Kyunghwan Yoon

Prof. Dr. Kyunghwan Yoon

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2022 in Polymers
Verified
Journal Article
Open access
PDF file
EJEuichul Jeong
Euichul Jeong
YKYongdae Kim
Yongdae Kim
SHSung-kil Hong
Sung-kil Hong
KYKyunghwan Yoon
Kyunghwan Yoon
SLSunghee Lee
Sunghee Lee
Woven fabric reinforced thermoplastic composites have been gaining significant attention as a lightweight alternative to metal in various industrial fields owing to their high stiffness and strength. Conventional manufacturing processes of woven fabric reinforced thermoplastic composites can be divided into two steps: first, the manufacturing of intermediate material, known as prepreg; then, the formation of the final products from the prepregs. This two-step process increases the manufacturing cost and time of the final composite products. This study demonstrated that woven fabric reinforced thermoplastic composites could be fabricated by an innovative injection molding process instead of the two-step process. A structure placing an extra mesh, which is a new and key component, on the mold-side of woven fabric was devised so that the thermoplastic matrix could be impregnated up to the surface of the woven fabric during injection molding. Tensile tests were performed in the direction parallel to the yarns of the fabric on the injection-molded composites to confirm their mechanical properties. As a result, it was possible to fabricate woven fabric reinforced thermoplastic composites with increased mechanical properties using injection molding without prepreg, and the composites could be molded with a much shorter cycle time than the conventional process, such as thermoforming or over-molding process.

23 April 2022 in Polymers
Verified
Journal Article
Open access
PDF file
JLJunhan Lee
Junhan Lee
DYDongcheol Yang
Dongcheol Yang
KYKyunghwan Yoon
Kyunghwan Yoon
JKJongsun Kim
Jongsun Kim
Artificial neural network (ANN) is a representative technique for identifying relationships that contain complex nonlinearities. However, few studies have analyzed the ANN’s ability to represent nonlinear or linear relationships between input and output parameters in injection molding. The melt temperature, mold temperature, injection speed, packing pressure, packing time, and cooling time were chosen as input parameters, and the mass, diameter, and height of the injection molded product as output parameters to construct an ANN model and its prediction performance was compared with those of linear regression and second-order polynomial regression. Following the preliminary experiment results, the learning data sets were divided into two groups, i.e., one showed linear relation between the mass of the final product and the range of packing time (linear relation group), and the other showed clear nonlinear relation (nonlinear relation group). The predicted results of ANN were relatively better than those of linear regression and second-order polynomial for both linear and nonlinear relation groups in our specific data sets of the present study.

22 November 2015 in Korea-Australia Rheology Journal
Verified
Journal Article
Closed access
PDF file
SHSeokkwan Hong
Seokkwan Hong
JHJeongho Hwang
Jeongho Hwang
JKJeongjin Kang
Jeongjin Kang
KYKyunghwan Yoon
Kyunghwan Yoon

1 August 2003 in Electrophoresis
Verified
Journal Article
Closed access
PDF file
TMTohei Moritani
Tohei Moritani
KYKyunghwan Yoon
Kyunghwan Yoon
MRMiriam Rafailovich
Miriam Rafailovich
BCBenjamin Chu
Benjamin Chu

17 March 2022 in Korea-Australia Rheology Journal
Verified
Journal Article
Closed access
PDF file
DYDongcheol Yang
Dongcheol Yang
JLJunhan Lee
Junhan Lee
KYKyunghwan Yoon
Kyunghwan Yoon
JKJongsun Kim
Jongsun Kim

6 November 2020 in Polymers
Verified
Journal Article
Open access
PDF file
MKMooyeon Kim
Mooyeon Kim
JLJunhan Lee
Junhan Lee
KYKyunghwan Yoon
Kyunghwan Yoon
In the display industry, the LCD backlight unit (BLU) module is variously used in mobile phones, notebook computers, monitors, and TVs. The light guide plate (LGP), which is one of the core parts of a BLU, is getting bigger and thinner consistently. Conventional injection methods and injection processes like injection compression molding (ICM) are becoming more complex and harsher with high-speed injection at high mold and melt temperatures. These approaches lead to a change in physical properties and a decrease in optical properties such as yellowing and color shift in injection-molded parts. In the present study, an injection molding experiment was conducted to understand the effect of surface patterns and major injection process conditions like mold and melt temperatures on the color shift in injection-molded mobile LGP. Optical properties obtained by the direct and total transmittance and CIE xy chromaticity diagram for injection-molded mobile LGP were measured with a UV–visible spectrophotometer. From the measurement of patternless LGP, it was found that total or direct transmittance was not affected by molding process variables. It was also found that yellow shift, ΔE(xy), occurred as much as 0.00111 ± 0.00014, and a color shift angle, Θ(xy), of 43.05 ± 2.44° was recorded in CIE coordinates for all nine experimental cases. From the measurement of total transmittance of patterned LGP, ΔE(xy) and Θ(xx) were found to be almost the same as those of patternless LGP for the locations of low and medium density of the pattern for the LGP, T1 and T2. The measured data of direct transmittance of patterned LGP showed that additional yellow shift due to scattering caused by surface micropattern. Interestingly, Θ(xy) of patterned data remained 43.05 ± 2.44°, which was almost the same as that found in the case of patternless LGP.