The seismic design of structures is crucial for preventing structural collapse and safeguarding human lives. Buckling-restrained braces (BRBs) have emerged as effective seismic protection devices due to their high stiffness, strength, and exceptional energy absorption capabilities. Typically, a conventional BRB consists of a steel core surrounded by concrete-filled steel tubes, with a separation mechanism ensuring axial-only deformation of the core. However, researchers have been increasingly focusing on developing innovative BRB designs with enhanced performance, incorporating different materials and configurations. This paper presents a comprehensive analysis of the development of novel BRBs introduced in the past 15 years. A systematic review approach is adopted, and the selected articles are categorized based on the shapes, materials, and compositions of the BRB components. Although carbon steel has been widely used in numerous studies, its susceptibility to corrosion and its potential impact on the hysteretic behavior of BRBs remain unexplored. Consequently, future research prospects are identified, highlighting the significance of employing anti-corrosive materials in fabricating BRBs to ensure their stable seismic performance under harsh environmental conditions. Investigating novel materials and configurations can lead to the creation of more robust and corrosion-resistant BRBs, thus enhancing the safety and longevity of structures in earthquake-prone areas.

In this study, detailed finite element analysis was conducted to examine the seismic performance of square and circular hollow steel braces under axial cyclic loading. Finite element models of braces were constructed using ABAQUS finite element analysis (FEA) software and validated with experimental results from previous papers to expand the specimen’s matrix. The influences of cross-section shape, slenderness ratio, and width/diameter-to-thickness ratio on hysteretic behavior and compressive-tensile strength degradation were studied. Simulation results of parametric studies show that both square and circular hollow braces have a better cyclic performance with smaller slenderness and width/diameter-to-thickness ratios, and their compressive-tensile resistances ratio significantly decreases from cycle to cycle after the occurrence of the global buckling of braces.

Steel energy dissipation devices are integral to seismic design, as they help reduce structural deformations during strong earthquakes by absorbing and dissipating energy through large inelastic deformations. This research provides new insights into the cyclic behavior and constitutive modeling of carbon steel SS275, a domestically manufactured material in Korea specifically used for seismic energy dissipation applications. To characterize its mechanical response, monotonic and strain-controlled cyclic loading tests are conducted on nine machined coupons. The cyclic tests are performed under constant strain amplitudes ranging from ±0.5% to ±3.0%. Experimental strain–life data obtained at these amplitudes are used to determine the Coffin–Manson parameters, while the cyclic stress–strain relationship is defined using the Ramberg–Osgood equation. Furthermore, material parameters for the Chaboche nonlinear hardening model are extracted from the experimental results and validated through finite element simulations of coupon tests in ABAQUS, ensuring close agreement with the measured cyclic response. Following the coupon-level analysis, a member-scale test is performed on a buckling-restrained brace (BRB) fabricated from SS275 steel. The calibrated Chaboche parameters are then applied in numerical simulations of the BRB, and the results are compared with experimental data to assess the model’s predictive capability for seismic performance.