Low-current-collapse normally OFF GaN-on-Si MIS high-electron-mobility transistors (MIS-HEMTs) are fabricated with low-pressure chemical-vapor-deposited SiN x (LPCVD-SiN x ) passivation and high-temperature low-damage gate-recess technique. The high-thermal-stability LPCVD-SiN x enables a passivation-prior-to-ohmic process strategy and effectively suppresses deep states at the passivation/HEMT interface. The fabricated MIS-HEMTs feature a high V TH of +0.85 V at the drain current of 1 μA/mm and a remarkable ON/OFF current ratio of 10 10 while reduced dynamic ON-resistance as compared to plasma-enhanced chemical-vapor-deposited SiO 2 passivation. High field-effect channel mobility of 180 cm 2 /V·s is achieved, leading to a high maximum drain current density of 663 mA/mm.
22 August 2017 in Physical Chemistry Chemical Physics
Applications of rechargeable non-lithium-ion batteries (Na+, K+, Ca2+, Mg2+, and Al3+ NLIBs) are significantly hampered by the deficiency of suitable electrode materials. Searching for anode materials with desirable electrochemical performance is urgent for the large-scale energy storage demands of next generation renewable energy technologies. In this study, three types of recently synthesized borophenes are predicted to serve as high-performing anodes for NLIBs based on density functional theory. All the borophenes considered here are metallic with favorable in-plane stiffness. Dirac fermions were identified in two types of borophenes, guaranteeing their high electron mobility. Moreover, borophene configuration-dependent metal-ion migration, theoretical capacities, and open-circuit voltages were demonstrated with respect to the different adsorption behaviors and atom mass densities of anode materials. Our results provide insights into the configuration-dependent electrode performance of borophene and the corresponding metal-ion storage mechanism.
A convenient and effective soft chemical method is presented for the synthesis of nano-scaled calcium citrate sheets. The preparation involved the precipitation of nano-calcium citrate by adding ethanol to reach the super saturation state of a solution containing calcium and citrate salts. The obtained nano-calcium citrate formed nanosheets, with the following dimensions: width of about 50∼500 nm and thickness of about 8∼30 nm. The results of the XRD analysis confirmed that the obtained sample is calcium citrate tetrahydrate, and the crystal degree decreased with an increase quantity of ethanol added. Animal experiments showed that the calcium citrate can promote the formation of new bone.
About Me
Professor and doctoral supervisor of Chengdu University of Technology.
Professor and doctoral supervisor of Chengdu University of Technology.