One of the most widely used methods for representing the shapes of ships and offshore plants is triangular mesh, which has a simple structure and is easy to visualize. In particular, lightweight models composed of triangular meshes are often used as a sharing medium for three-dimensional (3D) shape design results in the collaboration process among many stakeholders participating in the construction process. Currently, there are demands for visualizing the total shapes of ships or offshore plants for design review, interference check, construction monitoring, and securing maintenance space. However, this requires high computing power and much time due to the large size of the triangular mesh model. We have two general solutions as follows: simplifying the shape of the ship and offshore plant structure and reducing the size of the lightweight file itself. Between them, this study proposes a method for reducing the lightweight file. This method classifies the part types of the ship or offshore plant structure and then only stores the minimum triangular mesh information for each part type, excluding unnecessary information. Then, the topographic information of triangular meshes is stored together in the lightweight file to shorten the time required for restoration of the lightweight file.
The drill floor of an offshore drilling facility is equipped with a collision avoidance system to prevent collisions between moving equipment. In this paper, we present the visualization of the collision avoidance system using the digital twin concept. By classifying the core technologies of the digital twin, the elements necessary for the visualization of the collision avoidance system are derived, and the information for visualization is organized. We conduct 3D visualization of equipment and design IO devices necessary for the visualization. The movement of the floater is considered, and a database is built to efficiently search for the information required for the retrieval of stored 3D information. A collision detection situation is generated by operating the equipment using the input device required for simulation. Collision information is displayed as designed, and it is confirmed that the switching of the display between the present and past time is operating normally. The entire system functions normally as designed, including the input/output with other databases and equipment operation. Implementing a digital twin for an offshore platform is a time-consuming and costly process. It is expected that the improved anti-collision system can be expanded for the digital twin of an entire offshore platform.
Welding is the most expensive process in building ships and offshore plants. Therefore, the quantity of welding material should be calculated for the subsections (cells) of the blocks for efficient work planning, and welding paths must be generated for welding automation. Three-dimensional (3D) computer-aided design (CAD) models have been used for this work. However, relevant information regarding welding is often omitted, and a separate database and interface to this database must be developed. In this study, a method of lightweight model-based weld line generation is proposed, followed by the calculation of bead length for welding material quantity estimation and welding path generation. Experiments were performed on various test cases of curved parts and blocks. The proposed method accurately generated weld lines, calculated bead length, and generated welding paths in a short time of approximately 1 s.
With the advances in technology and the automation of drilling platforms, the Anti-Collision System (ACS) has appeared as an affordable technology, which is intended to keep equipment on the drilling floor working harmoniously and to prevent the potential hazards associated with accidents. However, the specialty of the machinery on the drilling floor requires a distinguished structure for the ACS and a reliable collision-avoidance algorithm, which is not similar to any algorithm in other applications, such as automobiles and robotics. The aim of this paper is to provide a comprehension of the configuration of an ACS in an Integrated Drilling System and to develop a practical anti-collision algorithm that can be applied to the machine arrangement for an offshore drilling operation. By analyzing the motions and using kinematic parameters, such as the speed and deceleration information of drilling equipment, a kinematic collision box algorithm is developed to eliminate the limitation of conventional algorithms. While the conventional collision-avoidance algorithm uses a collision box with fixed size, the kinematic collision box algorithm uses a collision box with a flexible scale that can be correspond to the velocity and deceleration rate of the equipment. Several operating scenarios are simulated by a visual model of ACS to authenticate the functionality of the proposed algorithm. The operation of the top drive is an outstanding scenario. Only 2.25 s are required to stop the top drive from its maximum velocity, and a conventional algorithm uses this number to create a fixed bounding box. Also, the kinematic collision box algorithm uses the real-time data of velocity and acceleration to adjust the scale of the bounding box when the speed of the top drive increases from 0 to its maximum value. The simulation result illustrates the reliability and advances of the kinematic collision box algorithm in performing the collision-avoidance function in ACS compared to the conventional algorithm.
30 June 2020 in Korean Journal of Computational Design and Engineering
Lightweight models are widely used for visualizing and sharing large data in ships and plants. To minimize the file size and increase visibility, this model is mainly composed of triangular elements. Generally, ships and plants are composed of numerous thin metal plates, pipes and beams. These structures contain a large number of identical shapes. In this paper, we propose a method that can exactly determine identical shapes based on a lightweight model. The area and volume are compared for each part. Then, the boundary edges are extracted using triangular elements. The feature points are generated based on edge vertexes, bounding box, principle axis and secondary axis. Finally, the ICP (iterative closest point) is used to determine if thee feature points are in the same position.