We are considering the problem of reconstructing indoor temperature distributions using the Acoustic travel-time TOMography (ATOM) technique. Motivated by the benefits of acoustic rooms, we reconstruct the field from the estimated time-of-flight (TOF) of the early reflections, considering the first, second, and third orders. Here, TOF collected from early reflections is used as an input dataset to reconstruct indoor air temperature using the simultaneous iterative reconstruction technique (SIRT). Results showed that even with only one loudspeaker and one microphone, we obtain promising reconstruction fields. However, in order to control the semiconvergence of the SIRT algorithm, several examples of reconstructed fields are provided to highlight the effects of linkage between voxels (so-called weighting factor $w$ ), relaxation parameter ( $\lambda $ ), and the number of iterations ( $M$ ). Based on the findings, we suggest the optimal values of $w$ , $\lambda $ , and $M$ , which assist in improving the quality of the reconstructed field. On the other hand, obtaining high-quality indoor field measurements is deeply related to the coordinates of the transceiver, highlighting the need for an optimal position choice. In this context, we propose an improved version of an existing numerical method for predicting the optimal coordinates and reconstructing a highly accurate temperature within an echoic box ( $1.33\times 1.0\times1.27$ m). We show that the predicted optimal position successfully recovers a highly accurate field, satisfying the negative temperature coefficient (NTC)-thermistors measurement.
15 June 2022 in Mathematical Methods in the Applied Sciences
Computational ultrasound imaging has become a powerful tool in technical and medical applications. It enables visualization through complex scattering media such as skull bone or engineered waveguides. In this context, waveguides for ultrasound imaging in hot melts are necessary to shield the transducers from the hot environment. Published works on the topic of ultrasonic testing usually deal with single-mode waveguides. These waveguides support only a single mode within the submerged environment; therefore, an imaging can only be performed by time consuming point-by-point mechanical scanning. Instead of single-mode waveguide, multimode waveguide supports several modes and was proposed for real-time ultrasound imaging without the need for 2D or 3D scanning. Meanwhile, the use of multimode waveguide presents several challenges such as the modal dispersion that distorts wavefronts and scrambles the spatial information, for which additional signal processing schemes are necessary to compensate for them. The goal of the present work is to create an optimization model for the multimode waveguide-based ultrasound imaging in hot melts. This model allows for a trade-off between the number of reflected signals returned from the scatterer, attenuation of waves and the desired bulk wave types, which is governed by the selected depth between the bottom surface of the waveguide and the scatterer position. Therefore, the optimal depth will always depend on the respective fluid-waveguide combination. First, we compute and visualize the paths that return from different positions of the scatterer immersed in the hot melts using a numerical method. Second, the optimal angles of the guided modes in the waveguide are calculated based on the ordinary differential equation (ODE) method and Snell-Descartes law. Accordingly, the guided and bulk waves propagating within the waveguide can be distinguished, where a classification into six types of signals is introduced. Experimental results carried out confirm the feasibility of the proposed optimization model, which achieves a trade-off between the number of reflected signals returned from the scatterer, attenuation of waves and the desired bulk wave types to maintain a reasonable SNR value. The present measurement system achieves 0.27 mm axial resolution and 25 ms temporal resolution. The unique advantage of the present physics model of multimode waveguide-based ultrasound imaging is its ability to improve SNR, as well as can be transferred to several applications such as skull bone imaging in the medical field, where ultrasound imaging of the brain is obstructed by the aberrating skull bone, as well as in energy applications.
Urban soundscapes are complex due to the interaction of different sound sources and the influence of structures on sound propagation. Moreover, the dynamic nature of sounds over time and space adds to this complexity. Virtual reality (VR) has emerged as a powerful tool to simulate acoustic and visual environments, offering users an immersive sense of presence in controlled settings. This technology facilitates more accurate and predictive assessment of urban environments. It serves as a flexible tool for exploring, analyzing, and interpreting them under repeatable conditions. This study presents a systematic literature review focusing on research that integrates VR technology for the audiovisual reconstruction of urban environments. This topic remains relatively underrepresented in the existing literature. A total of 69 peer-reviewed studies were analyzed in this systematic review. The studies were classified according to research goals, selected urban environments, VR technologies used, technical equipment, and experimental setups. In this study, the relationship between the tools used in urban VR representations is examined, and experimental setups are discussed from both technical and perceptual perspectives. This paper highlights existing challenges and opportunities in using VR to assess soundscapes and offers practical insights for future applications of VR in urban environments.