Over the past 9,150 years, at least 9 flank collapses have been identified in the history of La Soufrière of Guadeloupe volcano. On account of the volcano’s current unrest, the possibility of such a flank collapse should not be dismissed in assessing hazards for future eruptive magmatic as well as non-magmatic scenarios. We combine morphological and geophysical data to identify seven unstable structures (volumes ranging from 1 × 106 m3 to 100 × 106 m3), including one that has a volume compatible with the last recorded flank collapse in 1530 CE. We model their dynamics and emplacement with the SHALTOP numerical model and a simple Coulomb friction law. The best-fit friction coefficient to reproduce the 1530 CE event is tan(7°) = 0.13, suggesting the transformation of the debris avalanche into a debris flow, which is confirmed by the texture of mapped deposits. Various friction angles are tested to investigate less water-rich and less mobile avalanches. The most densely populated areas of Saint-Claude and Basse-Terre, and an area of Gourbeyre south of the Palmiste ridge, are primarily exposed in the case of the more voluminous and mobile flank collapse scenarios considered. However, topography has a prominent role in controlling flow dynamics, with barrier effects and multiple channels. Classical mobility indicators, such as the Heim’s ratio, are thus not adequate for a comprehensive hazard analysis.
A key point of landslide hazard assessment is the estimation of their runout. Empirical relations linking angle of reach to volume can be used relatively easily, but they are generally associated with large uncertainties as they do not consider the topographic specificity of a given study site. On the contrary, numerical simulations provide more detailed results on the deposits morphology, but their rheological parameters can be difficult to constrain. Simulating all possible values can be time consuming and incompatible with operational requirements of rapid estimations. We propose and compare three operational methods to derive scaling power laws relating the landslide travel distance to the destabilized volume. The first one relies only on empirical relations, the second one on numerical simulations with back-analysis, and the third one combines both approaches. Their efficiency is tested on three case studies: the Samperre cliff collapses in Martinique, Lesser Antilles (0.5 to m), the Frank Slide rock avalanche ( m) and the Samperre cliff collapses in Martinique, Lesser Antilles (0.5 to m) the Fei Tsui debris slide in Hong Kong ( m). Purely numerical estimations yield the smallest uncertainty, but the uncertainty on rheological parameters is difficult to quantify. Combining numerical and empirical approaches allows to reduce the uncertainty of estimation by up to 50%, in comparison to purely empirical estimations. However, it may also induces a bias in the estimation, though observations always lie in the 95% prediction intervals. We also show that empirical estimations fail to model properly the dependence between volume and travel distance, particularly for small landslides (<20,000 m).
20 April 2021 in Journal of Geophysical Research: Earth Surface
Depth‐averaged thin‐layer models are commonly used to model rapid gravity‐driven flows such as debris flows or debris avalanches. However, the formal derivation of thin‐layer equations for general topographies is not straightforward. The curvature of the topography results in a force that maintains the velocity tangent to the topography. Another curvature term appears in the bottom friction force with frictional rheologies. In this work, we present the main lines of the mathematical derivation for these curvature terms that are proportional to the square velocity. With the SHALTOP numerical model, we quantify their influence on flow dynamics and deposits over synthetic and real topographies. This is done by comparing simulations in which these terms are exact, disregarded or approximated. With the Coulomb rheology, for slopes θ = 10 and for friction coefficients below μ = tan (5°), neglecting the curvature force increases the simulated travel times by up to 10% and 30%, for synthetic and real topographies respectively. When the curvature in the friction force is neglected, the travel distance may be increased by several hundred meters on real topographies, whatever the topography slopes and friction coefficients. We observe similar effects on a synthetic channel with slope θ = 25° and μ = 15°, with a 50% increase of the kinetic energy. Finally, approximations of curvature in the friction force can break the noninvariance of the equations and decelerate the flow. With the Voellmy rheology, these discrepancies are less significant. Curvature effects can thus have significant impact for model calibration and for overflows prediction, both being critical for hazard assessment.
SUMMARY: We investigate the dynamics and deposits of granular flows and the amplitude of landslide-generated water waves using the HySEA depth-averaged shallow-water numerical model, both at laboratory and field scales. We evaluate the different sources of error by quantitatively comparing the simulations with (i) new laboratory experiments of granular collapses in different conditions (dry, immersed, dry flow entering water) and slope angles and (ii) numerical simulations made with the SHALTOP code that describes topography effects better than most depth-averaged landslide-tsunami models. For laboratory configurations, representing the limits of the shallow-water approximation in such models, we show that topography and non-hydrostatic effects are crucial. When topography effects are accounted for empirically—by artificially increasing the friction coefficient and performing non-hydrostatic simulations—the model is able to reproduce the granular mass deposit and the waves recorded at gauges located at a distance of more than two to three times the characteristic dimension of the slide with an error ranging from 1 to 25 per cent depending on the scenario, without any further calibration. Taking into account this error estimate, we simulate landslides that occurred on Montagne Pelée volcano, Martinique, Lesser Antilles as well as the generated waves. Multiple collapse simulations support the assumption that large flank collapses on Montagne Pelée likely occurred in several successive subevents. This result has a strong impact on the amplitude of the generated waves and thus on the associated hazards. In the context of the ongoing seismic volcanic unrest at Montagne Pelée volcano, we calculate the debris avalanche and associated tsunamis for two potential flank-collapse scenarios.
Since May 2018, Mayotte Island has been experiencing seismo-volcanic activities that could trigger submarine landslides and, in turn, tsunamis. To address these hazards, we use the HySEA numerical model to simulate granular flow dynamics and the Boussinesq FUNWAVE-TVD numerical model to simulate wave propagation and subsequent inundations. We investigate 8 landslide scenarios (volumes from to ). The scenario posing the greatest threat involves destabilization on the eastern side of Mayotte’s lagoon at a shallow depth and can generate sea-surface deformations of up to 2 m. We show that the barrier reef surrounding Mayotte plays a prominent role in controlling water-wave propagation and in protecting the island. The tsunami travel time to the coast is very short (a few minutes) and the tsunami is not necessarily preceded by a sea withdrawal. Our simulation results provide a key to establishing hazard maps and evacuation plans and improving early-warning systems.