—Using a Bunsen-type burner in which the name temperature was controlled by nitrogen addition, the tendency of hydrocarbon fuels to form soot has been determined systematically. The effective sooting equivalence ratio reported is based on the stoichiometric relation in which the carbon and hydrogen in the fuel are converted to carbon monoxide and water. respectively, rather than the conventional equivalence ratio or the C/O ratio. The temperature effect is clearly shown by plotting the log of the effective equivalence ratio versus the reciprocal of the (adiabatic) flame temperature, and this dependency is similar for all fuels examined and is relatively weak. At a given flame temperature, an increase in either the number of carbon atoms or the C/H ratio in the fuel molecule increases the tendency to soot. These effects are attributed to the increased pyrolysis rate and the decreased oxidative attack, respectively. No significant effects are found with regard to the structure of the fuel molecule. The sooting tendency at a fixed temperature correlates extremely well with the "number of C-C bonds" or the total C-C bond strength in the molecule.
A stream of free, monodisperse droplets of boron/JP-10 slurries, prepared in the laboratory, was projected downward into a high-temperature, atmospheric-pressure, oxidizing gas stream. High molecular-weight organic dispersing agents were found to be responsible for the violent disruption of the primary slurry droplets burning with an envelope diffusion flame. The time to disruption increased as (1) the concentration of the dispersant was decreased, (2) a dispersant with higher initial pyrolysis temperature was used, and (3) the size of the suspended solid particles in the slurry was increased. The quiescent vapor-phase combustion of unstabilized slurry droplets generated spherical “solid” boron agglomerates, while the disruptive burning of stabilized slurry droplets resulted in quasi-spherical hollow shells along with their fragments. In the light of the combined role of dispersing agents and solid particles in the formation of the agglomerate shells, a physical mechanism of the process leading to disruption is proposed herein. This work clearly demonstrates that the choice of dispersants for slurries not only affects the slurry stabilization but may significantly modify its combustion properties and those of the agglomerates formed.