Local binary patterns (LBPs) are one of the features which have been used for texture classification. In this paper, a method based on using these features is proposed for fabric defect detection. In the training stage, at first step, LBP operator is applied to an image of defect free fabric, pixel by pixel, and the reference feature vector is computed. Then this image is divided into windows and LBP operator is applied to each of these windows. Based on comparison with the reference feature vector, a suitable threshold for defect free windows is found. In the detection stage, a test image is divided into windows and using the threshold, defective windows can be detected. The proposed method is multiresolution and gray scale invariant and can be used for defect detection in patterned and unpatterned fabrics. Because of its simplicity, online implementation is possible as well.
8 January 2013 in IEEE Transactions on Aerospace and Electronic Systems
The work presented here addresses the problem of detecting a target in a passive bistatic radar (PBR) in the presence of interference signals, including receiver noise, direct signal, multipath/clutter echoes, and interfering targets. To this end, after outlining the model of the detection problem in the surveillance channel as a composite hypothesis test, a generalized likelihood ratio test (GLRT) is derived. Its performance is expressed in the closed forms for both the interference-alone case, the probability of false alarm, and the signal-plus-interference case, the probability of detection. A thorough performance assessment is also given, and the results show the superiority of the proposed detector in detection performance and false alarm regulation, and so the proper cancellation of the direct signal, multipath/clutter echoes, and interfering targets occur.
Considering the important role of the ambiguity function (AF) of a signal regarding the performance of a matched filter bank for the detection of targets and the estimation of their ranges and velocities, the thumbtack shape is assumed to be the desirable shape of the AF and the method of least squares for the synthesis of the AF is introduced. Then, an iterative method for the allocation of a proper phase to the desired AF is proposed to obtain better results. This method is then applied to select the proper codes for the synthesis of pulsed orthogonal frequency-division multiplexing signals. It is also shown how this method can reduce sidelobes, almost uniformly, throughout the entire ambiguity plane. Finally, an efficient algorithm is presented, which modifies the produced codes in order to reach a lower peak-to-average power ratio suitable for transmission.
2 May 2014 in IEEE Transactions on Aerospace and Electronic Systems
FM-based passive bistatic radars (PBRs) exploiting a single broadcasted channel suffer from time-varying detection performance due to the time-varying program content of the transmitted signal as well as the propagation condition of that channel. To circumvent this matter, it is a viable idea to exploit multiple broadcasted channels from a single transmitter for detection. In this case, we formulate the problem of detecting a target in the presence of interference signals such as receiver noise, direct signal, multipath/clutter echoes and interfering targets as a composite hypothesis test. To address this, we derive a multiband uniformly most powerful invariant (UMPI) test as an optimal invariant detector. Closed-form expressions for calculating false alarm probability and detection probability for the target models of Swerling 0 and Swerling 1 are derived. A thorough performance assessment is also given, and the results show the robustness of the proposed multiband detector against the time-varying program content of FM radio channels. In addition to the reliable detection performance, a multiband PBR system offers advantages in terms of combined diversity gain and frequency diversity gain as compared with a single band PBR system. The former happens due to the joint exploitation of multiple broadcasted channels for detection, while the latter occurs when independent returns are received from one target over different frequency channels.
1 October 1998 in IEE Proceedings - Radar, Sonar and Navigation
A detector for the case of a radar target with known Doppler and unknown complex amplitude in coloured noise of unknown covariance has been derived. The detector assumes that the noise is an autoregressive process and estimates the unknown parameters by maximum likelihood estimation for the use in the generalised likelihood ratio test. The asymptotic performance of this detector has been derived and it has been shown that for large data records, this detector is CFAR. By computer simulations it has been shown that for a moderate size of data record, the performance of this detector approaches the asymptotic results.
One of the origins of error in the angle of arrival estimation of a signal is the response of the ground to the reflected waves from the target. In low-height target situations, this phenomenon can be so harrowing that it may result in much more error than thermal noise. In this article, two methods of fixed beam and double null are used as preliminary techniques to overcome the problem of low-altitude target angle estimation, and the optimum weights for beam-forming array radar are proposed. These beam-forming methods enable the radar to estimate the target angle precisely without the exact knowledge of the surface slope, whereas they are robust against diffuse and specular ground reflection components.