A light pen coordinate measuring system (LPCMS) is a kind of vision-based portable coordinate measuring technique. It implements coordinate measurement by analyzing the image of a light pen, which has several control points and a probe. The relative positions of control points need to be determined before measurement and serve as the measuring basis in LPCMS. How to accurately calibrate the relative positions of control points is the most important issue in system calibration. In this paper, a new method of control point position calibration based on a traditional coordinate measuring machine (CMM) is proposed. A light pen is fastened to the measuring arm of a CMM and performs accurate translational movement driven by the CMM. A camera is used to capture the images of control points at different positions, and the corresponding readings of the CMM are recorded at the same time. By establishing a separate coordinate system for each control point, the relative positions of the control points can be transformed to the differences of a series of translation vectors. Experiments show that the calibration repeatability of control point positions can reach 10 μm and the standard deviation of measurement of the whole LPCMS can reach 30 μm. A CMM is used to generate accurate translation, which provides a high accuracy basis of calibration. Through certain mathematical treatment, tremendous data acquired by moving the light pen to tens of thousands of different positions can be processed in a simple way, which can reduce the influence of random error. Therefore, the proposed method provides a high-accuracy solution of control point position calibration for LPCMS.
Light pen coordinate measuring system is a kind of vision-based portable coordinate measuring technique. It implements coordinate measuring by analyzing the image of light pen, which has several control points. With the relative positons of the control points determined and the pixel coordinates of their image points acquired by image processing, the posture of light pen can be obtained by solving perspective- n-point problem. Therefore, the control point positons serve as the measuring basis of the whole system. However, the accuracy of existing calibration methods is not satisfactory. In this paper, a new method of control point positon calibration, which utilizes traditional coordinate measuring machine, is proposed. The light pen is fasten to the measuring arm of a coordinate measuring machine and moves along a three dimensional grid route driven by the machine. A stationary camera is located in front of the machine to capture the image of light pen at each node of the route. For each control point, an individual coordinate system is established. Then the relative positions of control points can be transformed into the differences of a series of translation vectors. Experiments show that, with the proposed method, the accuracy of light pen coordinate measuring system can reach 30m within 10 meters.