In this study, a novel nucleating agent composed of graphene oxide (GO) and silicon dioxide (SiO2) (GO–SiO2) is developed. GO is used as a skeleton material through which SiO2 nanomaterials are absorbed and subsequently incorporated into Na2SO4·10H2O phase change materials (PCMs). Furthermore, this study examines the phase change performance of the composite Na2SO4·10H2O materials. Fourier-transform infrared (FTIR) spectra confirmed the physical combination of GO with a SiO2 nanoparticles. Scanning electron microscope (SEM) results showed that the GO–SiO2 composite exhibited a layered structure and excellent dispersibility. The GO–SiO2 composite Na2SO4·10H2O PCMs displayed a low level of supercooling, i.e., about 1.2 °C with the addition of GO–SiO2 at 2.45 wt%. This was because the synergistic relation of the GO and the high dispersion SiO2, imparted more nucleation sites for Na2SO4·10H2O. Additionally, the prepared PCMs achieved high phase change latent heat and thermal conductivity, even under these conditions. The results show that the GO–SiO2 in the Na2SO4·10H2O exhibited advantageous application prospects for the improvement of the thermal performance of hydrate salts.
Micro-nanoencapsulated phase change materials (M-NEPCMs) are proposed to be useful in liquid desiccant dehumidification by restraining the temperature rise in the moisture-removal process and improving the dehumidification efficiency. In this paper, the n-octadecane M-NEPCMs with desirable thermal properties for internally-cooled dehumidification were fabricated by using compound emulsifiers through the in-situ polymerization method. Melamine-formaldehyde resin was used as the shell material. The effects of the mixing ratio, emulsification methods and amount of the compound emulsifiers on the morphology, size and thermal properties of the M-NEPCMs were investigated experimentally. The optimum weight mixing ratio of the compound emulsifiers is SDS (sodium dodecyl sulfate):Tween80 (polyoxyethylene sorbitan monooleate):Span80 (sorbitan monooleate) = 0.1:0.6:0.3, which achieves the best stability of the n-octadecane emulsion. When the compound emulsifiers are 10 wt. % of the core material, the melting enthalpy of M-NEPCMs reaches its maximum of 145.26 J/g of capsules, with an encapsulation efficiency of 62.88% and a mean diameter of 636 nm. The sub-cooling of the prepared M-NEPCMs is lower than 3 °C, with an acceptable thermal reliability after the thermal cycling test. A pre-emulsification prior to the addition of deionized water in the emulsification is beneficial to the morphology of the capsules, as the phase change enthalpy can be increased by 123.7%.