made.

Bark residues from Douglas fir are an abundant resource that is currently used primarily in low-value energy recovery or is landfilled. Bark extractives are rich in diverse compounds like terpenes, fatty acids, phenols, and sugars with potential uses in a variety of high value applications. The study explores the potential of enzymatic hydrolysis to improve phenolic compounds from Douglas fir bark. It also assesses differences in chemical composition among rhytidome, phloem, and comingled bark fractions from an industrial waste pile. Phloem fractions exhibit higher yields of extractives, rhytidome fractions have elevated lignin levels, while the comingled fraction lies between the two except in ash content which was higher than in the separated fractions. Fungal decay tests with Gloeophyllum trabeum and Coniophora puteana on extract treated wood suggest potential for growth inhibition in extracts, about 58–31 % and 30–7% mass loss (in average) respectively, but due to high mass loss at low concentrations an enzymatic modification approach seems crucial for enhanced inhibition. Growth responses in whole-cell fermentation approach display variability depending on the participating microorganisms. Enzymatic hydrolysis with beta-glucosidase improved the antioxidant properties of bark extracts and holds promise for altering the chemical composition and enhancing bioactivity.