Syed Zohaib Javaid Zaidi

Dr. Syed Zohaib Javaid Zaidi


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 October 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HIHumaira Idrees
Humaira Idrees
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
ASAneela Sabir
Aneela Sabir
RKRafi Ullah Khan
Rafi Ullah Khan
XZXunli Zhang
Xunli Zhang
SHSammer Ul Hassan
Sammer Ul Hassan
Biodegradable natural polymers have been investigated extensively as the best choice for encapsulation and delivery of drugs. The research has attracted remarkable attention in the pharmaceutical industry. The shortcomings of conventional dosage systems, along with modified and targeted drug delivery methods, are addressed by using polymers with improved bioavailability, biocompatibility, and lower toxicity. Therefore, nanomedicines are now considered to be an innovative type of medication. This review critically examines the use of natural biodegradable polymers and their drug delivery systems for local or targeted and controlled/sustained drug release against fatal diseases.

15 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BMBilal Mughal
Bilal Mughal
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
XZXunli Zhang
Xunli Zhang
SHSammer Ul Hassan
Sammer Ul Hassan
Nanotechnology plays a big part in our modern daily lives, ranging from the biomedical sector to the energy sector. There are different physicochemical and biological methods to synthesise nanoparticles towards multiple applications. Biogenic production of nanoparticles through the utilisation of microorganisms provides great advantages over other techniques and is increasingly being explored. This review examines the process of the biogenic synthesis of nanoparticles mediated by microorganisms such as bacteria, fungi and algae, and their applications. Microorganisms offer a disparate environment for nanoparticle synthesis. Optimum production and minimum time to obtain the desired size and shape, to improve the stability of nanoparticles and to optimise specific microorganisms for specific applications are the challenges to address, however. Numerous applications of biogenic nanoparticles in medicine, environment, drug delivery and biochemical sensors are discussed.

22 July 2020 in Diagnostics
Verified
Journal Article
Open access
PDF file
SHSammer Ul Hassan
Sammer Ul Hassan
ATAamira Tariq
Aamira Tariq
ZNZobia Noreen
Zobia Noreen
ADAhmed Donia
Ahmed Donia
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
XZXunli Zhang
Xunli Zhang
Point-of-care (POC) or near-patient testing allows clinicians to accurately achieve real-time diagnostic results performed at or near to the patient site. The outlook of POC devices is to provide quicker analyses that can lead to well-informed clinical decisions and hence improve the health of patients at the point-of-need. Microfluidics plays an important role in the development of POC devices. However, requirements of handling expertise, pumping systems and complex fluidic controls make the technology unaffordable to the current healthcare systems in the world. In recent years, capillary-driven flow microfluidics has emerged as an attractive microfluidic-based technology to overcome these limitations by offering robust, cost-effective and simple-to-operate devices. The internal wall of the microchannels can be pre-coated with reagents, and by merely dipping the device into the patient sample, the sample can be loaded into the microchannel driven by capillary forces and can be detected via handheld or smartphone-based detectors. The capabilities of capillary-driven flow devices have not been fully exploited in developing POC diagnostics, especially for antimicrobial resistance studies in clinical settings. The purpose of this review is to open up this field of microfluidics to the ever-expanding microfluidic-based scientific community.

19 January 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
HIH. Idress
H. Idress
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
ASA. Sabir
A. Sabir
MSM. Shafiq
M. Shafiq
RKR. U. Khan
R. U. Khan
FWF. C. Walsh
F. C. Walsh
This study investigates the removal of Pb(II) using polymer matrix membranes, cellulose acetate/vinyl triethoxysilane modified graphene oxide and gum Arabic (GuA) membranes. These complexation-NF membranes were successfully synthesized via dissolution casting method for better transport phenomenon. The varied concentrations of GuA were induced in the polymer matrix membrane. The prepared membranes M-GuA2–M-GuA10 were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscope and bio-fouling studies. Thermal stability of the membranes was determined by thermogravimetric analysis under nitrogen atmosphere. Dead end nanofiltration was carried out to study the perm- selectivity of all the membranes under varied pressure and concentration of Pb(NO3)2. The complexation-NF membrane performances were significantly improved after the addition of GuA in the polymer matrix membrane system. M-GuA8 membrane showed optimum result of permeation flux 8.6 l m−2 h−1. Rejection of Pb(II) ions was observed to be around 97.6% at pH 9 for all the membranes due to electrostatic interaction between CA and Gum Arabic. Moreover, with the passage of time, the rate of adsorption was also increased up to 15.7 mg g−1 until steady state was attained. Gum Arabic modified CA membranes can open up new possibilities in enhancing the permeability, hydrophilicity and anti-fouling properties.

5 December 2020 in International Journal of Environmental Science and Technology
Verified
Journal Article
Open access
PDF file
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
ASA. Shafeeq
A. Shafeeq
MSM. Sajjad
M. Sajjad
SHSammer Ul Hassan
Sammer Ul Hassan
MAM. S. Aslam
M. S. Aslam
FWF. C. Walsh
F. C. Walsh
The present study reports the characterization of reverse osmosis (RO) technology at water treatment plant Cogen-2 in paper and Board mills, Pakistan. RO is a commonly used process to obtain de-mineralized water for high-pressure boiler operation in thermal power plants. Scaling and fouling in three-stage RO plants is a major challenge in chemical industry due to the use of raw brackish water in the power plant of paper and board mills. In our study, the feed water quality of RO was changed from soft water to raw water to make it economical. The cleaning frequency was increased three times than normal, which was unsafe for operation and it was required to control scaling and fouling to achieve the desired result. Differential pressures behavior of all stages for 2-month data was observed without acid treatment, and the results of Langelier Saturation Index (LSI) control parameters (temperature, pH, total dissolved solids, calcium hardness, and alkalinity) clearly showed the abnormality. To optimize scaling and fouling of RO, the LSI factor was controlled in total reject water for the next 2 months by acid treatment in feed water. Duration of chemical cleaning and membranes’ life has been extended by fouling and scaling control. Understanding the effect of operational parameters in RO membranes is essential in water process engineering due to its broad applications in drinking water, sanitation, seawater, desalination process, wastewater treatment, and boiler feed water operation. The product flow increased from 18.3 to 19.9 m3/h, and this was due to a decrease in the rejection flow from 8.2 to 6.7 m3/h. The total reject stream pressure also increased from 8.1 to 9 bar. A lower value of LSI of 1.6 is obtained in the reject water stream after the acid treatment.

4 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MSM. U. Shakeel
M. U. Shakeel
SZSyed Zohaib Javaid Zaidi
Syed Zohaib Javaid Zaidi
AAA. Ahmad
A. Ahmad
AAA. A.M. Abahussain
A. A.M. Abahussain
MNMian Hammad Nazir
Mian Hammad Nazir
This article presents a comprehensive benchmarking analysis of merit performance factors in the Effluent Treatment Plants (ETP) of the textile industry. The study aims to identify and evaluate key factors that contribute to the efficient operation and performance of ETPs. The performance of ETP was analyzed by valuable data gained from figures of PH, Dissolved oxygen, Dissolved solids, Suspended solids, Density, COD and BOD. The technical trends showed the deviations in the working conditions of Effluent Treatment Plant by variation in temperature. This variation is achieved by varying the settling time of wastewater in the sedimentation tank during the working process. The required dosing, plant efficiency and economic factors were taken into account. The Plant efficiency was determined to be 83.5% at normal conditions of water entering at temperature of 30°C and pressure of 1 atm along with addition of coagulants and flocculants in the wastewater. While the efficiency of the ETP plant was calculated about 88% using a Compact photometer at elevated conditions of temperature such as > 45°C, while at other temperatures the efficiency decreases significantly due to several reasons. The operating time of water treatment was decreased due to the variations in temperature of wastewater while other conditions kept constant like pressure, flow rates of water and chemicals (Polyacrylamide and Polymeric Ferric Sulfate). The usage of coagulants and flocculants at optimum conditions has been discussed in this study.