Maria Siddique

Dr. Maria Siddique

Comsat University Islamabad, Abbottabad Campus

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
MSMujaddad Sultan
Mujaddad Sultan
MSMaria Siddique
Maria Siddique
RKRomana Khan
Romana Khan
AFAhmed Fallatah
Ahmed Fallatah
NFNighat Fatima
Nighat Fatima
AMAbbasi Arshad Mehmood
Abbasi Arshad Mehmood
Present study was conducted to investigate the adsorption and ultrasound-assisted adsorption potential of silver nanoparticles (AgNPs) and silver nanoparticles loaded on chitosan (AgCS composite) as nano-adsorbents for methylene blue (MB) removal. AgNPs were synthesized using leaf extract of Ligustrum lucidum, which were incorporated on the chitosan’s surface for modification. UV–Vis Spectroscopy, FTIR, XRD, SEM, and EDX techniques were used to confirm the synthesis and characterization of nanomaterials. Batch adsorption and sono-adsorption experiments for the removal of MB were executed under optimal conditions; for fitting the experimental equilibrium data, Langmuir and Freundlich’s isotherm models were adopted. In addition, the antimicrobial potential of the AgNPs and AgCS were examined against selected bacterial and fungal strains. UV–Vis spectroscopy confirmed AgNPs synthesis from the leaf extract of L. lucidum used as a reducer, which was spherical as exposed in the SEM analysis. The FTIR spectrum illustrated phytochemicals in the leaf extract of L. lucidum functioning as stabilizing agents around AgNPs and AgCS. Whereas, corresponding crystalline peaks of nanomaterial, including a signal peak at 3 keV indicating the presence of silver, were confirmed by XRD and EDX. The Langmuir model was chosen as an efficient model for adsorption and sono-adsorption, which exposed that under optimum conditions (pH = 6, dye initial concentration = 5 mg L−1, adsorbents dosage = 0.005 g, time = 120 min, US power 80 W), MB removal efficiency of AgNPs was >70%, using ultrasound-assisted adsorption compared to the non-sonicated adsorption. Furthermore, AgNPs exhibited promising antibacterial potential against Staphylococcus aureus with the maximum zone of inhibition (14.67 ± 0.47 mm). It was concluded that the green synthesis approach for the large-scale production of metallic nanoparticles is quite effective and can be recommended for efficient and cost-effective way to eradicate dyes, particularly from textile wastewater.

Asmat AliAsmat Ali
Asmat Ali
MSMaria Siddique
Maria Siddique
Wei ChenWei Chen
Wei Chen
ZHZhixin Han
Zhixin Han
RKRomana Khan
Romana Khan
ISIrum Shahzadi
Irum Shahzadi
Phenol is the most common organic pollutant in many industrial wastewaters that may pose a health risk to humans due to its widespread application as industrial ingredients and additives. In this study, waste green tea leaves (WGTLs) were modified through chemical activation/carbonization and used as an adsorbent in the presence of ultrasound (cavitation) to eliminate phenol in the aqueous solution. Different treatments, such as cavitation, adsorption, and sono-adsorption were investigated to remove the phenol. The scanning electron microscope (SEM) morphology of the adsorbent revealed that the structure of WGTLs was porous before phenol was adsorbed. A Fourier Transform Infrared (FTIR) analysis showed an open chain of carboxylic acids after the sono-adsorption process. The results revealed that the sono-adsorption process is more efficient with enhanced removal percentages than individual processes. A maximum phenol removal of 92% was obtained using the sono-adsorption process under an optimal set of operating parameters, such as pH 3.5, 25 mg L−1 phenol concentration, 800 mg L−1 adsorbent dosage, 60 min time interval, 30 ± 2 °C temperature, and 80 W cavitation power. Removal of chemical oxygen demand (COD) and total organic carbon (TOC) reached 85% and 53%. The Freundlich isotherm model with a larger correlation coefficient (R2, 0.972) was better fitted for nonlinear regression than the Langmuir model, and the sono-adsorption process confirmed the pseudo-second-order reaction kinetics. The findings indicated that WGTLs in the presence of a cavitation effect prove to be a promising candidate for reducing phenol from the aqueous environment.

4 February 2022 in Frontiers in Environmental Science
Verified
Journal Article
Open access
MKMuhammad Naeem Khan
Muhammad Naeem Khan
MSMaria Siddique
Maria Siddique
NMNosheen Mirza
Nosheen Mirza
RKRomana Khan
Romana Khan
MBMuhammad Bilal
Muhammad Bilal
Ajmal KhanAjmal Khan
Ajmal Khan
The silver-embedded wheat straw biochar (Ag–WBC) composite was tailored effectively via the green synthetic route and was used as a nano-adsorbent for the removal of phenol by using adsorption and sono-adsorption processes. Ligustrum lucidum leaf extract was employed as a reducer to prepare silver nanoparticles, and biochar was synthesized from wheat straw via pyrolysis at 450–500°C. The synthesized biochar and Ag–WBC were characterized by using UV–Vis, SEM, EDX, and FTIR. The study confirms the ability of plant leaf extract of L. lucidum to synthesize AgNPs and Ag–WBC composites for the first time. UV–vis spectroscopic analysis confirms the formation of AgNPs and Ag–WBC composites (400–440 nm). SEM results showed that the size of the Ag–WBC composite is in the range of 80–100 nm. The elemental profile of the synthesized Ag–WBC composite shows a higher count at 3 kev due to silver. FTIR analysis revealed the presence of various functional groups involved in reducing Ag metal ions into Ag nanoparticles onto the surface of the composite. Batch experiments executed adsorption and sono-adsorption studies on WBC and Ag–WBC composites, and the results revealed that under optimum conditions, that is, pH= 3, adsorbate concentration= 10 mg L−1, adsorbents dosage= 0.05 g, time= 90 min, and US power = 80 W, the phenol removal efficiencies onto Ag–WBC composite were 78% using sono-adsorption compared to the non-sonicated adsorption. Langmuir and Freundlich isotherm models for fitting the experimental equilibrium data were studied, and the Langmuir model was chosen as an efficient model for the sono-adsorption process. The feasibility of the sono-adsorption process was also evaluated by calculating kinetics.

23 March 2022 in Polish Journal of Environmental Studies
Verified
Journal Article
Closed access
PDF file
SNShoaib Nawaz
Shoaib Nawaz
MSMaria Siddique
Maria Siddique
RKRomana Khan
Romana Khan
Nadia RiazNadia Riaz
Nadia Riaz
UWUmmara Waheed
Ummara Waheed
Asmat AliAsmat Ali
Asmat Ali
In the present study the ultrasound (US) and ultrasound-assisted hydrogen peroxide, and iron sulfate mediated Fenton process (sono-Fenton) was carried out for the degradation of the Congo red (CR) dye. Degradation rate, COD removal, and degradation mechanism of dye in the combined process were studied and the factors affecting the system performance i.e., pH, initial dye concentration, ultrasonic power, time, and effect of variations in concentrations of hydrogen peroxide and iron sulfate were also investigated. The results showed that the dye degradation and COD removal in the sono- Fenton process was 83% and 89% after 60 min of contact time and the coupling process was more efficient and synergistic compared to the respective individual processes. The extent of CR removal increased with increasing the US power and concentration of FeSO4, and H2O2, to an optimum level but decreased with increasing dye concentration, and the optimum conditions were found as pH = 3.5, dye conc. = 25 mg L-1, US power = 80 W, time = 60 min, H2O2 conc. = 5 mM, FeSO4 conc. = 25 mg L-1. As revealed by GC–MS results, the sono-Fenton treatment of CR, for 30 min resulted in the formation of byproducts that were finally degraded to small molecules within 60 min of contact time. The synergy of the sono-Fenton process in comparison to respective individual processes is attributed to the increased generation of •H and •OH radicals. The study demonstrated the potential use of the combination process ‘sono-Fenton’ for the efficient decontamination of water from dye pollutants.

4 May 2024 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
Asmat AliAsmat Ali
Asmat Ali
ZUZahid Ullah
Zahid Ullah
NINayab Ismaeel
Nayab Ismaeel
ARAbdur Rashid
Abdur Rashid
WKWarda Khalid
Warda Khalid
JGJunaid Ghani
Junaid Ghani

29 May 2023 in Genes
Verified
Journal Article
Open access
PDF file
MZmuhammad zeeshan zafar
muhammad zeeshan zafar
MTMuhammad Hammad Nadeem Tahir
Muhammad Hammad Nadeem Tahir
ZKZulqurnain Khan
Zulqurnain Khan
Muhammad SajjadMuhammad Sajjad
Muhammad Sajjad
XGXiangkuo Gao
Xiangkuo Gao
SRShoaib Ur Rehman
Shoaib Ur Rehman
The fibrillin (FBN) gene family is widely distributed in all photosynthetic organisms. Members of this gene family are involved in plant growth and development and their response to various biotic and abiotic stress factors. In this study, 16 members of FBN were identified in Glycine max and characterized by using different bioinformatics tools. Phylogenetic analysis classified FBN genes into seven groups. The presence of stress-related cis-elements in the upstream region of GmFBN highlighted their role in tolerance against abiotic stresses. To further decipher the function, physiochemical properties, conserved motifs, chromosomal localization, subcellular localization, and cis-acting regulatory elements were also analyzed. Gene expression analysis based on FPKM values revealed that GmFBNs greatly enhanced soybean drought tolerance and controlled the expression of several genes involved in drought response, except for GmFBN-4, GmFBN-5, GmFBN-6, GmFBN-7 and GmFBN-9. For high throughput genotyping, an SNP-based CAPS marker was also developed for the GmFBN-15 gene. The CAPS marker differentiated soybean genotypes based on the presence of either the GmFBN-15-G or GmFBN-15-A alleles in the CDS region. Association analysis showed that G. max accessions containing the GmFBN-15-A allele at the respective locus showed higher thousand seed weight compared to accessions containing the GmFBN-15-G allele. This research has provided the basic information to further decipher the function of FBN in soybean.