The development of novel biocompatible and biodegradable materials for medical applications has been drawing significant interest in the scientific community for years. Particularly, chitosan loaded with silver nanoparticles (Ag NPs) has a strong antimicrobial potential and could be applied, for example, as wound dressing material. In this work, chitosan/Ag NP composites were produced utilizing a single-step plasma-solution process, which is simple and environmentally friendly. An acetic solution of chitosan containing AgNO3 was treated by the direct current (DC) atmospheric pressure glow discharge, with the liquid serving as either cathode or anode. The plasma-solution system with liquid anode is more useful for the production of Ag NPs. Nevertheless, the NP size is comparable for both cases. The plasma treatment with both polarities led to chitosan degradation. The cleavage of glucosidic chains mostly occurred in the system with the liquid cathode, whereas the side oxidation reactions took place when the solution served as the anode. The oxidation processes were possibly induced by the hydrogen peroxide H2O2 efficiently formed in the last case. The composite materials produced with both polarities of liquid electrode demonstrated the bactericidal action against Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and Gram-positive Bacillus subtilis.
A mechanical activation of chitin suspended in water has been employed under conditions of a combined impact of cavitation and high shear stresses realized in a rotor-pulse device. For chitin samples that underwent preliminary activation for 5–20 s, the value of sorption capacity toward copper ions increased twoto fourfold in dependence on the treatment duration as compared to the initial sample. The experimental data corroborating that the main factors of mechanical activation are the increase of the specific surface area, porosity, and particle-chitin amorphization are presented. It has been established that the increase of the duration of mechanical treatment over the experimentally determined optimal value yields a decrease of the activation effect, which is related to the processes of restructuring and recrystallization. It has been shown that the Langmuir model allows rather adequate description of the sorption process with the correlation coefficient of 0.98–0.99.