Actually, there is a growing interest in the biotechnological production of lactic acid by fermentation aiming to substitute fossil fuel routes. The development of an efficient method for its separation and purification from fermentation broth is very important to assure the economic viability of production. Due to its high reactivity and tendency to decompose at high temperatures, the study of lactic acid thermal behavior is essential for its separation processes and potential application. In the present study, differential scanning calorimetry (DSC) analyses showed endothermic peaks related to the process of evaporation. Data of thermogravimetry (TG/DTG) were correlated to Arrhenius and Kissinger equations to provide the evaporation kinetic parameters and used to determine the vaporization enthalpy. Activation energies were 51.08 and 48.37 kJ·mol⁻¹ and frequency values were 859.97 and 968.81 s⁻¹ obtained by Arrhenius and Kissinger equations, respectively. Thermogravimetry, coupled with mass spectroscopy (TG-MS), provided useful information about decomposition products when lactic acid was heated at 573 K for approximately 30 min.

Lactic acid is a high-value molecule with a vast number of applications. Its production in the biorefineries model is a possibility for this sector to aggregate value to its production chain. Thus, this investigation presents a biorefinery model based on the traditional sugar beet industry proposing an approach to produce lactic acid from a waste stream. Sugar beet is used to produce sugar and ethanol, and the remaining pulp is sent to animal feed. Using Bacillus coagulans in a continuous fermentation, 2781.01 g of lactic acid was produced from 3916.91 g of sugars from hydrolyzed sugar beet pulp, with a maximum productivity of 18.06 g L⁻¹h⁻¹. Without interfering in the sugar production, ethanol, or lactic acid, it is also possible to produce pectin and phenolic compounds in the biorefinery. The lactic acid produced was purified by a bipolar membrane electrodialysis and the recovery reached 788.80 g/L with 98% w/w purity.

In this work, the evaluation of lactic acid concentration from a synthetic mixture of water and lactic acid (3 wt% of lactic acid) was carried out using short path evaporation (SPE). The evaporator temperature of a SPE is one of the important technological parameters that determine an evaporator’s operation. In this study, the effect of the evaporator temperature on the lactic acid purity and recovery was observed from 303 to 443 K. The results showed that, in the studied range, the evaporator temperature of 353 K can be regarded as the best, since an increase of 2.15 times in the solution concentration was obtained.