We present an effective atomic interaction potential for crystalline α-Al2O3 generated by the program potfit. The Wolf direct, pairwise summation method with spherical truncation is used for electrostatic interactions. The polarizability of oxygen atoms is included by use of the Tangney-Scandolo interatomic force field approach. The potential is optimized to reproduce the forces, energies, and stresses in relaxed and strained configurations as well as {0001}, $\lbrace 10\overline{1}0\rbrace${101¯0}, and $\lbrace 11\overline{2}0\rbrace${112¯0} surfaces of Al2O3. Details of the force field generation are given, and its validation is demonstrated. We apply the developed potential to investigate crack propagation in α-Al2O3 single crystals.
The adhesion properties of the TiAl/TiO2 interface are estimated in dependence on interfacial layer composition and contact configuration using the projector augmented wave method. It is shown that a higher value of the work of separation is obtained at the interface between the Ti-terminated TiAl(110) surface and the TiO2(110)O one than at that with the Al-terminated alloy. An analysis of structural and electronic factors dominating the chemical bonding at the interfaces is carried out. It is shown that low bond densities are responsible for low adhesion at both considered interfaces, which may affect the spallation of oxide scale from the TiAl matrix.
Ab initio calculations using plane wave pseudopotential method within density funtional theory are applied to investigate mechanical and electronic properties of Al-terminated Me(1 1 1)/Al2O3(0 0 0 1) (Me = Al, Ag, Cu, Nb) interfaces. Stress–displacement relationships of separation perpendicular to the interface are calculated. It is shown that obtained results such as work of separation and tensile strength can be understood from electronic structure.