Ke Wang

Dr. Ke Wang

School of Engineering, Royal Melbourne Institute of Technology (RMIT University), Melbourne, VIC 3000, Australia

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2023 in Laser & Photonics Reviews
Verified
Journal Article
Open access
XCXiaojun Chen
Xiaojun Chen
JLJiao Lin
Jiao Lin
Ke WangKe Wang
Ke Wang
Recently, silicon‐integrated optical circuits have attracted intensive interests, thanks to the compatibility with the complementary metal‐oxide‐semiconductor (CMOS) technology that enables mass production at low cost. The optical switch is an essential part of optical integrated circuits, with broad applications in optical communications and networks, optical computing, and sensing such as LiDAR. In general, the silicon‐integrated optical switch adopts thermo‐optic or carrier dispersion effect to realize reconfigurable signal routing. However, the use of thermo‐optic effect leads to high power consumption, and the carrier dispersion effect has the disadvantage of small refractive index change. In addition, both effects are non‐latching, and hence, continuous power consumption is required even when switching is not needed. For overcoming these drawbacks, phase‐change materials (PCMs) have been introduced into silicon‐integrated optical switches. In this paper, silicon‐integrated optical switches are classified according to the underlying structure and recent research is reviewed. Recent studies on silicon‐integrated optical switches incorporating PCMs are also reviewed. Furthermore, the pros and cons of different types of integrated optical switches with and without PCMs are compared and discussed.

26 April 2016 in Optics Letters
Verified
Journal Article
Closed access
PDF file
YWYang Wang
Yang Wang
SGShitao Gao
Shitao Gao
Ke WangKe Wang
Ke Wang
ESEfstratios Skafidas
Efstratios Skafidas
A broadband, low-loss and polarization-insensitive 3 dB optical power splitter based on adiabatic tapered silicon waveguides is proposed and investigated. 3D-FDTD simulation results show that the splitter achieves an output transmission efficiency of nearly 50% over an ultra-broad wavelength range from 1200 to 1700 nm. The device is fabricated, and experimental results show that the splitter exhibits a low excess loss of <0.19 dB for the TE polarization and <0.14 dB for the TM polarization over the entire measured wavelength range from 1530 to 1600 nm, while having an adiabatic taper length of only 5 μm. In addition, the measured power uniformity of the cascaded 1×8 splitter is only 0.47 dB, and 0.17 dB for the TE and TM polarizations, respectively. With the advantages of low loss, broad bandwidth, and compact size, the proposed splitter is a promising element for large-scale silicon integrated photonic circuits.

19 October 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Ke WangKe Wang
Ke Wang
TSTingting Song
Tingting Song
YWYitong Wang
Yitong Wang
CFChengwei Fang
Chengwei Fang
JHJiayuan He
Jiayuan He
KSKandeepan Sithamparanathan
Kandeepan Sithamparanathan
The optical wireless communication (OWC) technology explores the broad unregulated optical spectrum to provide high-speed wireless communications, and the visible, ultraviolet and near-infrared wavelength ranges all have been investigated. Compared with the conventional radio frequency (RF) band, the spectrum in OWC systems is much less congested and the interference is much lower. The OWC technology also provides enhanced physical layer security due to the natural confinement of optical beams that makes it difficult to intercept the transmitted signal. Hence, the OWC technology has been widely studied and considered as a promising candidate in future beyond-5G communications. The OWC technology has been considered for both long-range and short-range applications, and in this paper we will introduce the fundamentals and recent developments of short-range OWC systems. In particular, we will focus on the key short-range OWC applications in indoor personal or local area communications, underwater wireless communications, wireless data center networks, and vehicular communications. We will also introduce some recent widely studied advanced techniques to boost the performance of short-range OWC systems, including the spatial domain diversity, multiplexing and modulation principles to improve the system robustness and data rate, and the machine learning algorithms and hardware accelerators to suppress both linear and nonlinear effects to improve OWC signal quality and bit-error-rate performance.

10 February 2011 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
Ke WangKe Wang
Ke Wang
ANAmpalavanapillai Nirmalathas
Ampalavanapillai Nirmalathas
CLChristina Lim
Christina Lim
ESEfstratios Skafidas
Efstratios Skafidas
A novel high-speed optical wireless communication system for indoor personal area networking applications is proposed and studied. A proof-of-concept experiment at 12.5-Gb/s wireless transmission has been successfully demonstrated with limited mobility. When integrated with a WiFi-based localization system, high-speed optical wireless communication with a mobility feature can be achieved over the entire room. The performance trade-offs between the maximum beam footprint and overall bit rate have also been studied and quantified experimentally and the results show that error-free (BER<;10-9) reception can always be achieved for a wide range of bit rates from 1 to 12.5 Gb/s.

1 January 2016 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
Ke WangKe Wang
Ke Wang
ANAmpalavanapillai Nirmalathas
Ampalavanapillai Nirmalathas
CLChristina Lim
Christina Lim
KAKamal Alameh
Kamal Alameh
ESEfstratios Skafidas
Efstratios Skafidas
In this letter, we propose and experimentally demonstrate an indoor optical wireless communication system with over 1-Gb/s data transmission, for both downlink and uplink. A low-cost vertical cavity surface emitting laser with limited modulation bandwidth is used as the uplink light source, and it is directly modulated with the carrierless-amplitudephase (CAP) format; 1 Gb/s (4-CAP), 1.5 Gb/s (8-CAP), and 2 Gb/s (16-CAP) uplink transmissions are achieved and the results demonstrate a receiver sensitivity better than -17 dBm (at a bit error rate of 10 -3 ). In addition, the tradeoff between the bit rate and the system performance in terms of receiver sensitivity and beam coverage area is investigated.

19 May 2011 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Ke WangKe Wang
Ke Wang
ANAmpalavanapillai Nirmalathas
Ampalavanapillai Nirmalathas
CLChristina Lim
Christina Lim
ESEfstratios Skafidas
Efstratios Skafidas
A novel high-speed optical wireless communication system incorporating wavelength division multiplexing technology for indoor personal area networking applications is proposed in this paper. Even with the simplest single wide field-of-view (45°) nonimaging receiver, bit rate as high as 4 × 12.5 Gb/s has been successfully demonstrated by experiments. It is shown that error-free reception (bit error rate <; 10-9) can be achieved over the entire beam footprint of about 1 m, so limited mobility can be provided to subscribers. In addition, a new localization system based on this optical wireless communication system has also been proposed and verified by experiments. When these two systems are incorporated together, high-speed optical wireless communication with mobility feature can be provided to users over the entire room.