In this paper, the wave propagation in phononic crystal composed of auxetic star-shaped honeycomb matrix with negative Poisson’s ratio is presented. Two types of inclusions with circular and rectangular cross sections are considered and the band structures of the phononic crystals are also obtained by the finite element method. The band structure of the phononic crystal is affected significantly by the auxeticity of the star-shaped honeycomb. Some other interesting findings are also presented, such as the negative refraction and the self-collimation. The present study demonstrates the potential applications of the star-shaped honeycomb in phononic crystals, such as vibration isolation and the elastic waveguide.
15 October 2018 in IEEE/ASME Transactions on Mechatronics
In this paper, a press-button type piezoelectric energy harvester (PEH) is presented. The proposed device is composed of a piezoelectric bender, four magnets, a button, and a reverted spring. The proposed structure is triggered by an impact driven by magnetic force, so this novel trigger mechanism enhances its optimal power output. Based on the piezoelectricity, beam theory and the vibration theory, a complete numerical model was developed to simulate and predict the output voltage. A prototype was fabricated for verification, and the characterization of the energy harvester was measured. The harvested power and energy by a single impact was recorded as 20 mW and 190 μJ, respectively, at an optimum resistive load of 30 kΩ. The measured data agreed with the results of numerical model. Finally, the piezoelectric energy charger extractor (PECE) was used to store the harvested energy. The energy stored in a capacitor of 1 μF was 42.1 μJ.
In this paper, a Lamb-wave based structural health monitoring for multi-damage localizations in large composite plates is presented. The Lamb waves are generated and received by piezoelectric transducers, which are arranged in array on the composite plate. In the experiments, three composite plates with various laminate stacking sequences and taper designs were prepared. The damages were created on the specimens by impact testing. In each specimen, 24 piezoelectric transducers were utilized and mounted on the specimen surface. This study proposed an algorithm to identify the damage localizations. The transducer layout is classified by 10 subsets. In each subset, the wave propagation paths can be grouped into path groups pivoted by actuators and that by sensors. Based on the damage index, the mean angle line for each path group in a subset can be obtained. By assuming that the mean angle line passes through the actual damage, the damage localization can be achieved if there exist more than two mean angle lines in one subset. In this study, two exclusion rules are proposed to exclude a path group from the damage localization calculations. The damage localization results show that, for a composite plate with multiple damages, their locations can be identified by using multiple subsets. The damage localization results show that the damage location can be accurately predicted for the case that a damage exists in the interior of a subset. The experiment results also show that the Lamb wave characteristics and the localization results are not affected by the thickness variation of the plate, indicating that the proposed algorithm is available for tapered composite plate.