Rapid growth and the urban development of Chinese megacity in recent decades have led to land utilization challenges and the need for over-track buildings above metro depots that are part of the subway systems in these cities. Frequent subway operations into and out of the depots, which generate excessive vibration that transmits into the over-track buildings, can have adverse effects on the buildings’ occupants in terms of feelable vibration and noise. An efficient modeling procedure is presented for estimating vibration levels within the buildings before construction to determine whether vibration mitigation is required. Models were developed and validated based on vibration measurements in low-rise and high-rise buildings over a metro depot in Shenzhen, China. Impedance models were developed that characterize vibration transmission through the primary support columns or load-bearing walls into the building floors. Inputs to the model are vibration levels at the buildings’ foundation where the model estimates the transmission through individual support structures to the upper floors. Vibration estimates at different elevations within the building were compared with the measured levels during train pass-bys under the buildings with good agreement. Based on axial wave transmission impedances for column or load-bearing wall segments and simple impedance expressions for building floors, the closed-form analytical impedance model is an efficient and cost-effective tool for estimating floor vibration before construction.

Constructing buildings above subway tracks exploits urban-area space intensively by adopting the three-dimensional overlapping development mode, which is one of the important measures for solving the contradictions among urban population increase, land resource shortage, and environmental protection. However, the vibration generated by the frequent train operations is transmitted to the upper buildings through the track structure and ground soil, which can cause structural vibrations and radiated noise and bring physical and mental side effects to occupants within the buildings. Subway projects are often located in geologically sensitive areas, while the influences of the encountered geological problems on the generation and propagation of structural vibration and structure-radiated noise within the buildings are not yet clear. Hence, this paper presents a method of studying the train-induced vibration transmission from the ground up into the buildings and the structure-radiated noise within the building. The method consists of a train-track model, track-soil-building model, and structure-radiated noise simulation. The impact of soil properties on the building vibration and structure-radiated noise is analyzed and ground-improvement measures are proposed in order to mitigate vibration and structure-radiated noise within buildings. The results show that the interaction between soil and structure has a great impact on vibration transmission from the ground into the building. Good foundations reduce vibration transmission from ground soil up into the building and lead to a lower level of structure-radiated noise. Ground improvements increase the impedance of ground soil, thereby weakening the vibration transmission and lowering the structure-radiated noise.

Train-induced feelable vibrations can bring side effects to people living or working in the building, as well as to operation of precise equipment. As massive construction of over-track buildings above metro depots prevails in megacities, impacts from train-induced feelable vibration take more concern. Four standard-designed 4-story steel-framed offices above the throat area in the Qianhai metro depot in Shenzhen, China, are studied in this research. The field measurements were conducted to investigate the influences of track alignment and track location in the throat area on vibration responses of over-track buildings. Detailed vibration analyses using the finite element method have been conducted. Train-induced floor vibration assessments on human comfort are carried out based on a total of 54 train pass-bys operated in the morning and evening and on different tracks. It can be found that the track alignment primarily affected the higher frequency components of train-induced vibrations, where curved trackinduced vibrations have larger amplitudes. The variance of train-induced building vibrations among pass-bys on different track locations was reduced compared with that of ground vibrations because of the averaging effects caused by multiple transmitting paths within the massive platform and stiff transfer structures. Train-induced acceleration levels at mid-floor can be 20–25 dB larger than those near columns at floor resonance frequencies which are dependent on the structural design. This research gives a comprehensive insight into train-induced vibrations within low-rise steel-framed buildings above the throat area in the metro depot, which is a valuable reference for assessments before the construction of future similar over-track communities.