A dielectric pipe waveguide is successfully demonstrated as a terahertz refractive index sensor for powder and liquid-vapor sensing. Without additional engineered structures, a simple pipe waveguide can act as a terahertz resonator based on anti-resonant reflecting guidance, forming multiple resonant transmission-dips. Loading various powders in the ring-cladding or inserting different vapors into the hollow core of the pipe waveguide leads to a significant shift of resonant frequency, and the spectral shift is related to the refractive-index change. The proven detection limit of molecular density could be reduced to 1.6nano-mole/mm3 and the highest sensitivity is demonstrated at around 22.2GHz/refractive-index-unit (RIU), which is comparable to the best THz molecular sensor [Appl. Phys. Lett. 95, 171113 (2009)].
The suitability of a terahertz plasmonic sensor for sensing applications is successfully demonstrated using a hybrid planar waveguide composed of a subwavelength plastic ribbon waveguide and a diffraction metal grating. The subwavelength-confined terahertz plasmons on the hybrid waveguide resonantly reflect from the periodic metal structure under phase-matched conditions and perform resonant transmission dips. The resonant plasmonic frequencies are found to be strongly dependent on the refractive indices and thicknesses of analytes laid on the hybrid planar waveguide. Both plastic films with varying thicknesses and granular analytes in different quantities are successfully identified according to the spectral shifts of resonant dips. An optimal refractive index sensitivity of 261 GHz per refractive index unit is achieved. Within localized and enhanced terahertz plasmonic fields, the minimum detectable optical path difference can be reduced to 2.7 μm corresponding to λ/289, and the minimum detectable amount of analytes in powdered form reaches 17.3 nano-mole/mm2. The sensing technique can be used to detect particles in a chemical reaction or monitor pollutants.
A simple dielectric hollow-tube has been experimentally demonstrated at terahertz range for bio-molecular layer sensing based on the anti-resonant reflecting wave-guidance mechanism. We experimentally study the dependence of thin-film detection sensitivity on the optical geometrical parameters of tubes, different thicknesses and tube wall refractive indices, and on different resonant frequencies. A polypropylene hollow-tube with optimized sensitivity of 0.003mm/μm is used to sense a subwavelength-thick (λ/225) carboxypolymethylene molecular overlayer on the tube’s inner surface, and the minimum detectable quantity of molecules could be down to 1.22picomole/mm2. A double-layered Fabry-Pérot model is proposed for calculating the overlayer thicknesses, which agrees well with the experimental results.
The feasibility of remote chemical detection is experimentally demonstrated by using a Teflon pipe as a scanning arm in a continuous-terahertz wave sensing and imaging system. Different tablets with distinct mixed ratios of aluminum and polyethylene powders are well distinguished by measuring the power reflectivities of 0.4 THz wave associated with their distinct terahertz refractive indices. Given its refractive index sensitivity and fast response, the reflective terahertz sensing system can be used to real-time trace and quantitatively analyze the ammonium–chloride aerosols produced by the chemical reaction between hydrochloric acid and ammonia vapors. With a tightly focusing terahertz beam spot, the spatial and concentration distributions of the generated chemical product are successfully mapped out by the 1D scan of the flexible pipe probe. In consideration of the responsitivity, power stability, and focused spot size of the system, its detection limit for the ammonium–chloride aerosol is estimated to be approximately 165 nmol/mm2. The reliable and compact terahertz pipe scan system is potentially suitable for practical applications, such as biomedical or industrial fiber endoscopy.
A high-aspect-ratio metallic rod array is demonstrated to generate and propagate highly confined terahertz (THz) surface plasmonic waves under end-fire excitation. The transverse modal power distribution and spectral properties of the bound THz plasmonic wave are characterized in two metallic rod arrays with different periods and in two configurations with and without attaching a subwavelength superstrate. The integrated metallic rod array–based waveguide can be used to sense the various thin films deposited on the polypropylene superstrate based on the phase-sensitive mechanism. The sensor exhibits different phase detection sensitivities depending on the modal power immersed in the air gaps between the metallic rods. Deep-subwavelength SiO2 and ZnO nanofilms with an optical path difference of 252 nm, which is equivalent to λ/3968 at 0.300 THz, are used as analytes to test the integrated plasmonic waveguide. Analysis of the refractive index and thickness of molecular membranes indicates that the metallic rod array–based THz waveguide can integrate various biochip platforms for minute molecular detection, which is extremely less than the coherent length of THz waves.
A multilayered water–skin model is used to experimentally verify a new sensing method for determining the skin penetration depth of radiation with 0.1–0.9 terahertz (THz) frequencies. A water overlayer is dripped on a skin sample to form a multilayered structure for dynamically measuring the reflected THz-wave amplitude during water desorption. Skin penetration depths can be successfully derived by using the multilayered water–skin model and by considering the measured reflectivity, water dielectric constants, and effective thicknesses of the water overlayer on the skin sample. The maximum penetration depth is approximately 0.3 mm and is obtained with wave frequencies of 0.4–0.6 THz. This penetration depth encompasses the stratum corneum (SC) and part of the epidermis. The high penetration depth of 0.4–0.6 THz waves is also confirmed in the dried and damaged SC.