Dyestuff is one of the most widely released pollutants into the environment. Many approaches have been considered to deal with the dye removal from polluted water such as adsorption, ultrafiltration, osmosis, solvent extraction and photocatalytic degradation. The photocatalytic degradation process is one of the most beneficial, economical and environmentally friendly ways to degrade the organic pollutants from wastewater. In this study, an efficient ferrite-based photocatalyst, AgFeO2/rGO/TiO2 was successfully developed using simple deposition and reflux method. Physical, chemical and structural properties were analyzed by using XRD, FTIR Raman and PL spectroscopy. The efficiency of photocatalyst was investigated for the decolorization of methyl blue (MB) dye and activity was measured through UV-vis spectroscopy. The effect of parameters like pH, concentrations of MB dye, and loading of silver ferrite (AgFeO2) was investigated. The study depicted that the properties of TiO2 were improved due to addition of silver ferrite and reduced graphene oxide (rGO). The 2.5% AgFeO2/rGO/TiO2 exhibited the highest efficiency and completely degraded the 50 ppm of MB dye in 30 min. The parametric study revealed that dye decolorization is faster in a neutral solution than in basic and acidic medium. The higher performance of the photocatalyst was attributed to the reduced charge recombination and improved optical properties. Thus, AgFeO2/rGO/TiO2 can be a potential composite for photocatalytic dye degradation and other photocatalytic applications under UV-Visible light irradiations.
TiO2-based materials are commonly employed as photocatalysts for industrial wastewater treatment. The primary reasons of employing TiO2 include cost effectiveness, ready availability, eco-friendliness, non-toxic behavior, and exceptional resistance towards photo-corrosion. However, the wider band gap of pure TiO2 restricts its performance because of its optical absorption of solar light to the ultraviolet (UV) region only, and to some extent of photo-excited charge recombination. In the present work an attempt is made to develop a facile synthesis approach by using urea, a cheap chemical precursor, to form nitrogen doped TiO2 with the key objective of extended light absorption and thus enhanced photocatalytic performance. It was also observed that the urea-induced anatase phase enrichment of TiO2 is another key factor in promoting the photocatalytic performance. The photocatalysts prepared by varying the amount of urea as a nitrogen dopant precursor, are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) to evaluate their crystallinity, morphology, functional groups, and charge separation properties, respectively. Moreover, the surface area was also estimated by physicochemical adsorption. The maximum nitrogen-doped sample yielded >99% photodegradation efficiency of methylene blue (MB) dye-simulated wastewater as compared to a pure TiO2 sample which exhibited 6.46% efficiency. The results show that the simultaneous factors of nitrogen doping and anatase phase enhancement contributes significantly towards the improvement of photocatalytic performance.
29 April 2022 in Journal of Mechanical Science and Technology