Natural ingredients have been used in skincare products for thousands of years. The current focus is on novel natural bioactivities that shield the skin from UV rays and free radicals, among other damaging elements, while enhancing skin health. Free radicals significantly contribute to skin damage and hasten ageing by interfering with defence and restorative processes. Plants contain natural chemicals that can scavenge free radicals and have antioxidant capabilities. Plant materials are becoming increasingly popular as natural antioxidants related to the expanding interest in plant chemistry. This review focuses on the significance of medicinal plants in skin health and ageing and their potential as a source of antioxidant substances such as vitamins, polyphenols, stilbenes, flavonoids, and methylxanthines.

In the last years, nanoparticles such as TiO₂, ZnO, NiO, CuO and Fe₂O₃ were mainly used in wastewater applications. In addition to the positive aspects concerning using nanoparticles in the advanced oxidation process of wastewater containing pollutants, the impact of these nanoparticles on the environment must also be investigated. The toxicity of nanoparticles is generally investigated by the nanomaterials’ effect on green algae, especially on Chlorella vulgaris. In this review, several aspects are reviewed: the Chlorella vulgaris culture monitoring and growth parameters, the effect of different nanoparticles on Chlorella vulgaris, the toxicity of photocatalyst nanoparticles, and the mechanism of photocatalyst during oxidative stress on the photosynthetic mechanism of Chlorella vulgaris. The Bold basal medium (BBM) is generally recognized as an excellent standard cultivation medium for Chlorella vulgaris in the known environmental conditions such as temperature in the range 20–30 °C and light intensity of around 150 μE·m²·s⁻¹ under a 16/8 h light/dark cycle. The nanoparticles synthesis methods influence the particle size, morphology, density, surface area to generate growth inhibition and further algal deaths at the nanoparticle-dependent concentration. Moreover, the results revealed that nanoparticles caused a more potent inhibitory effect on microalgal growth and severely disrupted algal cells’ membranes.

Multiple antibiotic resistance has now become a major obstacle to the treatment of infectious diseases. In this context, the application of nanotechnology in medicine is a promising alternative for the prevention of infections with multidrug-resistant germs. The use of silver as a powerful antibacterial agent has attracted much interest. TiO₂ and SiO₂ thin films enhanced with Ag particles have been developed with the aim of maintaining the transparency of the polymer films. Antibacterial activity was evaluated for a Gram-negative species-Escherichia coli-in concentrations of 10⁵ and 10⁴ CFU/mL in different conditions-activation by UV irradiation, single layer and double layer. Increased antibacterial efficacy of TiO₂-deposited foil was found for the tests that had been exposed to UV activation. In the case of bilayer tests, the efficiency was higher compared to those in a single layer, as the contact surface between the films and the bacterial suspension increased. Films can be used as a potential method to limit bacterial growth on hospital surfaces, such as telephone screens and medical equipment, given their optimized characteristics and proven antibacterial efficacy.

Biomaterials are an important and integrated part of modern medicine, and their development and improvement are essential. The fundamental requirement of a biomaterial is found to be in its interaction with the surrounding environment, with which it must coexist. The aim of this study was to assess the biological characteristics of hydroxyapatite (HAp)-based coatings doped with Mg and Zn ions obtained by the pulsed galvanostatic electrochemical method on the surface of pure titanium (cp-Ti) functionalized with titanium dioxide nanotubes (NTs TiO₂) obtained by anodic oxidation. The obtained results highlighted that the addition of Zn or Mg into the HAp structure enhances the in vitro response of the cp-Ti surface functionalized with NT TiO₂. The contact angle and surface free energy showed that all the developed surfaces have a hydrophilic character in comparison with the cp-Ti surface. The HAp-based coatings doped with Zn registered superior values than the ones with Mg, in terms of biomineralization, electrochemical behavior, and cell interaction. Overall, it can be said that the addition of Mg or Zn can enhance the in vitro behavior of the HAp-based coatings in accordance with clinical requirements. Antibacterial tests showed that the proposed HAp-Mg coatings had no efficiency against Escherichia coli, while the HAp-Zn coatings registered the highest antibacterial efficiency.

Nanoparticles have applications in various fields such as manufacturing and materials synthesis, the environment, electronics, energy harvesting, and medicine. Besides many applications of nanoparticles, further research is required for toxic environmental effect investigation. The toxic effect of titanium dioxide nanoparticles on the physiology of the green alga Chlorella vulgaris was studied with a widely used pesticide, imidacloprid (IMD). Chlorella vulgaris was exposed for 120 h in Bold’s basal medium to different toxic compounds, such as (i) a high concentration of TiO₂ nanoparticles, 150–2000 mg/L, usually optimised in the photocatalytic degradation of wastewater, (ii) an extremely toxic pesticide for the aquatic environment, imidacloprid, in concentrations ranging from 5 to 40 mg/L, (iii) TiO₂ nanoparticles combined with imidacloprid, usually used in a photocatalytic system. The results show that the TiO₂ nanoparticles and IMD inhibited Chlorella vulgaris cell growth and decreased the biovolume by approximately 80% when 2 g/L TiO₂ was used, meaning that the cells devised a mechanism to cope with a potentially stressful situation; 120 h of Chlorella vulgaris exposure to 40 mg/L of IMD resulted in a 16% decreased cell diameter and a 41% decrease in cell volume relative to the control sample, associated with the toxic effect of pesticides on the cells. Our study confirms the toxicity of nanoparticles through algal growth inhibition with an effective concentration (EC50) value measured after 72 h of 388.14 mg/L for TiO₂ and 13 mg/L for IMD in a single-toxic system. The EC50 of TiO₂ slowly decreased from 258.42 to 311.11 mg/L when IMD from 5 to 20 mg/L was added to the binary-toxic system. The concentration of TiO₂ in the binary-toxic system did not change the EC50 for IMD, and its value was 0.019 g/L. The photodegradation process of imidacloprid (range of 5–40 mg/L) was also investigated in the algal medium incubated with 150–600 mg/L of titanium dioxide.

The increasing occurrence of infections caused by pathogens found on objects of everyday use requires a variety of solutions for active disinfection. Using active materials that do not require daily maintenance has a potential advantage for their acceptance. In this contribution, transparent films, with silver as the main antimicrobial agent and a total thickness of a few tens of nm, were deposited on flexible self-adhesive polymer foils used as screen protectors. TiO₂ and SiO₂ were used as transparent matrix to embed the Ag nanoparticles, ensuring also their mechanical protection and controlled growth. HiPIMS (High-Power Impulse Magnetron Sputtering) was used for the sputtering of the Ag target and fine control of the Ag amount in the layer, whereas TiO₂ and SiO₂ were sputtered in RF (Radio Frequency) mode. The thin film surface was investigated by AFM (Atomic Force Microscopy), providing information on the topography of the coatings and their preferential growth on the textured polymer foil. XRD (X-Ray Diffraction) revealed the presence of specific Ag peaks in an amorphous oxide matrix. UV-Vis-NIR (Ultraviolet-Visible-Near Infrared) spectroscopy revealed the presence of nanostructured Ag, characterized by preferential absorption in the 400 to 500 nm spectral range. The antimicrobial properties were assessed using an antimicrobial test with the Escherichia coli strain. The highest efficiency was observed for the Ag/SiO₂ combination, in the concentration range of 10⁴–10⁵ CFU/mL.