Elisabet Benedicto

Mrs. Elisabet Benedicto

Universidad Nacional de Educación a Distancia, Calle Juan del Rosal,12, 28040 Madrid, Spain
+1
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
EBElisabet Benedicto
Elisabet Benedicto
DIEGO CAROUDIEGO CAROU
DIEGO CAROU
ERE.M. Rubio
E.M. Rubio

4 May 2022 in International Journal of Precision Engineering and Manufacturing-Green Technology
Verified
Journal Article
Open access
PDF file
EBElisabet Benedicto
Elisabet Benedicto
EREva María Rubio
Eva María Rubio
LALaurent Aubouy
Laurent Aubouy
Maria A. Saenz-NuñoMaria A. Saenz-Nuño
Maria A. Saenz-Nuño
This paper presents the study of the finishing, repair, and maintenance turning operations of gamma titanium aluminide (γ-TiAl) parts from the aeronautic industry, with the aim to evaluate different sustainable lubrication/cooling environments, including a newly developed synthetic ester water-based metalworking fluid (EcoMWF) to replace mineral-based MWF (MWF). The systems considered in this work are dry, cold-compressed air, minimum quantity lubrication (MQL), cryogenic, and flood on turning of a new and relatively low explored titanium alloy, γ-TiAl. Therefore, the influence of machining parameters and insert type on tool wear, surface roughness, roundness, and cutting temperature have been investigated for each environment. Results detailed in this study showed a significant influence of the lubrication/cooling systems on the machinability of γ-TiAl. The study also revealed that the sustainability of turning γ-TiAl could be improved under the cryogenic system and the new EcoMWF, keeping the same machining performance as common mineral-based MWF. Graphical abstract

8 May 2021 in Metals
Verified
Journal Article
Open access
PDF file
EBElisabet Benedicto
Elisabet Benedicto
EREva M. Rubio
Eva M. Rubio
LALaurent Aubouy
Laurent Aubouy
Maria A. Saenz-NuñoMaria A. Saenz-Nuño
Maria A. Saenz-Nuño
The machinability of titanium alloys still represents a demanding challenge and the development of new clean technologies to lubricate and cool is greatly needed. As a sustainable alternative to mineral oil, esters have shown excellent performance during machining. Herein, the aim of this work is to investigate the influence of esters’ molecular structure in oil-in-water emulsions and their interaction with the surface to form a lubricating film, thus improving the efficiency of the cutting fluid. The lubricity performance and tool wear protection are studied through film formation analysis and the tapping process on Ti6Al4V. The results show that the lubricity performance is improved by increasing the formation of the organic film on the metal surface, which depends on the ester’s molecular structure and its ability to adsorb on the surface against other surface-active compounds. Among the cutting fluids, noteworthy results are obtained using trimethylolpropane trioleate, which increases the lubricating film formation (containing 62% ester), thus improving the lubricity by up to 12% and reducing the torque increase due to tool wear by 26.8%. This work could be very useful for fields where often use difficult-to-machine materials—such as Ti6Al4V or γ-TiAl—which require large amounts of cutting fluids, since the formulation developed will allow the processes to be more efficient and sustainable.

19 October 2020 in Metals
Verified
Journal Article
Open access
PDF file
EBElisabet Benedicto
Elisabet Benedicto
EREva M. Rubio
Eva M. Rubio
DIEGO CAROUDIEGO CAROU
DIEGO CAROU
CSCoral Santacruz
Coral Santacruz
In cutting operations of titanium alloys, most of the problems are related to the high consumption of cutting tools due to excessive wear. An improvement of metalworking fluid (MWF) technology would increase the productivity, sustainability, and quality of machining processes by lubricating and cooling. In this research article, the authors varied the surfactant’s charge, the hydrocarbon chain length, and the ethoxylation degree. Surfactants were dispersed at 1.2 mM in water and trimethylolpropane oleate to produce water-based MWF. Infrared reflection absorption spectroscopy and total organic carbon analysis were used to study the influence of surfactant structure on the film forming ability of the emulsion and performance was studied on Ti6Al4V using tapping torque test. The results showed that by changing the molecular structure of the surfactant, it is possible to vary the affinity between the ester and the substrate and reach an optimal combination, which improves the formation of a tribofilm. The mixture with anionic surfactants has good tribology performance, while non-ionic surfactants shorten the tool’s life. Moreover, the increase in the hydrocarbon chain length and the number of ethoxylations of surfactants promotes the adhesion of ester onto the metal surface, improving the lubricity properties of environmentally friendly MWF.

1 December 2018 in Tribology International
Verified
Journal Article
Closed access
EBElisabet Benedicto
Elisabet Benedicto
DIEGO CAROUDIEGO CAROU
DIEGO CAROU
ERE.M. Rubio
E.M. Rubio
LBL. Batlle
L. Batlle