Raja Sekhar Reddy Gajjela

Mr. Raja Sekhar Reddy Gajjela

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
PKPaul Koenraad
Paul Koenraad
The fundamental understanding of quantum dot (QD) growth mechanism is essential to improve QD based optoelectronic devices. The size, shape, composition, and density of the QDs strongly influence the optoelectronic properties of the QDs. In this article, we present a detailed review on atomic-scale characterization of droplet epitaxy quantum dots by cross-sectional scanning tunneling microscopy (X-STM) and atom probe tomography (APT). We will discuss both strain-free GaAs/AlGaAs QDs and strained InAs/InP QDs grown by droplet epitaxy. The effects of various growth conditions on morphology and composition are presented. The efficiency of methods such as flushing technique is shown by comparing with conventional droplet epitaxy QDs to further gain control over QD height. A detailed characterization of etch pits in both QD systems is provided by X-STM and APT. This review presents an overview of detailed structural and compositional analysis that have assisted in improving the fabrication of QD based optoelectronic devices grown by droplet epitaxy.

15 June 2021 in Light: Science & Applications
Verified
Journal Article
Open access
PDF file
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
AHArthur L. Hendriks
Arthur L. Hendriks
JDJames O. Douglas
James O. Douglas
Elisa Maddalena SalaElisa Maddalena Sala
Elisa Maddalena Sala
PSPetr Steindl
Petr Steindl
PKPaul Koenraad
Paul Koenraad
We investigated metal-organic vapor phase epitaxy grown (InGa)(AsSb)/GaAs/GaP Stranski–Krastanov quantum dots (QDs) with potential applications in QD-Flash memories by cross-sectional scanning tunneling microscopy (X-STM) and atom probe tomography (APT). The combination of X-STM and APT is a very powerful approach to study semiconductor heterostructures with atomic resolution, which provides detailed structural and compositional information on the system. The rather small QDs are found to be of truncated pyramid shape with a very small top facet and occur in our sample with a very high density of ∼4 × 1011 cm−2. APT experiments revealed that the QDs are GaAs rich with smaller amounts of In and Sb. Finite element (FE) simulations are performed using structural data from X-STM to calculate the lattice constant and the outward relaxation of the cleaved surface. The composition of the QDs is estimated by combining the results from X-STM and the FE simulations, yielding ∼InxGa1 − xAs1 − ySby, where x = 0.25–0.30 and y = 0.10–0.15. Noticeably, the reported composition is in good agreement with the experimental results obtained by APT, previous optical, electrical, and theoretical analysis carried out on this material system. This confirms that the InGaSb and GaAs layers involved in the QD formation have strongly intermixed. A detailed analysis of the QD capping layer shows the segregation of Sb and In from the QD layer, where both APT and X-STM show that the Sb mainly resides outside the QDs proving that Sb has mainly acted as a surfactant during the dot formation. Our structural and compositional analysis provides a valuable insight into this novel QD system and a path for further growth optimization to improve the storage time of the QD-Flash memory devices.

30 May 2022 in ACS Applied Nano Materials
Verified
Journal Article
Open access
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
Elisa Maddalena SalaElisa Maddalena Sala
Elisa Maddalena Sala
JHJon Heffernan
Jon Heffernan
PKPaul M. Koenraad
Paul M. Koenraad
We present a detailed atomic-resolution study of morphology and substrate etching mechanism in InAs/InP droplet epitaxy quantum dots (QDs) grown by metal-organic vapor phase epitaxy via cross-sectional scanning tunneling microscopy (X-STM). Two different etching processes are observed depending on the crystallization temperature: local drilling and long-range etching. In local drilling occurring at temperatures of ≤500 °C, the In droplet locally liquefies the InP underneath and the P atoms can easily diffuse out of the droplet to the edges. During crystallization, the As atoms diffuse into the droplet and crystallize at the solid-liquid interface, forming an InAs etch pit underneath the QD. In long-range etching, occurring at higher temperatures of >500 °C, the InP layer is destabilized and the In atoms from the surroundings migrate toward the droplet. The P atoms can easily escape from the surface into the vacuum, forming trenches around the QD. We show for the first time the formation of trenches and long-range etching in InAs/InP QDs with atomic resolution. Both etching processes can be suppressed by growing a thin layer of InGaAs prior to the droplet deposition. The QD composition is estimated by finite element modeling in combination with X-STM. The change in the morphology of QDs due to etching can strongly influence the fine structure splitting. Therefore, the current atomic-resolution study sheds light on the morphology and etching behavior as a function of crystallization temperature and provides a valuable insight into the formation of InAs/InP droplet epitaxy QDs which have potential applications in quantum information technologies.

5 November 2020 in Physical Review Materials
Verified
Journal Article
Closed access
PDF file
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
AHA. L. Hendriks
A. L. Hendriks
AAA. Alzeidan
A. Alzeidan
TCT. F. Cantalice
T. F. Cantalice
AQA. A. Quivy
A. A. Quivy
PKPaul Koenraad
Paul Koenraad
Cross-sectional scanning tunneling microscopy (X-STM) was employed to characterize the InAs submonolayer quantum dots (SMLQDs) grown on top of a Si-doped GaAs(001) substrate in the presence of (2×4) and c(4×4) surface reconstructions. Multiple layers were grown under different conditions to study their effects on the formation, morphology, and local composition of the SMLQDs. The morphological and compositional variations in the SMLQDs were observed by both filled and empty-state imaging. A detailed analysis of indium segregation in the SMLQD layers was described by fitting the local indium-concentration profile with a standard segregation model. We observed a strong influence of the arsenic flux over the indium incorporation and formation of the SMLQDs. We investigated the well-width fluctuations of the InGaAs quantum well in which the SMLQDs were formed. The well-width fluctuations were small compared to the more pronounced composition fluctuations in all the layers. The lateral compositional variations lead to the formation of indium-rich clusters which can act as quantum dots and yield charge-carrier confinement.

21 June 2019 in Small
Verified
Journal Article
Open access
PDF file
RCRaimondo Cecchini
Raimondo Cecchini
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
Christian MartellaChristian Martella
Christian Martella
CWClaudia Wiemer
Claudia Wiemer
Alessio LampertiAlessio Lamperti
Alessio Lamperti
Massimo LongoMassimo Longo
Massimo Longo
Sb2Te3 exhibits several technologically relevant properties, such as high thermoelectric efficiency, topological insulator character, and phase change memory behavior. Improved performances are observed and novel effects are predicted for this and other chalcogenide alloys when synthetized in the form of high‐aspect‐ratio nanostructures. The ability to grow chalcogenide nanowires and nanopillars (NPs) with high crystal quality in a controlled fashion, in terms of their size and position, can boost the realization of novel thermoelectric, spintronic, and memory devices. Here, it is shown that highly dense arrays of ultrascaled Sb2Te3 NPs can be grown by metal organic chemical vapor deposition (MOCVD) on patterned substrates. In particular, crystalline Sb2Te3 NPs with a diameter of 20 nm and a height of 200 nm are obtained in Au‐functionalized, anodized aluminum oxide (AAO) templates with a pore density of ≈5 × 1010 cm−2. Also, MOCVD growth of Sb2Te3 can be followed either by mechanical polishing and chemical etching to produce Sb2Te3 NPs arrays with planar surfaces or by chemical dissolution of the AAO templates to obtain freestanding Sb2Te3 NPs forests. The illustrated growth method can be further scaled to smaller pore sizes and employed for other MOCVD‐grown chalcogenide alloys and patterned substrates.

6 May 2022 in Nanotechnology
Verified
Journal Article
Open access
RGRaja Sekhar Reddy Gajjela
Raja Sekhar Reddy Gajjela
NVNiels R S van Venrooij
Niels R S van Venrooij
ACAdonai R da Cruz
Adonai R da Cruz
JSJoanna Skiba-Szymanska
Joanna Skiba-Szymanska
RSR Mark Stevenson
R Mark Stevenson
PKPaul Koenraad
Paul Koenraad
We investigated metal-organic vapor phase epitaxy grown droplet epitaxy (DE) and Stranski–Krastanov (SK) InAs/InP quantum dots (QDs) by cross-sectional scanning tunneling microscopy (X-STM). We present an atomic-scale comparison of structural characteristics of QDs grown by both growth methods proving that the DE yields more uniform and shape-symmetric QDs. Both DE and SKQDs are found to be truncated pyramid-shaped with a large and sharp top facet. We report the formation of localized etch pits for the first time in InAs/InP DEQDs with atomic resolution. We discuss the droplet etching mechanism in detail to understand the formation of etch pits underneath the DEQDs. A summary of the effect of etch pit size and position on fine structure splitting (FSS) is provided via the k · p theory. Finite element (FE) simulations are performed to fit the experimental outward relaxation and lattice constant profiles of the cleaved QDs. The composition of QDs is estimated to be pure InAs obtained by combining both FE simulations and X-STM results. The preferential formation of {136} and {122} side facets was observed for the DEQDs. The formation of a DE wetting layer from As-P surface exchange is compared with the standard SKQDs wetting layer. The detailed structural characterization performed in this work provides valuable feedback for further growth optimization to obtain QDs with even lower FSS for applications in quantum technology.